The speed and stability of the wired compound often make it more preferable in comparison with wireless technologies. Connect the laptop to the Internet through the cable sometimes more convenient than Wi-Fi. For example, send a phone network file from a computer to a laptop and back significantly and more reliable than using a wireless communication.

There is nothing complicated in the cable connection. Enough a wire, laid by the provider on the side of the subscriber, insert into the appropriate PC connector, laptop or router.

Configuring the cable Internet may differ depending on the type of connection and to a lesser extent from the operating system. For Microsoft products, noticeable differences are only in the Windows XP interface in comparison with more modern versions.

Next, consider the main important points you need to consider when connecting the wired Internet. Sequence of actions to configure the most common types of cable connections in the Windows environment.

Selection of provider

Before you need to configure something, the Internet is indoors. Suppliers of communication services will help, from the correct choice of which the further comfort of stay on the network depends. In the process of studying options, it is important to take into account the following factors:

  • The ability to carry out the network cable on the side of the subscriber;
  • The cost of connection and services provided;
  • Terms of tariff plans;
  • Availability and efficiency of responding service support;
  • Shares, bonuses, discounts provided by the provider.

Tariffs, promotions, connection availability - all these information most companies operators are placed on their sites. About the quality of communication and support is better to ask the familiar who use the services of the provider of interest.

Video tips on the choice of Internet provider:

Deciding with the choice, it is necessary to submit an appropriate application. This can be done by phone, on the company's website or personally, visiting the office.

Types of wired connection

Methods of cable access to the network are distinguished depending on the equipment used, cable and software technologies. To choose the most profitable and convenient option, you must first get acquainted with the existing varieties of the wired Internet.

  • xDSL is a connection via a telephone line using a splitter to separate voice and Internet data frequencies. Maximum speed (ADSL) 24 megabita.
  • FTTB - optics in the building. High-speed method used in multi-storey buildings. From the provider to the apartment building, an optical cable is paced, connected to the switch, from which the layout of the Ethernet patch is made to the subscriber apartments.
  • xpon - a fiber optic cable is performed into the house, connect it to a special router with an optical input, which is wiring Ethernet. The most promising and high-speed option (up to 1 Gb / s).

Setting up a laptop for connecting the Internet by cable

Configuring the system depends on the hardware and network protocols used by a specific operator. When configuring client equipment, DHCP and PPPoE are most often found.

Dynamic or Static IP (DHCP) - Settings for Windows

First you need to directly connect the Internet to the client device through the provider cable. If the connection does not work properly, a yellow exclamation mark will be displayed on the network connections icon. This denotes that the cable is connected, but there is no connection to the Internet.

Editing network connection options can be corrected. To do this, make the right click on the appropriate icon in the field of notifications. In the menu that appears, click on the Network and Common Access Control Center.

On the page that opens, we look at the navigation on the left, go to the section Changes in the adapter parameters. We highlight the connection on the local network, which indicates the name of the network card, usually this is the realtek or atheros models.

We click on the right mouse button and in the drop-down menu click to the item "Properties".

The connection options will open in which you make a double click on the "IP version 4" parameter or highlight it with one click of the right mouse button and click "Properties".

Then you need to configure TCP / IPv4 Internet protocol. Depending on the technologies for building a network used by the provider, there are two options: dynamic or static IP.

Dynamic IP. If a DHCP server works on the provider side or it specifically indicated that you need to use a dynamic IP in the connection parameters, then the protocol options are activated by the "Obtaining IP address automatically" switch and "Get the DNS server address automatically". I confirm by pressing "OK".

Static IP. In this case, the operator must provide the following data: IP address, subnet mask, main gateway. In addition, the DNS servers addresses can be provided. To fill the appropriate fields, you must enable the "Use the following IP address" and "use the following DNS server address".

If all the necessary parameters were specified correctly, the connection will be installed automatically after connecting the cable.

