Today, we hardly keep up for the development of digital technology. Take at least TVs. As it was just before - I connected it through the cable to the satellite antenna and that's it. Digital television allowed to evaluate the loved films in a new way: excellent quality, no interference, as it was in the old TV. In addition, it appeared, finally, the ability to break away from the computer monitor and enjoy the video of the Internet network on TV. The question arises how to do it. Of course, in the instructions for TV, manufacturers explain how it is being connected to the home and global Internet, nevertheless, not every clearly present, how to connect a router to a TV.

To begin with, a bit of the theory necessary to connect the TV to the Internet through the router.

LAN-connectors, built-in Wi-Fi adapters, new multimedia features allowed to create a local network home and transmit files and streaming video without downloading. However, it is obvious that no matter how "smart" is not a TV, it cannot connect to the Internet, because it does not have built-in L2TP clients or PPPoE to receive relevant network protocols.

The router is a router through which the home network data packet is redirected, which allows you to combine all the available devices and provide access to external packages, that is, to the Internet. In other words, it helps competently manage home network. He can be a Wi-Fi point.

Connecting cables to the router (rear view).

TV, unlike the router, does not have such functions. It can only act as a separate device inside the home network and the internal or external module of Wi-Fi is needed to connect to it, or the connections cable.

So there are two options for connecting a router to a TV to access the Internet:

  • through a TV router by cable;
  • through Wi-Fi.

Let's witness step by step, how to connect the TV through the router to the Internet, in each of these cases. Let's start with the first one through the cable. When connected via the cable, the following scheme is used:

Connection diagram through cable.

To connect TV to the Internet via the router, it should have a free LAN port, since the TV connects to the router through the UTP modifications cable. As a network connector, you can buy a simple patchcord Cat 5:

Cat 5 patch.

In one end, it is inserted into the LAN port on the router, the second is to the corresponding Ethernet port on TV.

This method has a certain disadvantage, because sometimes you have to pull the cable throughout the room. An excellent output from the position will be two PowerLine adapter (PLC), then the transmission of signals will occur by electrical outlet. Another option is to give preference to television via WiFi router.

TV connection configuration

Immediately note that connecting to the network of TVs of popular models, for example, Samsung, Panasonic or others is performed according to one scheme:


The system can give the message "Error", then the setting is performed manually. To do this, the "Network Status" item is found in the menu, then select "IP Setup" and introduce data for the entrance received from the provider or technical support.

Settings You can close and check the availability of Internet access, for example, run YouTube-widget or open any browser.

Connecting TV via WiFi

The WiFi support router must correspond to the transfers of the Internet connection provided by the provider. For example, in the case of a dynamic IP, the router must maintain the DHCP protocol. Only in this case the TV will be automatically assigned to the IP address, DNS, etc. Imagine what will be in each change IP enter them manually.

Today, the most demanded routers of such manufacturers like D-link or Asus, etc.

In this case, in addition to the WiFi router, an additional device is a WiFi adapter. In the new TV models, it is already provided. But even if there is no built-in adapter on your TV model, you don't have to do from this problem - everything is solved very simple: it can be purchased separately. The external access point will serve as no worse than the built-in device. Such a device can be bought at any store where both computer equipment, and for a completely acceptable amount.

Select adapter

Mandatory condition when buying a WiFi adapter - it must be original. In other words, it should be released by the same manufacturer as the TV, say, Samsung manufactures WiFi adapters for their TV. In the instructions for TV, as a rule, all its specifications are discharged. For example, the samsung's LED TVs is suitable for an external Wi-Fi-Adapter, which supports the EEE communication protocol with the data exchange of Wi-Fi I802.11a / B / G / N. It is connected to the USB port located on the TV panel.

Example: USB WiFi SAMSUNG adapter.

Setting

Configuring WiFi Connection

The setting starts from selecting the parameters of the TV. Perform a chain of action: "Menu" → "Network" and further "Network Settings". Then, from the drop-down menu, select the wireless connection type and then from the Wi-Fi network opened list, click "Continue".

