Thinking through the design of a home space, it is important to pay attention to even seemingly insignificant details, such as door handles. Indeed, the whole perception of the interior as a whole is built on such details, moreover, door handles are often purchased for a long period of time, which means that their choice must be approached more than responsibly. If you are an ardent lover of everything non-standard, then you will like this review, because today we will show the most unusual door handles designed to decorate not only the door itself, but the entire interior of the house as a whole.

Did you know that the Italians were the first to come up with a door handle with a tongue, having developed its mechanism in such a way that when the handle was pressed, the tongue was hidden, but when released it was shown.

According to statistics, door handles are the most inconspicuous details in the interior, and if they are noticed, they are immediately forgotten, but this statement applies only to ordinary nondescript handles, and the original door handles are a kind of anchor for which the human eye clings. Due to its non-standard appearance, such door fittings are striking, which means they are impressive and memorable.

But this door hardware also has a downside, because an improperly selected handle can ruin the entire design of the room as a whole, and now it turns from inconspicuous into tasteless and catchy. Under improperly selected fittings is meant a discrepancy between its color and the rest of the range of the room, as well as stylistic overtones. So, for example, in a baroque interior decorated in black and gold, a modest straight silver handle will look inappropriate; gilded fittings with carving or forging elements are more suitable here.

Unusual door handles, photo.













Manufacturing process of decorative door handles:

The choice of such necessary door fittings should proceed from the general style of the premises, from the hobbies of the owners, as well as their general emotional mood. So, for example, people with a great sense of humor can buy pens in the form of a clown's head, a gun or an outstretched hand, animal lovers can pay attention to accessories in the form of cats, mice, dogs or frogs. Adventure lovers can look for handles in the form of ships, scrolls, hourglasses or the globe. Connoisseurs of ethnic interiors will be interested in fittings in the form of an elephant's head, a jaguar's body, a bamboo trunk, etc.

Unusual door handles will help to profitably beat the interior idea, bring fresh notes to the design of the room, and the interior or entrance door will turn from a very mediocre one into a bright and memorable one.

The website "Dekorol" offers its readers to subscribe to receive news, the subscription form is in the sidebar.

We will make this wooden handle for the door to the bathhouse from a piece of board 26 cm long, 10 cm wide and 5 cm thick. It was 26 cm long and 10 cm wide that turned out to be a handle for the door to the bathhouse, which I drew on a sheet of paper in a cage. I wanted to draw some unusual, rounded handle. To do this, I took a round plate and a round cup of the sizes I needed. That's what I did.

Now he transferred the drawing to the board and sawed along the contour with an electric jigsaw. I used a saw for metal and the mode that is used when sawing metal. In this case, an even and clean cut is obtained. The sawn-out handle for the door to the bathhouse can be rounded off by removing the chamfers, you can apply a carved pattern to the surface of the handle, you can apply a pattern by burning as in the recent past, remember that there used to be such devices, the contours were outlined with a red-hot wire nozzle. A groove remained, and these grooves formed a pattern. It is best to fasten a wooden handle with screws. And further. it is best to use hardwood for the manufacture of the handle for the door to the bath, there will be no resin on the hands. From deciduous - the linden has a very soft, easy-to-work wood. I would recommend birch. Here's a strong handle. Remember at least butts for handguns - everything is like one made of birch! And I don't think it's a coincidence!

Well, now, as always, according to the good tradition of illustrations for the article:

View of the wooden door to the bath. Homemade pen in place.

Here is such a necessary, original, and essentially free wooden handle for the door to the bathhouse.

I have been searching the Internet for drawings, diagrams or drawings of home-made "fountain pens" for a long time and, frankly speaking, I did not find anything sensible, but they all write as one that this dofiga is on the network ... I want to say that there are photos of devices, but there are no clear diagrams with dimensions. Of course, I waved a little before everything worked out and here I am posting pictures of my smoothbore

in general, one handle is made (in the figure, the one on top) under the Flaubert cartridge, which can be freely bought in any department of pneumatics.

the barrel is made of bronze (suitable for a weak Flaubert - it won’t break), the rest of the details are steel. Of course, everything can be cut out of bronze except for the striker.

but the second one (the one below) for the standard cartridge 0.22LR "small" (5.6 mm) - this device is more dangerous.
all parts except the barrel are machined from steel, the barrel itself is made of stainless steel.

well, someone will say that this is a type of bullshit, that it doesn’t shoot or it will break in your hands ...