PPPoe

In this case, the provider does not provide an IP address, but authorization data - a pair of login / password. To connect a laptop to the Internet via a network cable using PPPoE technology, you need to add a new connection in the Network Management Center and Common Access.

If everything is done in accordance with the above instructions, and the correct user authentication data is entered, you can press "Connect" and enjoy the comfort and speed of the cable Internet.

PPPOE connection video on Windows 10:

The fact that today is becoming increasingly distributed to the Internet wireless connection based on the use and ADSL modems), no doubt causes. But sometimes (and very often) it is necessary to configure the connection, bypassing such devices using the direct connection to the provider to the provider by means of a cable. About how to connect the Internet through the cable, then talk. Immediately it is worth considering some nuances, as well as the emergence of possible problems, errors or failures of the connection being created, which will be considered separately.

How to connect the Internet through the cable: What is needed for this?

The main and prerequisite, without which it will be made simply impossible, is the presence of a installed network adapter on a computer or laptop, for which all the necessary drivers must be installed (sometimes you may need to update to topical versions).

Of course, any of the latest Windows operating systems sets such drivers on their own (either when it is initially installed, or when a new connected device is detected), but in case you have an original disk with a set of such a managing software, it is better to install "native" device drivers It is from this set.

Only in this case, the operability of the network card will be guaranteed entirely and completely. Issues related to updating drivers, consider a little later, but, closing a little ahead, it should be said to be not recommended to produce an update by means of the system (then it will be clear why).

The second point is associated with the cable used, which will join directly to the corresponding port of the network card. On such cables there are RJ-45 connectors. Finally, the user must have a contract with a provider, which not only provides access to the Internet, but also gives a preliminary list of all major settings and addresses that will need to be prescribed independently if the support service specialist does not.

In general, by and large, if you understand how to connect the Internet through the cable from the router or modem, there is nothing particularly difficult here. If you wish, any user who has at least the slightest idea of \u200b\u200bworking with Windows-systems, perform such operations can independently. And it will take all this process with only a few minutes. Why was it mentioned in this case that you can use the cable from the router? Yes, just because it is fully identical to the standard network cords that are on sale in any specialized store.

How to access pre-network settings in different systems?

So, it seems to be determined with the equipment. Now let's look at some basic settings and ways to access them in different Windows modifications. If we talk about how on a computer to connect the Internet through a cable from the router in Windows XP, in this system, access to network parameters can be obtained directly from the start menu, in which there is an appropriate item made in a separate category. In later versions, it also has, but is not the main list, but in the service program section. In Windows 10, the easiest way to use the PCM on the Start button, where in the list and will be shown the desired section. In general, for all systems, without exception, you can use a universal tool in the form of a "control panel", in which you need to go to the section of network management and shared access, after which it will be necessary to refer to the link to change the properties of the network adapter.

In this case, we are interested in the one for which the description indicates Ethernet or "Connection over the LAN".

The difference between dynamic and static IP addresses

Let us leave any questions regarding how on the computer connect the Internet through the cable, aside, and look at one important nuance. Usually providers offer to create a connection to use two types of addresses: static and dynamic. The difference between them is not so great, as it may seem at first glance. The static address is assigned to each individual computery and in the process of accessing the Internet does not change, that is, it is constant. The dynamic address is changed at each session (it is installed in its new value).

Some mistakenly believe that it is akin to this, nothing like that! VPN clients or proxy servers simply change external addresses so that the user machine cannot be identified by territorial binding, and there are no relationships to internal addresses. Changing the address is made with the choice of the currently unused IP from the available addresses of the provider itself, which in no way affects the change in regional location. But which one to choose if the provider really proposes to use either one or the other? It is believed that the best quality of communication is ensured solely when specifying a static address, so choose this option, although in setting the dynamic addresses and look somewhat easier.