Usually connecting to the network passes in automatic mode, so you need to wait a bit.

If, nevertheless, the message does not appear on the screen that the connection settings are completed, it means that the automatic receipt of network parameters failed. The setting will have to be performed manually through the "IP settings", but by selecting the manual mode. Enter network data in the appropriate fields and wait for the connection check.

In the case when your devices have support for WPS technology, the connection is even more simplified: both on the router and the WPS settings menu, the WPS item is selected.

There are models of routers that support other technologies, for example, One Foot Connection or Plug & Access. For them, the connection procedure becomes trivially simple:

  • ONE FOOT CONNECTION. You select this type of connection and by clicking "Continue", install the router near the TV, not further 25 cm and wait until the connection is established.
  • Plug & Access. The formatted USB flash drive is inserted into the router. When the indicator stops flashing, it is removed and inserted into the TV.

As you can see, connect the router to the TV most easily.

And now for greater clarity, we present to your attention a small instruction, how they connect the TV to the router via WiFi on the example of the Samsung smart TV.

Connecting Samsung TV

First of all, you need to choose the right and connect WiFi router.

Samsung began to produce special routers that have automatic transmittance. Such routers are able to select the widest possible channel for streaming video, which comes from the Internet. If you decide to purchase exactly this, pay special attention to the specifications. The router only works with the TV models that are included in the range of the specified series.

Sample TV Connection Scheme via Wi-Fi Device - Router with an adapter inserted into USB port is shown below.

Sample TV connection scheme via Wi-Fi - Router with an adapter inserted into USB port.

Setting up router

Configure WiFi Router for Smart TV is not more complicated than the most ordinary router.

  1. To begin with, the router is connected using a patchcord to a computer and set an IP to automatically in the domestic connection settings.
  2. Patchcord from the computer is connected to one of the Ethernet inputs, and the Internet cable, respectively, in the Internet.
  3. Digit the address 192.168.0.1 in the browser, go over and configure a router to work in a home local network and with an external Internet network.

TV connection

  1. To configure the connection requires a remote control. It activates the "Menu" button;
  2. Next, go to the "Network" point, select "Network Settings", then pumped on "ENTER";
  3. Go to the "Wireless" item.

  4. On the screen, all discovered networks are displayed on the screen, of which they choose their own, click on "Next".

    Select the access point on TV

  5. If the wireless LAN is password protected, an empty window with a keyboard for data entry should be opened.

    The cursor controls the arrows on the remote. Through USB, you can also connect the keyboard or just a computer mouse. Undoubtedly, it will be more convenient.

  6. Then the connection setting should begin. In the case when the connection was still not installed, you need to go to the IP settings, then reaffirm the request for receiving the address in automatic mode.

  7. If, in order to follow the security of a local network, it is configured to assign an IP address in manual mode or in the case when the DCHP server function is not provided on the router, you can assign your address in the TV router, and then it is customized on the TV itself, as already described above.

In the network settings menu there is a "WP" item. With it, the connection configuration is automatically executed, if a similar function is supported by the router. It is easy to check: the same button should be on the router.

If this is such, you choose the corresponding point on the TV, click on the "WP" button on the router and hold literally 10, from force of 15 seconds. It is enough to automatically configure the connection.

When using the SAMSUNG router, you can use the One Foot Connection option.

You need to go to the appropriate menu item and wait for the connection.

Video

Found a typo? Highlight the text and press Ctrl + Enter

Today, no one is not surprised by the SMART TV technology and the built-in WiFi network card (Wi-Fi) to access the Internet. Many users ask how to properly connect the TV to the Internet via Wi Fi (Wi Fi) network?

First of all, you need to configure the distribution of the Internet through Wi Fi (Wi Fi) on your modem or router (register access attributes, passwords). After that, you can go to the TV settings. Here everything is actually very simple and easy.