I immediately say that I tested and shot 6 rounds quite successfully. and as for the return, then it is present. and it was once again that the trigger latch gave a good blow on the finger during the return, but these are trifles in comparison with my joy

here are the test pics.
I decided to compare my ammunition: a copy of Makarov, Safari-3″ and the pen itself.

I took 2-2.5mm tin and shot a little ... (on the right photo is the rear side of the piece of iron)
As you can see from the photos:
with a pneumatic gun you can shoot at pigeons;
Flaubert's Safari is a little better, good for shooting rats, well, or scaring off some kind of gopnik;
The fountain pen performed at its best.

when he fired from the handle, a wooden block was placed under a sheet of iron. the bullet pierced the steel and entered 2 cm into the wood.

I had to get it out with pliers, making an effort ...

now for those who are going to experiment with such devices, I warn you that this is a criminal offense, both wearing and manufacturing (up to 5 years) ... so think before you do it.

Well, here is the long-awaited drawing of my pen. Who has advice on improvement, I will only be happy to unsubscribe.

Handle-bracket for wooden windows and doors (wooden, round, chiseled)Price 92.00

The Makmart company brings to your attention a wide choice of furniture handles of the Crystal bu 004 series.

160. Handles brackets for doors 09 bracket modern classics, black 160 mm.

Italian quality tonka is elegant.

Door handles for a bath in Russia

The showroom in Italy has long been. Moscow, st.

Nakhimovsky prospect e-estimate. ru estimate portal, inflation smr indices, construction, budgeting, estimate. Spare parts catalog for Indesit refrigerators are inexpensive in Kazan, Kirov, Samara, Moscow, Perm, Krasnodar, these are kitchens.

Refrigerator handle Indesit, shelves. The Secret manufacturing company was founded in 2001. Trading House 21 Vek to buy furniture fittings and components in bulk during the work was mastered.

Glass door of a shower cabin or fencing under the order from the manufacturer at a profitable wholesale and retail warehouse store with more than 10,000 items of assortment.

seven retailers. - door - in the online store "World of Castles" in Moscow. We offer the cost of input metal company oldor-m will satisfy any wallet.

Pull handle 96mm rs081ab ; Laminated chipboard Lime 999/11 Tsh 3500*1750*16 (D) Oak Atlanta White scope furniture business. active more than 15 years successful on. Handle-bracket for wooden windows and doors (wooden, round, turned) brass elite pull handles matte gold antique old.

Ask a Question. In our online store, interior door handles, from Italy Often the decoration of your kitchen is a refrigerator, and especially its handles, the design of which, if you have any questions, our specialist will contact you and.

Internet shop Furniture fittings | Mfk Samara Buy for the company is engaged in wholesale and retail sales of materials for the production of hull.

Entrance metal doors with a latch, lock round foreign wholesale retail sale of laminated chipboard, plywood, accessories of the best manufacturers in Russia and the world. Exhibition samples of doors with a discount of up to 50%! rubankov shop contacts. Handle-bracket for wooden windows and doors (wooden, round, turned) We offer you to get acquainted with the prices of ready-made economy class kitchens, as its individual elements. St. Petersburg store addresses scheme.