How to connect the Internet on your computer via cable in Windows 7 and other systems: Standard connection setup method

To set the Internet connection, the first thing is necessary through the PCM on the selected network adapter, call the properties item and then go to the IPv4 protocol settings. Address fields must be filled according to the list issued by the provider.

However, if you don't have it for any reason, or you lost it, in the IP field for a static address, we write a combination, say, 192.168.1.3, the subnet mask almost always has a value of 255.255.255.0, and in the gateway field, write 192.168. 1.1. For dynamic IP, if it is provided, you can set the receipt of all addresses in automatic mode.

Just below, you should fill in the fields of addresses of the main and alternative DNS servers. They will have to clarify the provider. If this turns out to be impossible, nothing terrible. Set automatic receipt or use free combinations, for example, from Google, presented above, which are not worse. Next, just save the changes, just in case, restart and check Internet access.

Note: Especially when configured, pay attention to the proxy shutdown item for local addresses if the server's use of this type of provider is not provided, otherwise problems may appear.

Installing high-speed connection

Now briefly on how to connect the Internet through the cable, if you intend to configure the high-speed PPPoE connection. In this case, in the Network Management section, you first need to create a new connection, and then specify its type.

It will be either PPPoE for direct communication with the provider without using network devices, or dial-up if modem uses, for example, 3G / 4G standards. After that, you need to enter the username with the password and set the new name of the compound created. Upon completion of all procedures, simply click the Connection button.

What to pay attention to when using the router?

As for routers, we will not stop on them, since in this material the wireless connection is not considered.

However, it is worth noting that many modern models can be used as modems, so before in the device's web interface, by following any web browser, the router must be switched to the modem mode.

Issues of Internet configuration when using the Rostelecom operator services

Finally, as an example, consider how to configure the Internet through the Rostelecom cable, step by step.

In principle, the IPv4 protocol is not particularly different from all described, and may look like, as shown in the image above, but taking into account the input of addresses that are present in the service contract, and the activation of the IPv6 protocol. There should be no difficulties here.

Now briefly on how to configure the Internet through the Rostelecom cable in Windows 7 or any other system if the router is used and the PPPoE connection. Go to the web interface of the router (192.168.1.1), as a login and password, use Admin / Admin, specify PPPOE in the connection type, enter the login and password from the contract (not to be confused with the authorization of access to the router settings), and most importantly - in VPI / VCI parameters Set your region. At the end of operations, save the changes and restart the modem / router.

Possible troubleshooting and elimination

As for the possible communication setup errors, everything is impossible to foresee. But as the first measures, use the following techniques:

  • check the correctness of the IP address and gateway;
  • replace standard values \u200b\u200bfor DNS on Combinations from Google;
  • disable the use of proxy;
  • update the network card drivers (it is best to use automated programs like Driver Booster);
  • for a while, turn off the antivirus and firewall;
  • remove the existing connection and create it again.

If nothing helps, call the Windows troubleshooting tool and use the Situation Correction Tips. If it does not help, contact directly to the Internet service provider.

Today there are two types of Internet connection. The first type is a wired connection that is used to connect a cable called twisted pair. The second type is a Wi-Fi connection that provides an Internet connection due to radio waves. The Wi-Fi connection got widespread in our time. However, wired internet has several advantages relevant in large organizations and offices. At home, too, it makes sense to conduct a wired connection at least one computer. For a sustainable Internet connection and efficient operation, you must properly configure the parameters of its connection.

Advantages of wired Internet connection

Over the past 15 years, the Internet has rapidly introduced in all areas of our life. It is necessary in the banking sector, trade, production, as well as indispensable for the exchange of information and personal communication. The most common ways to connect to the global network today are a wired connection and Wi-Fi connection.

With a wired connection, an optical cable or twisted pair is used. The first type of cable has a significant advantage, as it provides the speed of information of up to 1 GB per second. In twisted pair, the limit speed reaches 100 MB per second.