Next, I will tell on the example of the Samsung TV. To adjust on the remote, click the "Menu" button and in the window that opens you need to go to the "Network" subsection, where you need to select the next menu item "Network Settings".


After that, the TV itself will be offered to search for available connections, for this click "Start". After that, we need to choose a type of network that we will customize our connection (cable, wireless and others). In our case, you need to choose "Wireless" after which click "Next".


The TV in automatic mode is searching for wireless networks. Next, the TV on the choice offers to choose one of the available networks, select the desired and enter the password (network access key).




Next, 99% of the settings occur automatically, but if it did not happen, then you need to register IP addresses in accordance with the requirements of your network manually by going to "IP Setup" item.


After completing the settings, we leave the menu and press the "Smart" button and enjoy the possibilities of the TV on the Internet.

Congratulations, now you have successfully learned to connect the TV to the Internet via Wi Fi (Wi Fi). You can freely use and enjoy interesting gears.

Depending on the manufacturer, intelligent TVs have different connection interfaces that can be divided into the following categories:

USB port. It serves to connect external hard drives, flash drives, USB Wi-Fi adapters (more expensive models are equipped with built-in Wi-Fi);
Ethernet port. This port is used to connect a wired network via the network wire twisted pair (patch cord);
HDMI port. It serves to transfer high-definition video (Full HD permission);

D-SUB connector to work as a computer monitor.
Of course, it is not necessary to do without the usual antenna entry of RF In for cable television. Recently began to abandon outdated SCART ports, Ci slots and composite connectors (bells).

Connecting to router

So, we have the following scheme - the apartment includes ADLS channel, the connector of which is connected to some multiple port router to which the computer is connected to access the Internet. The router is equipped with a Wi-Fi adapter. Our goal is to connect the TV to this router so that the network has access to the network, and the computer (or several computers is not important).

home network
Connection options at least two - via Ethernet port (wired), or via Wi-Fi (wireless). First consider wired connection.

Ethernet TV connection

We take a router in your hands, and look at the rear panel.

Rear panel router
We find LAN ports. They are usually signed.

Attention! The rear panel of your router may differ from the above, it all depends on the manufacturer and model, but it is always necessary to look for the LAN port, it is on all models.
It may happen that Lan port is only one, and he is already busy. In this case, we use a hub and a switch for "reproduction" of the port.

Patch cord
Turn on both devices. On the TV remote control, press the "Settings" button. Select the menu item "Network", next submenu "Network Setup: Wired".

First network setting step
Setting the wired network, step 1
On the remote, click "OK", and go to the second step - setting up the network address of the TV.

Setting the wired network, step 2

The IP address can be configured in manual, but it is necessary only in rare cases when it requires a computer network (static address, non-standard subnet mask, etc.). If such requirements are not extended, then boldly put the "Auto-tuning IP" mode, and the TV itself will coordinate its address with the router without your participation.

The same applies to the DNS server - we leave on auto-tuning. Click "OK".

All, wired connection is installed, you can go online directly from the TV, running the built-in web browser.

Wi-Fi Connecting TV

But much more convenient to install Wi-Fi wireless network. More convenient for many parameters - no spheering wire interior, the setting is made without getting up from the sofa, in some cases above the transfer rate (standard "N"). Consider how to connect the TV to the router via Wi-Fi.

First of all, read the instructions for the TV, whether it is equipped with a Wi-Fi wireless module. If yes - lucky, if not - you need to purchase a separate Wi-Fi adapter.

Wi-Fi smart TV adapter
We connect it to any USB SMART TV adapter.

First network setting step
Setting the wireless network, step 1
TV will offer several options for further configuration.

Setting up a wireless network, step 2

Total three options:
"Setup from the list of access points (AP)". This option requires knowledge of its access point, since when it is selected, it will be necessary to enter the name of the wireless network and additional parameters;
"Simple installation (WPS-button mode)." The most convenient continuation of the setting. When it is selected, the TV itself will start searching for all Wi-Fi networks available, from the list of which you can choose the necessary you;

"Network configuration ". Direct TV connection to a home computer without access to the Internet. For example, to view movies or photos stored on a computer.
When selecting the second item, a list of available networks will appear, select the necessary one.