Handles. Nakhimov joinery woodworking tool.

various types of planers spare parts for. bu 004

You watched

Heat-resistant aerosol enamel (up to +650°C) KUDO silver (5001), 0.52l
Enamel PF-266 Lacra golden brown, 3kg
Incandescent lamp 150W E27 (Standard)
Terminal block 12-pair 1.5-6.0 mm2 NAVIGATOR
Diesel gun NEOCLIMA NPD 30
Blades, 18x100x0.5 mm 10pcs/pack Kinwehr
Flat chisel 20×250mm SDS+, BOSCH
Solvent 646, 10l (TU)
Masonry mix Praktik M100, 30 kg
Drill 14-615mm SDS+ (550mm), BOSCH
Primer Paleta betonkontakt, 12 kg
Plug TV (Mom)
Pliers with 2-component handle MATRIX 160 mm
Cable channel white 25×16 2 meters
Cable channel white 16×16 2 meters
Mounting foam Tytan O2 Lexy 60 household, all season, 750ml
Hydraulic level D8mm L10m
Folding handle for cellar zinc

Cutting a spoon from a stick

It turns out that cutting a spoon is not so difficult. At least according to the description. 🙂

There is an incredible amount of sizes, shapes and styles of spoons. Miniature wooden spoons are reminiscent of old salt spoons.

Round wooden handles (24)

Of course, the size of the spoon is directly related to the size of the wooden blank. You may want to make a tiny spoon for mustard or spices, or a large ladle for a camping pot. The spoon, the manufacture of which is mentioned here, has the most ordinary small size. You could say it's a yogurt spoon.

Materials you will need:

  • straight-fiber wood blank;
  • sharp knife;
  • sandpaper;
  • polyurethane or other transparent varnish of your choice;
  • pen or marker;
  • cutter.

Take a piece of wood without knots, slightly longer than the intended length of the spoon.

A birch branch has a diameter of a 25 cent coin (or 2 rubles).

Cut one side of the branch along its entire length, using long, strong strokes away from you. This side will be the back of the spoon. For some, it is more convenient to use movements “on themselves”.

Slightly deepening the crop, make it flat. Outline the main shape of the spoon on the top of the handle, leaving the end of the scoop branch thick.

Form a handle.

When making a groove, always cut towards the center of the branch. If you cut away from the center, there is a chance that you will cut too much, more than you wanted.

Continue to gradually form the handle.

Now shape the scoop by cutting along the marked lines.

Sand the product with sandpaper.

At this point, you have a spoon without a notch.

Draw the perimeter of the recess of the future spoon.

With the sharp tip of a small blade, carefully make an indentation within the boundaries of the drawn line. You can cut either "on yourself" or "away from you". I think you will have to use both techniques. The main thing is that it is easy for you to control the movements and stay inside the circle line.

Be very careful not to accidentally slip off the blade and step over the markings.

After making several U-shaped cuts, deepen the scoop as far as possible. Naturally, the scoop should not get too thin walls.

Cut out the sanding tool by cutting off the tip of the branch so that it fits into the recess in the branch.

Wrap the cut branch with a small piece of sandpaper and sand the inside of the scoop.

You can also grind the scoop with a piece of sandpaper, holding it in your hand.

Of course, if you have a cutter, you can speed up the grinding process somewhat. But, of course, that grinding by hand brings more satisfaction.

The handle for opening the door was invented a long time ago. Its occurrence is associated with the installation of a doorway in the room. Similar elements were simply superimposed on the existing canvas. Gradually they fell out of use, they were replaced by more modern versions, representing samples of mortise structures.

As a result of changing the latch mechanism, the external indicators of the door began to look more advantageous. In addition, the convenience of such a device should be highlighted. How to make a doorknob? To answer this question, you can study the material below.

Taking into account the manufacturing process of this component, it is worth highlighting the fact that the handles for entrance doors are a more complex base compared to interior options. They are more impressive in size and require the possession of locksmith skills.

The whole difficulty of such work lies in the fact that if installed incorrectly, within the framework of the slightest inaccuracies, the structure can warp and jam. For this reason, installation work should be entrusted only to specialists.

Modern manufacturers make handles of any configuration, color and from different materials. A device for closing interior doors may have a latch, a lock with a simple mechanism, or a fixing part. Almost all samples have standard landing dimensions. Mounting such options is not particularly difficult.

Handle assembly: features

How to make a pen? Many consumers want the element delivered once to serve for a long time and not bring inconvenience and breakdowns. If, nevertheless, such a nuisance happened, the structure should be disassembled and carefully examined. There will be a body, a device for turning, a retaining ring, a twist spring, a key washer. All broken parts must be replaced.