The speed of information transmission through the cable depends on its type and from the network card that takes place. It affects the work of desktop computers, game consoles, televisions and other devices combined into one network. Streaming information does not require constant exchange between devices, which significantly increases the processing speed. The speed in the local connection between workstations is of great importance when working in a corporate network. It is taken into account if there is a need to quickly transfer a large number of information.

With Wi-Fi Connection, the Internet connection is carried out using radio waves operating in a specific range. Therefore, Wi-Fi is more in demand on the household level. It is convenient, as it allows you to immediately connect to the Internet from a smartphone, a tablet or a laptop anywhere where there is an access point. However, the reception of the signal is affected by the devices of neighbors operating in the frequency band of the Wi-Fi-compound, and items on the path of radio waves.

For a Wi-Fi connection, a cable laying is not needed, but it is strongly exposed to radio interference, and the further you are from the access point, the worse the reception of the signal

Wired connection has several advantages over wireless:

  • the speed of obtaining and sending information with a wired connection is approximately 2 times higher than that of Wi-Fi;
  • when sharing files with a server, the delay is minimal, which is important in online games requiring the maximum speed of action from the user;
  • wired connection is more resistant to interference in the network; It does not affect it the gadgets operating on the Wi-Fi frequency band or close to the sources of electromagnetic radiation;
  • the power of the signal with a wired connection does not depend on the obstacles to the path and exposure to external factors.

Errors arising when connecting a wired compound can be indicated by codes that indicate the cause of problems.

Video: The wiring Internet connection is better than Wi-Fi

How to connect a cable to a computer or laptop

Connect the Internet cable to the computer's network adapter connector independently even unprepared by the user. A standard cable (twisted pair) is used to connect with roasting RJ-45 connector at both ends of the cable.

Connect the cable as follows:

  1. Prepare the network cable required length.
  2. One connector Connect to any LAN-connector on the router.

    To begin with, connect the cable connector to any LAN-connector of the router

  3. Another cable connector is connected to a laptop or computer connector.

    Now you need to connect the second cable connector to the LAN-computer connector

  4. When using an old type modem, the incoming cable of the provider is connected to a yellow internet connector on the modem.

    In the modems of the old type, the provider cable should be attached to the tight color modem connector

  5. Connecting a LAN cable Connect to any Ethernet modem connector and a network connector of the device.

    Connecting cable from the device you need to connect to an Ethernet modem connector

  6. After connecting the computer with the router, the LED indicator lights up the installation between devices.

    When connecting to a computer on the router indicator panel, the indicator LED will burn

The cable connection does not represent much difficulty, since all connectors have connections that are suitable only to the corresponding sockets on the computer connector panel. Make an error in this process is extremely difficult even for a novice user.

Dynamic and static Internet connection

After connecting cable connectors and construct the connection between the computer's network adapter and the provider equipment, the Internet connection can be debugging. First of all, it is necessary to choose the method of connecting to the main network, pushing off from specific purposes. There are 2 ways to connect:

  • a dynamic connection is a method in which an individual IP address assigned to a computer is automatically configured and varies when transforming the initial parameters. The equipment of the provider's company independently assigns the values \u200b\u200bof the network address and the main gateway. During the connection of the computer to the main line, the connection to the global network occurs immediately, without requiring additional entry of the identification data from the user. The only inconvenience with such a connection is a possible representation of a remote connection to your address. In this case, you need to pre-join the main line directly, bypassing the router;
  • a static connection is a connection method when the individual IP address provided to the computer remains constant and designated at the conclusion of the contract with the provider. During such a connection, the user sets the address in manual mode, and also independently prescribes the values \u200b\u200bof the main gateway and DNS servers. If there are no such information in the contract, you can find them in the technical support department of the provider. Some Internet providers for licensing network may need to enter a username and password. This information is usually indicated in contractual documents or are determined by the subscriber on their own.