Setting up a wireless network, step 3

If a wireless network is protected by a password - a window will appear with the requirement to enter it.

Setting the wireless network, step 4

Click "OK". All, wireless connection is installed.

Connection complexity

In this section, consider the possible difficulty of connecting via Wi-Fi.

The first possible trouble - it fails to configure Wi-Fi. To search for a fault, we take any wireless device (laptop, smartphone, tablet), and install software for directly connecting to it. This software is on the TV installation disk, or you can download from the manufacturer's website. For example, for the Samsung TV, this program is called Allshare. After installing the TV, connect directly (the third item in the menu). If it works - Wi-Fi is in order, if not, the output suggests itself for itself.

The second reason - on some TV models, the automatic network search feature is disabled. Carefully learn the instructions and check this parameter.

The third reason is the network installed, but there is no access to the Internet. Check on the DHCP server router, try to disable it and configure the TV on the manual IP address - IP address 192.168.1.2, subnet mask 255.255.255.0, gateway # router #.

The cause is the third - make sure that the purchased Wi-Fi adapter is really compatible with your TV model.

And the last, universal, tip - try turning off and on to turn on both the TV and the router, sometimes helps to adequately detect each other.

Connection setup

To begin with, you need to decide what the TV will connect. You have to have access to the Internet "Internet" on a wire or wireless (Wi-Fi).

So, proceed to the setting.

Remote Control

By clicking on the Menu button on the remote control, you will go to the TV settings section. Control is carried out by arrows on the remote, there is a confirmation key (input). We are interested in the item "Network".

Configuring TV connection to the network

Go to "Network Settings". First of all, you need to choose which network will be connected to the device: wireless (Wi-Fi) or wired (Ethernet cable).

Connecting through cable

If your TV has a jack to connect the local network cable, you can connect to the router (router) and thus access the Internet.

Connecting LAN Ethernet Twisted Couple

So, the cable is connected. In the network settings, after selecting the connection, click the "Connect" button.

In case of success, a window will appear, where it will be indicated that the connection is set.

Internet connection is installed

If the cable connector is present, and the TV is not SMART, you can connect to the local network and use the computer video audio files as a storage. The DLNA service is configured on the computer and the TV has the opportunity to use this storage.

Connection via Wi-Fi (wireless)

If you have a wireless connection available, then after selecting this item, a list of available networks will appear on the screen. Select the desired and confirm the input button.

Selection of Wi-Fi network

Currently, most Wi-Fi networks are already protected by passwords. (network broadcast icon with lock). Therefore, to connect, you must enter the correct password. This is done in the keyboard window, which appears on the TV screen.

Enter Password Wi-Fi

After entering the input, click the "Finish" button. If everything went successfully, then before you, as well as when using the Wire, the window will appear about connecting to the Internet.

Internet Services for TV (Channels, Weather, Skype)

After successfully connecting to the Internet, you can use all the features of Smart TV. SAMSUNG TVs have a multi-colored Smart Hub button on the remote control.

By clicking onto it and clicking on the View Window, you will see a list of installed channels, games, applications, social networks on the screen.

SMART TV Application List

YouTube, Ivi, Zoomby and others are present in the list. There are channels such as STS, NTV, first, homemade, music channels, etc.

Music Channels

Channels are usually used not online broadcast, but in the library mode where you can choose to view the necessary transmission, TV series or film.

Some applications allow you to listen to the radio station.

Channel subscription payment

Many free channels (periodically you have to browse advertising). To others it is necessary to issue a subscription, pay for its proposed ways and watch without restrictions.

Additional bonuses

As an additional application on the TV there is a program that can produce through the Internet alert of the host of the house about the movement within the range of the action of the camera built into the TV (the outer chamber will have to be purchased separately).