Intact elements should be reinstalled and tightened thoroughly with a screwdriver. Next, the finished handle is installed in the door body.

Preparatory activities

On the eve of installation work, you should take care of the availability of certain devices. Then the work will be organized, planned and efficient. Putting this element in its place is not difficult at all, it is important to familiarize yourself with the basic installation rule.

In order for the event to go quickly, it is important to prepare the following tools:

  • drill;
  • chisel;
  • drill feather type 22 mm;
  • crown for wood 50 mm.

It will be difficult to do without this set of devices.

Door handle installation

Once a suitable handle option has been selected, it can be put in place. To do this, first measure the distance from the bottom of the door to the border, equal to 90-100 cm. These indicators should vary based on the convenience of the owner. The main indicators will be the anthropometric indicators of the residents, their height.

Marking is done with a square. It is also necessary to sharpen the pencil well. They draw a clear line, and along it, applying a square, a distance of 60 mm is measured. The point is fixed with an awl. Then you can make marks on the opposite side of the door. Similar measurements are taken from the back of the door.

Usually in the set, overlay templates are attached to the handles. Their absence gives grounds for their independent production. On the end part is the middle and a hole is made for the tongue of the lock.

This opening should correspond to 5 cm, the perpendicularity of the base should be clearly maintained. The latch is applied to the door, the tongue should be shown above the end part. You should mark the place for drilling the hole for the handle and make a recess of 6-7 cm. It will connect with the recess for the lock tongue.

This part of the structure is pushed into the opening intended for it, and a point is fixed for the front plate of the snap-in device. This place is machined with a chisel 2 mm deep. The same recess is constructed at the place where the door frame is attached.

The door handle, according to the instructions, is disassembled. First, a latch is fixed on the door. Then the base of the handle is placed and fastened to the door array with screws. To assemble this door element, you must follow the reverse order. Put in place, it must have a strong base and rotate without difficulty. The latch should freely enter and exit the grooves.

The presence of even minor problems gives grounds for examining the installed structure: the evenness of the definition of the locking elements, the degree of tightening of the fasteners.

Door handles for interior doors

The main materials used for the manufacture of such elements will be aluminum, brass, stainless steel, silumin. Brass is the most common choice. Any door handle has a coating, you can select nickel and chrome with a matte finish.

As a decoration, not only metal is suitable, but also natural woods, glass treated with chemical components. Handles made of precious metals look especially luxurious and pompous. Of course, their cost will be high. These samples are made to order.

There are situations in which a handle is made on the door installed between the rooms, designed for the front door. This choice is not accidental: the elements of such a plan are distinguished by a longer warranty period. When installing the handle on the door, it is important to focus on ease of use and the presence of a return spring. It contributes to the fact that the device independently returns it to its original place.

Making wooden handles

On the main part of modern doors you can see metal fittings. Wood handles are a thing of the past. However, such an element of the door leaf can be made on its own.

To do this, stock up on a pencil, which makes markings on a piece of wood. Typically, such elements have an arcuate, slightly rounded configuration, at the ends they have flat plates. They are designed for a mounting base attached to the web. They can contain decorative elements. To do this, you can successfully apply a special putty for wood, consisting of sawdust and PVA glue. Its cost is low.

To begin with, a wooden blank is being prepared, on which the silhouette of the future pen is applied with a pencil.

The product is cut along the contour. After that, the base is ground with an emery cloth, then polished. Often, to give the object a beautiful shade, varnish is processed, the color of which matches the tone of the door. The dried handle is fixed on the door with small screws.

Bath door handle

The bath seems to be an unusual and original room, which is decorated in a peculiar way. Traditionally, this type of building has a wooden base. The same goes for door handles. After all, products of this nature are completely safe in terms of stability and constancy of the material.

Wood is unable to heat up strongly at high temperatures, and it is not possible to burn yourself on it. For this room, hardwood materials are best suited. They do not emit resins, respectively, the hands will not stick. So, linden as a base is very malleable, plastic, and easy to process. Such a handle will be very pleasant to the touch, warm.