How to create a dynamic connection

To create a dynamic connection to create a series of consecutive actions:

  1. In the "Start" keys menu, go to the "Network Connections" section

  2. In the "Parameters" section in the "Changing Network Settings" block, select "Setting the adapter parameters".

    In "Parameters", go to the option "Setting the Adapter Settings"

  3. In the "Network Connections" console, right-click on an Ethernet connection.
  4. In the menu that opens, select "Properties".

    In the drop-down Ethernet menu, select "Properties"

  5. In the Connection Console, select the IP version 4 (TCP / IPv4) component and click "Properties".

    In the properties panel, it is necessary to highlight the IP version 4 string (TCP / IPv4), after which open the "properties"

  6. In the TCP / IPV4 protocol attribute console, activate the "Get IP Address automatically" switches and "Get the DNS server address automatically".

    In the last step, activate the "Get IP Address automatically" switches and "Get the DNS server address automatically"

  7. Click OK to complete.

Now the dynamic connection is ready for use.

How to create a static connection

To create a static connection, you must perform the following steps:

Everything, the static connection is established.

Currently, most subscribers of the home Internet applies a dynamic connection, as the main way is to connect through the router. Static connection is applied with a modem connection or with direct connection.

When using an ADSL modem connection, only static addresses apply to the Internet provider apply.

Video: Creating a static and dynamic connection

How to configure L2TP connection in Windows 10

The L2TP tunnel protocol used to connect to the global network is the symbiosis of the old PPTP protocols from Microsoft and L2F from Cisco. It is easily processed by network devices and has a high speed exchange rate due to a reduction in the load on the processor. It has great compound stability and high security. Creates to create tunnels to work in any networks. The L2TP protocol is usually used in corporate networks, as it allows you to create a network connection on top of the existing network. This ensures a steady connection between the main office of the organization and regional offices.

To configure the L2TP connection, you need to perform a series of consecutive actions:

  1. Right-click on the Start icon.
  2. In the menu that appears, click on the "Network Connections" string.

    In the Start menu, select the "Network Connections" string

  3. In the "Parameters" section, select "Network Management Center and Common Access".

    In the "Parameters" section, open the "Network and Common Access Control Center"

  4. Here, select the "Creating a New Connection or Network" option.

    In the "Network and Shared Access Control Center" section, you must select the first item - "Creating a new connection or network"

  5. In the "Connection or Network Setup" panel, highlight the "Connection to Workplace" string and click "Next".

    Highlight the "Connection to Workplace" string, then click "Next"

  6. In the "Connection to the Desktop" console, select the "Use My Internet Connection" tab (VPN) tab.

    Click on the "Use My Internet Connection (VPN" tab to continue setting

  7. In the opening console, enter the address of the server, check the box next to the "Allow this connection to other users" option and click Create.

    Enter the server address and do not forget to check the last item to allow you to connect to other users.

  8. In the operating console, enter the username and password, then connect to the main network.
  9. Go to "Network Connections".
  10. Right-click on the generated VPN connection.
  11. In the open menu, select "Properties".

    In the console, click on the generated VPN connection with the right mouse button and go to Properties

  12. In the Console tabs "VPN-connection: Properties", open the Safety parameter.
  13. In the VPN Type field, set the L2TP value from IPsec (L2TP / IPsec), and in the "Data Encryption" field, select "Optional". After that, open "Advanced Parameters".

    The VPN type must be set as L2TP with IPsec (L2TP / IPSec), to encrypt data to select "optional"

  14. Enter the key provided by the provider to authenticate.

    The key to authentication must be provided to you by the provider.

  15. Click OK to complete.

If you did everything correctly, the L2TP connection is ready for use.

Video: How to configure L2TP connection in Windows 10

The created L2TP connection enhances the security level for the subscriber and makes a simpler connection to the provider's equipment.