Thus, the TV now increasingly replaces the computer. Given the possibility of connecting a wireless keyboard and mouse, the differences from work on the computer will be minimal.

The crazy technological jerk of the 21st century led to the fact that even advanced users of electronic gadgets do not have time to track constantly updating functionality of computer and Internet devices.

What to say about the older generation representatives, for which the lack of paper step-by-step instructions for a new TV is tantamount to the catastrophe. Especially if it's a "smart" TV or Smart TV. It is these TVs that have the ability to connect to the Internet (via Wi-Fi or cable) and allow them to establish all useful applications on them.

Today, even a child will be able to figure out any smart system independently, but in order to use all its possibilities with maximum efficiency, it is better to do so meaningfully. Therefore, here we will deal with how to quickly connect your new TV, Smart TV to the home network and the Internet via Wi-Fi router.

To do this, you will need:

  • tV with one of the operating systems: WebOS, Tizen or Android OS. WebOS installed on LG smart TVs, Tizen is designed for the latest Samsung models, Android uses Sony, Philips, and many other manufacturers;
  • Configured via connected to high-speed Internet;
  • uTP network patch cord - in the case of a TV cable connection;
  • compatible Wi-Fi adapter - for old TV models, in which there is no built-in Wi-Fi. The compatibility of the adapter with your model of the TV can be found from the instruction in which it is usually indicated: "Wi-Fi Adapter for LG Series 4 TVs".;
  • remote control.

Important: To view movies and television programs online in good quality it is necessary to ensure a stable and sustainable and high-speed Internet connection. If the Wi-Fi router is located at a significant distance from the TV (on the other floor of the house, in the attic, etc.) it makes sense to buy a long patch-cord UTP. Cable connection will require more time and effort, but will give guaranteed picture quality on the screen.

Connecting and configuring the Internet on the TV.

Make sure the Wi-Fi router is turned on (green light bulbs flashes). If you decide to connect to it cable, connect the patch cord one of the router LAN ports and the corresponding TV connector.

If the TV is not equipped with a built-in Wi-Fi, insert a Wi-Fi adapter into the USB connector. Take the remote control and go to the Internet settings on the TV itself.

Important: All operating systems work according to one principle. Whatever the OS is installed on your smart, you should go to "Settings" and find the "Network" section.

  1. select "Network Settings" in the menu and click Start. The operating system will start looking for possible connection options;
  2. a new menu will appear on the screen, offering choose the connection type: cable, "wireless", "WPS";
  3. by selecting "Cable", you will only wait for the connection and exit the settings. The WPS connection is available only on those devices that support this feature - if your TV and router are from their number, select it in the menu and press the corresponding button on the router - the connection will automatically. In the case of a wireless connection, a list of available Wi-Fi networks will appear on the screen;
  4. select the required network and click "Next", "OK" or "Connect" (depends on OS);
  5. if the network is password protected, enter it in the pop-up window;
  6. click "Finish" or "OK" and exit the settings;
  7. check how the connection works - open, for example, video on YouTube.

IMPORTANT: Connecting to the home Internet network SMART TV with a DLNA function allows not only to watch movies online, but also to play records from computers connected to the same network, tablets and laptops - use all available features of your TV!

Common Internet connection problems (LG, SAMSUNG, TOSHIBA, PANASONIC, etc.).

Slims in the work of Smart TV occur for various reasons and are accompanied by all sorts of information prompts, which in different operating systems look similar to each other. Most often, the problem sounds like "no network connection" or "Network is not available." What to do?

Practice shows that most often restore the connection to the Internet is manifested by the usual reboot of the router - it is enough to turn it off from the power supply for a minute or two. Under the cable connection - check the contact (the lamp of the corresponding LAN port should be lit). If the problem did not disappear, you should contact the provider.