Considering wooden handles, it is important to note the ease of their manufacture, external beauty and originality. They can last indefinitely and are even better than the individual options available on the market.

For the manufacture of such samples, a lathe, a block of wood and special-purpose glue are needed. As a natural species, it is best to choose birch.

On the eve of the carpentry work, you should consider the appearance of the presented product. The edges of such handles must be even and smooth and have a width of 20 mm. They fit into the handle holes.

Making a door handle on a lathe is not difficult at all. To do this, the workpiece is carefully turned, unnecessary elements are removed from it. As soon as the base is completely ready, it is necessary to process the edges with an emery cloth. Next, holders are made in the calculation of 2 pieces per handle. Once they have been processed, they are sawn from the wood and separated. Through holes are made in them, designed for fasteners. The handle is glued to the holders.

The finished product can be coated with a special compound or varnish, or you can leave it like that. Also on the surface it is quite possible to apply a carved pattern, burning with a special device.

All products of such a plan loosen over time, open and close with difficulty. Modern handles are held on by screws. It happens that it is enough to tighten them so that the structure acquires its former properties. To do this, use a screwdriver.

First, the latch is removed. To do this, take a narrow screwdriver. This part suits her. The screws must be tightened very carefully to avoid breakage of the door handle. The door opens slightly and is clamped on both sides with screws. Next, the fittings are well held, and the fixing screws are firmly screwed in. The handle, together with the body, is inserted into place.

Wire weaving was especially popular in Soviet times: then people, bracelets, rings, caskets, baskets, key chains, flowers were made from multi-colored flexible twigs. Today, any decoration and useful thing in everyday life can be bought, but it is much more pleasant. do it yourself and, for example, to give mom. Or surprise your peers with an original bauble made of beads and wire. Beginning needlewomen and needlewomen will benefit from an article from the old magazine "Family and School" about how how to weave wire. Here you will find schemes and methods of weaving from wire, get interesting ideas for creativity.

Material: pieces of telephone cable with insulation of various colors, and thicker wire that will be needed to make frames.

Tools: wire cutters, pliers, hammer and awl.

To make templates you will need: cardboard, paper (thick), ruler and compass.

Schemes and methods of weaving from wire

The first and second figures show different ways of weaving two, three or more pieces of wire. Weaving in the form of a braid (Figure 1, I a, b, c, d, e) . They take a piece of wire, bend it, fasten the second wire to the first one at the bend. For convenience, the upper part is fixed with a nail to the board and weaved, as indicated in the figure. You can make a rope out of two wires. Having connected two pieces, twist them to the right or to the left. Two "strings", twisted in different directions and put together, form a Christmas tree.

Wicker "path" (Figure 1, II a, b) . Taking a wire 1.5 mm thick, bend one end of it, and weave it with thinner wires at the bend until the width necessary for your track is formed. Having finished the first row, the end of the first piece of wire is bent, passing it between the ends of the entire braid, like the movement of a shuttle in a loom, and weaving of the second row begins. Having finished the second row, the end of the first piece is again bent and passed between the ends of the braid, but from the opposite side. In this order, weave the track to the desired size.

Braided round belt (Figure 1, III a, b, c, d, e, f, g, i, j) . The figure shows in sequential order the weaving of a girdle from the four ends of the wire.

When weaving, you need to remember that each row ends with threading the last end into the loop formed when the initial one is bent. A new row can be started from either end, but the last one must be threaded into the loop of the first, thus completing the weaving of the row.

The belt is woven from any number of wires. Figure 2 shows the weaving of two belts around the rod (front view and side view). The rod is made up of several wires laid in a row close to each other.

The first end of the wire is wound behind the rod and forms a loop on the side of the rod, and the second end of this wire, encircling the rod from the front side, is threaded into the loop formed and wound up behind the rod. Then the rod is encircled with the first end of the wire from the front side and threaded into the loop of the second end, and so, performing row after row, you can get a belt of any length.

The second exercise is slightly different from the first, the sequence of its implementation is shown in the figure.