How to configure PPPOE connection in Windows 10

The PPPoE network connection protocol is used when connecting to the main network using Ethernet technology. This method has several advantages, such as an extended range of additional features, compressing information when transferring, carrying out authentication and encryption operations with information packages. Connection requires authorization on the network (input username and password). Used when directly connected to the main network and the equipment of the provider.

To connect to the Internet using the PPPoE protocol, you must perform a number of operations:

  1. Open the "Network and Shared Access Control Center".
  2. Here, select "Creating and Configuring a New Connection or Network".

    In the "Network and Shared Access Control Center" section, click on "Creating and Configuring a New Connection or Network"

  3. In the Console "Connection or Network" console, highlight the "Internet connection" item and click Next.

    Select the first item - "Internet connection" and click "Next" for further settings

  4. Select the High Speed \u200b\u200btab (with PPPOE) tab.

    In the "Connection to the Internet", select the connection "High Speed \u200b\u200b(With PPPoE)"

  5. Next, enter the login and password received from the provider and click "Connect".

    Enter the login and password received from the provider, and click "Connect" to complete the setting

You now have a PPPoE connection.

Video: How to connect and configure PPPoE connection

To give permission to other users to use the connection is only when installing the home Internet, since the number of users is limited.

Wire Internet Connection Problems

When connecting a wired Internet, errors associated with equipment fails, a cliff of the main network or incorrect user actions occur. In most cases, the connection problems occur due to careless actions of the user itself.. To determine and eliminate the cause of the problem, you need to perform simple actions according to the following algorithm:

  1. Run the "Network and Common Access Control Center".
  2. In the "Network Connections" tab, select Troubleshooting.

    Go to the "Network and Shared Access Center" and open the Troubleshooting section.

  3. Select "Internet connections".

    For further settings, select the "Internet connection" option

  4. Next, click on the "Run troubleshooting tool" string.

    Wait for problem detection process

  5. After the process is completed in the window that appears, select the "Troubleshooting Connection Tools" tab.

    Select "Troubleshooting Internet Connection Troubleshooting" and expect to complete the diagnostic process

  6. At the end of the problem search process, close the console, if the malfunctions are not detected. If malfunctions are detected, follow further instructions in pop-up windows.

    7. Run the troubleshooting agent by clicking on the appropriate line

  7. After the verification process is completed in the Inbox Console, select "Find this computer on the network" and click "Next".

    Mark the item "Find this computer on the network" and continue troubleshooting using the "Next" button

  8. The troubleshooting tool will check if the firewall does not block this computer on the network.

    Expect the end of the network gateway configuration check

  9. During the troubleshooting process, follow the instructions that appear on the console.
  10. If problems are not detected, close the console.
  11. If problems are detected, then for their elimination, follow the instructions of the program.

On this, the check of incoming connections is completed.

The instruction shows the detection of one incoming connection problem. You can see more details with the problem by clicking on the "View Additional Information" string.


The presented method for finding connection errors is classic and developed by Microsoft Corporation. In reality, everything is much easier, since the problem with connecting the Internet can be caused by other reasons that are eliminated by a mechanical manner.

This algorithm helps to eliminate the problem with the lack of an Internet connection in most cases:

  1. Restart the computer.
  2. Disconnect the router from the network and wait 10-15 seconds.
  3. Turn on the router.
  4. If the connection is not restored, press the RESET button to restart the router.

To avoid problems with connecting to the Internet, it is recommended to periodically turn off the router from the network and give it time to restore.

Video: Entry when connecting wired internet

Currently, all Internet providers prefer to establish a dynamic connection to the main network. This is more convenient for the network subscriber and the provider's company, since it does not require reconfiguration of the parameters with any changes in the network equipment. If you plan to often use remote access to your computer, it is definitely better to choose a direct connection, bypassing the router or modem. For home Internet, you can always change the router settings and the connection type set by initially specialists by the provider. In the future, when changing the system configuration or complete reinstallation, the network parameters are set automatically. With direct configuration, you will need to set in manual mode. All this must be taken into account users when choosing a type of Internet connection.