Greetings, friends!
Today we will talk about how connect the TV to the Internet via WiFi Router And how to do it with a cable. I am sure, many of you have a modern LCD TV in the house, but much fewer people know that their similar unit has a built-in opportunity to go into the worldwide network.

First of all, you need to decide how you can connect the TV via the Internet - if it comes to modern TV, it is either the built-in WiFi module, or only a cable. There are also models with support for an external wireless USB module, as a rule of the same manufacturer as the TV itself.

In order not to be unfounded, I will show the entire diagram of the TV connection of the TV through the WiFi router on a particular example from the Samsung firm, which is in my apartment. But also from other manufacturers - the same LG - there is also a great many models working with Smart TV. When connecting through the cable, the Internet signal will be better and more stable, with a wireless type - interference is possible, but it is not necessary to pull any wires through the entire apartment. In this case, televisions with built-in Wi-Fi are most often equipped with a RJ-45 connector for cable connections. The choice is yours!

TV with wifi module or without?

All TV can be divided into several categories:


How to connect the TV to the Internet via a cable router?

After you have overcome the painful TV selection process, the most difficult thing begins - setting up and connecting the TV via WiFi to the Internet. If you have chosen a more stable Internet connection through the cable, that is, several options.


Connecting the Samsung, LG TV or any other company to the Internet (models of other manufacturers work with Smart TV in the same way) and with a more complex routing system, for example, when using a joint access device.


The theory figured out, go to practice. Stick all the wires, according to the above schemes. After that, on the remote control, press the "Menu" button.

Select the item Network\u003e Network Settings and click the "ENTER" button.


It is worth noting that your router must have the support of automatically drown IP addresses for connected devices on a network or DCHP server. Otherwise, all parameters will be administered manually. Also, you will also have to prescribe an IP address, a gateway and a mask if you inserted an Internet provider cable directly, bypassing the router. To do this, you have to click "Setting IP"

How to connect tv to a wifi router?

Now consider setting TV models with Internet access via WiFi. For this, the router is required in the apartment - the scheme will look like this:

A sample is shown with a WiFi adapter inserted into the USB port. If it is built, then nothing additionally connect to the TV.


Go through the remote control in "Menu\u003e Network\u003e Network Settings". And now we are going to "Wireless (General)"

A list of discovered networks opens. Choose your own and press "Next"

The window opens with the alphabet to enter a password for the connector to the network. To control the cursor, use the arrows on the console, or simply connect the usual computer mouse via USB or even clave - it will be much more convenient.

After that, the connection is started. If it did not work, and you have an automatic IP distribution on the router, go to the IP settings and confirm the "Automatic IP Address" item again. If your router is not equipped with a DCHP server function, or for security purposes, the network is built with manual assignment of IP addresses, then assign your address to the TV in the router and then make it setting on the TV itself, as shown slightly higher.

Almost all on this with the settings. There is another item in the TV setup menu - WPS. It is designed to automatically configure communication if the function is supported by the router - for this, it should be present to the WPS button.

If it is, then select "WPS (PSK)" on TV and press the button on the router. Hold its seconds 10-15, and this will be completed automatic connections.

There is another feature - One Foot Connection. It provides an easy way to connect the Samsung TV to the router of their own production. If you have a router for this company, then just go to this menu item and wait for the automatic connection.

Finally, if your TV does not have an embedded wireless network adapter and no external, then you can purchase another special device - TV console on android with SMART TV and WiFi support, which will take the functions of receiving files from the device on which the program is installed Server, and a TV connected to it by one of the usual cables, such as HDMI or tulips, will simply act as a screen.

Finally, when all settings are made and accessing the network, go to "Menu\u003e Support\u003e Smart Hub".

Smart Hub is a special service installed on a telephone with which you can get direct access to useful and entertainment sources of information, applications and services from the Internet. Including here there is a built-in browser through which sites can be visited and watch video, for example, from YouTube. It will make this task connected to the TV and mouse connected to the TV.

Well, work with this application is a completely different story ...