Ideas: what interesting things can be woven from wire

Round wire stand:

On a board of small thickness, carnations without hats are driven in in a circle at the same distance. Then, with two pieces of wire 1.5 mm thick, the studs are braided around in opposite directions. The third piece of wire is placed radially between the nails, fastening the outer braid. The center is tied with a thin wire. The resulting frame is braided with a fourth, thinner piece of wire. Weaving on the frame starts from the center. Having fixed the end of the wire, weaving is carried out in a circle, alternately bending around from one side, then from the other, radially located threads.

Wire basket:

The frame is assembled from an even number of pieces of wire - 6, 8, 10 or more, depending on the size of the basket. First, a ring of the correct shape is bent, and then two risers, a bottom and a handle are made from one piece and fastened to the ring. Further, the rest of the risers and the base for the bottom are bent out of four pieces. Having bent the upper ends, they are hung on the ring, tightly secured with pliers.

First of all, weave the bottom. Having fixed the end of the wire in the center, several weaves are made in a circle, similar to the weaving of the stand, and then they switch to the weaving of the radial threads that form the bottom. In the same way, the risers of the sides are braided.

With this method of weaving, gaps remain between horizontally running threads. The base of the handle is braided with a thin wire, tightly fitting the spiral rings to each other.

Wire shopping bag:

For work, you will need a thick cardboard, equal in size to the intended bag. Points for the holes for attaching the handles and the frame of the bag are marked on it with a pencil. Holes are pierced in the designated places with an awl and two metal or wooden rings for handles are made. The finished handles are placed on the cardboard (at the attachment points on both sides) and fastened to the cardboard with a thin cord or wire, as shown in the figure.

In the manufacture of the frame, the wire threads are passed through the holes and thrown onto the rings of the handles. Then, in one of the ways, they start weaving from the bottom up. After the sides of the bag are ready, the cardboard is removed. For winding handles use a thin wire.

DIY colored wire flowers:

Figure 6 shows how to make flowers from spirals.

The flowers are collected in a bouquet and the "stems" are wrapped with thin wire, the ends are divided into separate bundles (8 - 10), which serve as a frame for weaving the base of the vase. The weaving method is the same as for the sides of the basket (see Figure 4).

Dog and deer:

The body and head of a deer are woven in the form of a round belt (see Figure 1).

The front legs are woven into the body and pass into the neck, made by the method of spiral winding. The doggy consists of a frame braided with a coil.

How to bend and join wire

Many different items can be made from wire - from the simplest hook to the most complex patterns. Suitable copper, iron, steel, aluminum wire and telephone cable with a different color coating. The wire is stored wound in circles. Of the tools you need: a hammer, a small vise, a file, pliers, wire cutters, pliers, pliers, round nose pliers, metalwork scissors, a soldering iron.

The wire is straightened by pulling it between two wooden blocks or by pulling it tightly around a round metal rod (door handle). Steel wire or thin bar metal is best straightened on a hard surface with a hammer or mallet. Small parts are bent with pliers or round nose pliers. Large and hard - bend in a vice.

Iron and copper thin wire is cut with wire cutters and pliers. Steel - in the place of the cut, it is preheated over a fire. Strip or sheet metal is first marked out, and then slightly incised at the marking points and chopped with strong blows.
Separate pieces of wire and other metal parts are connected by bending or soldering. In the first case, several turns are made, pulling the wire onto the rod. Before soldering, the surface of the parts is thoroughly cleaned with a file or sandpaper from dirt and rust. The wire is soldered by folding the two ends together, after twisting them for strength. A thin wire can be soldered using a paste - tinol, which is applied in a thin layer to the place of soldering and heated over a fire.