How to set up the internet at home? The answer to this question depends on the type of channel proposed by your provider. Therefore, we will look at three ways to configure the connection to the global network:

  • direct option using a dedicated line;
  • ADSL connection with a router;
  • wireless connection.

This method will work if your provider offered you a cable connection via an Ethernet channel. After entering these lines to the house you must do the following:

  1. Connect your computer or laptop to the channel by inserting the RJ-45 plug to the LAN-port of the network card.

  2. Press the button in the lower left corner of the "Start" screen and go to the control menu.

  3. On the menu page, find the section "Network and Internet".

  4. On the next page, open the Access Settings Management section.

  5. On the "Center" page, open a bookmark with the Connection Process Settings.

  6. Select on the "Create" page section with the expected name, confirming the choice of the "Next" button.

  7. On the next page, select the type of connection "High Speed \u200b\u200b(with PPPoE)".

  8. Next, you can enter the login and password received from the provider and password to network access, after which you can click on the "Connect" button.

  9. For the controlled activation of the connection, you will have to return to the "Network and Internet" section (paragraph 3 of this list) and go to the "Changing Adapter Settings" tab.

  10. On the listing page you need to click twice the "High Speed \u200b\u200bConnection" icon and wait for the connection with the provider's modem.

On a note! For user convenience, you can create a "high-speed connection" icon shortcut and transfer it to the desktop. To do this, click on the right mouse button icon and select the "Create Label" section.

This method of configuring the Internet connection is good for its simplicity and the ability to control the connection process with the global network. In addition, in the case of direct connection, the user does not buy additional equipment.

Important! However, the user will have to activate the "High Speed \u200b\u200bConnection" label after each power on or laptop is turned on. That is, the Internet itself will not appear. For this you need a special device -

The process of configuring the connection using the router, we will consider below the text.

Video - How to set up wired Internet on Windows 10

How to connect to the ADSL channel

In this case, the user can connect to the global network using a telephone line, without paying the channel input to the house (if it is connected to the urban network). To work with an ADSL channel, a special device is needed - a modem, and for the organization of round-the-clock access to the network, you need a router with a built-in ADSL modem.

Router (router, switch, hub, hub) - a network device that provides a continuous exchange of data packets within the network. The router allows you to connect several users (or devices) to the provider channel, and "distributes" the Internet is it, so the user can enable its computer and go to the network using a browser, without manipulation with labels and bookmarks.

Configuring an Internet connection using an ADSL router requires the following actions:

  1. Put a special device on the telephone line - splitter, which provides connecting to such a channel and an ADSL router, and a telephone.

  2. Extend the line from the port "Modem" of Splitter to the "ADSL" modem connector using a two-core cable with RJ-11 sockets.

  3. Connect the LAN port of the router with the appropriate desktop or laptop connector using a cable with RJ-45 sockets.

  4. Enable your computer and router. Wait until the panel of the network device (after a series of short blinks) ADSL indicator.

  5. Press the "Start" button to select the "Command Line" section and enter the ipconfig command in it.

  6. In the Find a string window indicating the IP address of the main gateway (router address).

  7. Open any browser and enter the IP addresses of the main gateway in the address bar (in most cases it is 192.168.0.1).

  8. The access window will open to the administrative panel of the router, to activate which you want to enter the username and password of the administrator (they are recorded in the instructions that can be found in the box).

  9. In the login and password opened after entering the menu, you need to find the "WAN" section and click on the Add button.

  10. On the open page you need to select the connection type (traditionally is PPPoE) and enter the username and password that are received from your provider.

  11. At the end, it is necessary to find in the router menu of the Configuration Saving and exit the mode with the preservation of changes.

After actions made for connecting to the Internet, a router will respond, which can operate in 24/7 mode, providing access to the network for the user's first user. Moreover, besides the ADSL router, there are both Ethernet devices that will work when connecting to a dedicated line.