Possible problems when connecting TV to the Internet via WiFi router

During operation, when connecting to the network, errors may occur. How to fix them?

  1. Disable TV from the network and turn on again
  2. If it does not help, reset the SmartHub settings. This is done like this:
    • Go to SmartHub.
    • Press the "Tools" button on the control panel
    • Go to "Settings\u003e Reset" section
    • Enter the PIN code "0000"
    • Wait for discharge, agree with the license agreement and the confidentiality agreement, after which the application will reinstall
  3. If it did not help, then update everything on the TV. To do this, go to the "Menu button\u003e Support\u003e Update by\u003e Network". Wait for the update and use. If the network cannot be connected at all, then you can upgrade from the flash drive, which is pre-downloaded from the Internet the latest firmware version for your model.

Good day Dear blog readers Website. Today I want to tell how to connect the TV to the Internet via WiFi Router. The fact is that in recent times there are popular TVs with a smart TV function. They allow you to go online, use various applications and, accordingly.

After purchasing such a functional TV, many people think about how to connect the TV to the Internet. In most modern devices, this task can be solved in two ways:

  • on cable;
  • via wifi (wireless).

The next step is to configure the router. Under the setting, I understand the connection to the Internet, the creation of a wireless network with the subsequent name and, accordingly. I will not tell in detail how to set up a router, because for this it was written separate from which you can find on the pages of my blog.

So, almost all preparatory work performed and now it is necessary to finally decide how to connect the TV to the Internet via WiFi Router. As mentioned above, it is possible to configure the network on the cable and on the WiFi network. In fact, both ways differ from each other, and I will try to tell a little about each separately.

How to connect the TV to the Internet via WiFi Router

In order to configure the wireless connection, you actually do not need anything other than the console and information about how your wireless network is called and what password it has. Below I will give a description of all actions on the example of the most popular Samsung TVs with the Smart TV function.

To begin with, turn on the TV and go to the main settings, for this, on the control panel, press the corresponding button on the control panel. After the panel is displayed, select item net, and then network configuration. Next, the menu will be asked how to connect the Internet to the TV, respectively select the wireless connection.

The search time will take some time, after which the list of networks that are around are displayed. You will need to select the appropriate, click the OK button located on the control panel and then enter the password from the wireless network. After some time, on the screen of your smart TV, information about the successful connection and data include the IP address, poppy address, etc.

If everything went successfully, you can exit the settings menu and start using all installed applications. If for some reason you have wanted to install additional applications, but do not know how to do it, I advise you to read the appropriate, where I described the entire sequence of actions in detail.

During the connection setup, the situation may occur that it failed. In this case, I advise you to try several times, but before you double-check all the data, especially the password. The fact is that, depending on the model of the router, such a confusion can sometimes manifest itself.

It happens that your router may be weak and interfered by other networks poorly affect bandwidth. The situation can be solved by choosing and.

How to connect the TV to the router by cable

The second possible way to connect the TV to the Internet through the router is the use of a twisted pair cable. This method can only cause difficulties if the router is removed from the connected device to a fairly long distance and the cable laying under the plinth can be needed.

In my opinion, this method is more preferable, since the resistance of communication over a wireless connection can be violated due to the presence of thick walls and diverse furniture (in more detail about what affects the quality of the signal and why the speed may fall, read in separate). The only thing that can happen to cable is a break, but it is very simple.

If for some reason the cable does not have at the ends of suitable connectors, but only a bare wiring is visible, then it is worth producing you can perform yourself.

After all connections are made, go to direct television to the Internet. For this, as in the first version, open the network settings menu and select the connection over the cable.

No passwords do not need to enter. It is enough just to wait for the IP address and the final confirmation that the connection is established.

Actually, on this all actions and end. With the choice of fashion, you can only decide on your own, since it depends on the purely of individual preferences. If you have questions about how to connect the TV to the Internet via WiFi Router, I will gladly try to answer them.