To learn how to do things from wire well and cleanly, you must first make some simple details:

  • Spiral spring. A wire 1-1.5 mm thick is wound on a round wooden dagger of a cylindrical or conical shape (Figure 1, a).
  • Rings and half rings. The spiral-spring is cut lengthwise (Figure 1, b).
  • Flower. Six half rings are soldered to the ring (Figure 1, c).
  • Gear. Six half rings are soldered together [Figure 1, d).
  • Spiral. They take the end of the wire with round-nose pliers and twist it around by rotating the hand in a circle (Figure 1, e).
  • Openwork of three spirals (Figure 1, f).
  • Openwork leaf. On a blank of a conical shape, 4 - 5 rings are made (wire thickness - 0.5 - 1 mm). The resulting rings are shaped as shown in Figure 1, g, and soldered at the base.
  • The shamrock is bent from one wire with pliers (Figure 1, h).
  • Wave (Figure 1, i).

Star and ornamental stripe. On a board of small thickness, mark out the drawing and drive in nails without hats:

net:

Flower girl. A bracket with a spiral termination is bent from a two-millimeter wire. Separately, the ring is rolled up and fastened by intercepting the sides. At the top, the spirals are connected by three turns of wire (Figure 4).

Furniture. It is made from one and a half to two millimeter wire. Its parts are fastened together with coils. Thin-layer plywood or cardboard can serve as a seat and table top. For fastening in plywood, small holes are made with an awl (Figure 5).

Puzzle. It is necessary to separate its parts so as not to bend the wire anywhere and not to compress it (Figure 6).

Horse. From two pieces of wire 2.5 - 3 mm thick, the legs and two lower spirals are bent. From the third piece make the head, neck and upper spiral. From the fourth - a mane, turning on the back into coils fastening pieces of wire. The mane is soldered in several places (Figure 8).

Heron. It is made from one piece of wire (section - 3 mm) with spiral rings for a decorative vase (Figure 9).

I. Lyamin, Family and School magazine, 1971

Wooden door handles for rooms for various purposes are quite expensive. The high price is due to the use of manual labor and originality of performance. The design itself is not particularly difficult, and you can do it yourself. The article indicates the advantages and disadvantages of wood models, as well as describes various technologies for creating door fittings with one's own hand.

Features of wooden door handles

Since ancient times, door fittings have been made of wood. Later, they were worthy competition from metal products and elements made of modern materials. However, even today, wooden models are widely popular due to their advantages:

  1. Qualitatively sanded and treated wood - pleasant to the touch. A wood handle is not as cold as a metal or plastic handle.
  2. Wood fittings are indispensable in the arrangement of baths and saunas. Wooden elements do not heat up to high temperatures, like metal ones, and the likelihood of getting burned on contact with the handle is reduced to zero.
  3. The ease of making wooden door handles with your own hands. Wood is easy to process, and working with it does not require expensive equipment. Using bars, slats or log cabins, you can create a structure of any shape.
  4. Affordable cost.

Despite the significant advantages, wooden products have some disadvantages:

  1. The strength characteristics of wood are inferior to metal elements. This fact must be taken into account when erecting a structure that is subjected to significant loads. In this case, it is better to give preference to hard wood or metal.
  2. With prolonged contact with metal surfaces, the tree is destroyed. Therefore, it is desirable to select door handles for doors in accordance with the material of manufacture of the leaf.
  3. In order for a wood handle to serve for a long time, it should be carefully processed: sanded and impregnated with protective compounds.

The choice of wood for the manufacture of the handle

Accessories mounted on the entrance doors must be made of strong wood species. Some experts recommend the use of conifers, which, when heated, emit a pleasant and beneficial aroma for human health. However, hardwood species, which are distinguished by an elegant texture pattern and good mechanical resistance, are no less in demand.

Advice. Door handles are best made from deciduous trees so that no resin remains on the hands when gripping.

For the manufacture of handles on the door with your own hands fit:

  1. Oak - characterized by strength, resistance to external influences and hardness. Oak products look respectable and noble, great for arranging country cottages and apartments.
  2. Beech is a valuable breed, similar in many qualities to oak. The wood has an unusual pinkish hue of a uniform texture.
  3. Poplar - has pronounced bactericidal properties, due to which it is often used in the design of a steam room.
  4. Linden - has an anti-inflammatory and soothing effect on the human body.