However, the setup algorithm described above involves the organization of only wired compound. To start a wireless network, you need a router with Wi-Fi technology support.

Video - How to configure Internet connection (PPPOE) for Windows 10

How to configure wireless internet connection

To organize a home wireless network, we will need an ADSL- or Ethernet router (the first connects to the telephone line, the second to the selected channel) with a Wi-Fi module on board.

Wi-Fi is the technology of wireless exchange of packages with data between the router connected to the provider channel and the client (laptop, computer, telephone, tablet).

The primary (WAN) process of these devices is described above in the text, so then we will only consider the activation of the Wi-Fi channel and the construction of the wireless network on its database. To do this, you need to do the following:


After that, you can use the router not only for wired, but also for wireless connection to the network. Because of this, you can save on your mobile Internet and organize a workplace at any point of living space.

Video - How to connect and configure Wi-Fi in Windows 10 laptop

A laptop for a long time ago from a convenient and luxurious electronic device turned into an indispensable tool for work and entertainment. Despite the fact that desktop PCs and laptops are increasingly recently replaced by tablet computers and smartphones, to the end they will not be displaced for the simple reason that the possibilities and capacity of laptops will still be inaccessible for mobile computer devices. But the laptop without the Internet is like a car without gasoline: and beautiful, and useful, but it does not fulfill its functions. Therefore, there is a fair question about how to connect a laptop to the Internet. The process is simple. There are several options that allow you to connect the laptop to the Internet. Consider them below.

How to connect a laptop to the Internet using Wi-Fi technology

This is the most convenient and relatively fast way to exchange data on the Internet. All that is needed for this is the availability of a Wi-Fi network. If you are at home, it is convenient to use a Wi-Fi router. So, being in the Wi-Fi network zone, you need to enable your wireless communication module (all modern laptops and netbooks come with a built-in module), then you should open the "Control Panel", select the "Network and Shared Access Control Center" "In the window that opens, click on the left mouse button on the inscription" Connect to the network ". In the list that opens, select the wireless network you are interested in and click "Connection". If the network is encrypted, you will need to enter a password that you can specify by the owner or administrator of this Wi-Fi network.

How to connect a laptop to the Internet using a USB modem

More convenient, but less high-speed option, you can call a way to connect to the Internet via a USB 3G-modem. Such devices were created based on the technology first applied in mobile phones. Accordingly, the maximum data transfer rate with such a modem also does not exceed the speed of the mobile Internet. In principle, this is a mobile Internet, but in a laptop, in the form of a small USB modema, in size not exceeding a conventional flash drive. By the way, in shape it also very much resembles a flash drive. Usually, the developers of a mobile modem integrate all drivers and installation files of the required programs directly into the device, so, as a rule, you will only get it to stick it into the USB port of your laptop, wait a while and click the "Connect" button in the window that opens. Without forgetting, naturally, to pre-replenish the bill. As a result, you can be online anywhere in which there is a coating of your mobile operator.

How to connect a laptop to the Internet via Ethernet cable

This is the highest speed and least convenient way to access the Internet. The least comfortable, because he completely kills or strongly limits the main advantage of the laptop - his mobility, so it is more suitable for stationary PCs, but since it began to consider options, we will do it to the end. So, here everything will depend only on the provider you have chosen and the method of connection provided to them. In any case, at first you will need to plug the Ethernet cable into a special connector on the side of the case of your laptop. And further - several options (depending on the provider). Perhaps this will be enough, and you will immediately be able to enter the Internet. You may need to register a specific IP address and other settings of your network card or even create a special VPN connection in which you will register with your login and password specified by your provider. Each time after turning on the laptop, do not forget to start this connection.

So, here you have learned how to connect a laptop to the Internet with all possible ways, and now you can use your device with maximum efficiency.