How to make a door handle with your own hands: a carved model

Tools and materials

Creating a carved model of a door handle involves the use of the following materials and tools:

  • wooden flat blank;
  • a branch of an unusual shape;
  • saw and electric jigsaw;
  • cutter and nozzles;
  • drill;
  • sandpaper or grinder;
  • clamp;
  • epoxy adhesive;
  • pins;

Manufacturing and installation

The sequence of creating a door handle:


A simple version of a wooden handle for a bath

A homemade door handle will surprise the guests of the bath and become the pride of the owners of the steam room. Building a simple model is not difficult. Consider an example of creating a handle 26 cm long and 10 cm high. To work, you need a board with dimensions of 26 * 10 * 5 cm, a simple pencil and a jigsaw.

Action algorithm:


Door handle in Russian folk style

A copy of the carved handle will harmoniously fit into the interior, designed in the traditional folk style. The handle will beautifully complement the door, stylized antique. The design of the model includes 6 elements:

  • base;
  • intermediate bars - 2 pcs.;
  • cubes - 2 pcs.;
  • lever.

First you need to prepare each part separately, fit them together and grind them. Production order:


Turned wooden handle for a door with your own hands

To make a turned handle for interior doors, you will have to master the skills of working on a lathe. Creating such a model requires the use of the following tools and materials:

  • machine with a three-jaw chuck;
  • oak bar;
  • wood cutters;
  • coarse and medium-grained sandpaper;
  • wax mastic.

Sequencing:

  1. Prepare the workpiece. Cut off a square bar a little along the edges on one side. Thus, the rounded part will be evenly fixed in the machine chuck.
  2. Insert the workpiece into the cams and, using a semicircular cutter, give it a cylindrical shape along its entire length.
  3. Align the surface of the bar with the end of the cutter, holding it at a slight inclination.
  4. With the sharp edge of the cutter, shape the upper part of the handle.
  5. Step back some distance from the edge and carve out the base, the back of which will be adjacent to the door leaf.
  6. Trim the base of the handle with a straight cutter, and sand the surface. When sanding, it is important not to overdo it and not press too hard on the paper, otherwise you can burn your fingers on the rotating elements and ruin the product.
  7. Cover the handle with wax mastic. The agent penetrates into the pores of the wood, protecting the material from external influences and giving the handle a matte sheen.
  8. With the tip of the cutter, cut off the handle from the rest of the raw timber.
  9. Insert the handle into the door.

In the manufacturing process, some nuances should be taken into account:

  • for processing, it is necessary to take material without cracks and knots, otherwise, during rotation, the workpiece may crack and cause injury;
  • it is advisable to make several handles from one workpiece at once, since the turned models are small in size;
  • before grinding and impregnating with a protective compound, all minor cracks on the handle must be filled with putty intended for woodworking.

Installing handles on interior doors

Inserting handles into interior doors with your own hands begins with marking the location of the fittings. According to established standards, a standard door handle is mounted at a height of 80-100 cm from the floor (depending on the height of the residents). Work is performed in the following sequence:

  1. Mark the installation location on the door leaf, stepping back from the edge of at least 6 cm.
  2. Putting a ruler, draw a straight line through the end side of the door and continue marking from the back of the canvas.
  3. Drill to prepare a hole ½ the thickness of the door.
  4. Repeat drilling on the other side of the blade. It is important that there is no deviation of the axis of the hole horizontally or vertically.
  5. With a chisel, knock out a niche for mounting the latch mechanism.
  6. Insert the latch and check that its edge is in the same plane with the door leaf.
  7. Bring the two parts of the handle from different sides of the door and pass through the hole with guides. Tighten the structure with bolts.
  8. Finish the end of the box with a metal plate - prepare a sample for the tongue and frame, try on and fix the plate with screws.

Over time, minor repairs of interior door handles with your own hands may be required. Sometimes, so that the elements do not loosen, it is enough to tighten the screws with a screwdriver.

DIY wooden door handles: photo ideas

The design of the door handles strikes with a variety of colors and designs. The fantasies of woodworking masters are embodied in bizarre shapes, graceful curves and stylistic performance of door accessories.