Not sure what to do with your child? We offer a selection of great ideas for crafts with children from plastic bottles. These are very simple master classes that even preschoolers and children of elementary school age will master. You just need to help them a little.

Earlier we already told you what toys, pots and even ottomans can be made from plastic bottles. This time we will focus on simpler, but no less interesting crafts that a child can make with minimal help. The main thing is that the very process of creating toys and accessories will be interesting. That is, children will enjoy not only the result, but also the work itself.

All materials in the master classes will be simple. So stock up on bottles of lemonade or mineral water and get down to business! Pre-wash each plastic bottle outside and inside, freeing them from labels. Then dry them well. You can start!

Airplane

Boys will especially love this simple craft made from a plastic bottle and colored paper. Little fans of war games can easily make such a plane with their own hands.

Additionally, we need to take PVA glue, cardboard, cutter or knife.

In this case, a small bottle was used, but you can take a 2 liter one. Wrap the entire body with colored paper. If it is too thin, then it will not adhere to the plastic bottle beautifully - it will wrinkle. In this case, it would be wiser to use double-sided tape.

We make the wings from cardboard. It is better to make them from one single piece. Just make two cuts on the sides of the plastic bottle and secure it through the entire body.

We also make the propeller and tail of the aircraft from cardboard: we hook the latter with glue. Do not forget about the decoration in the form of stars or the name of the fighter. The child can draw it himself.

By the way, this plane can shoot. You just have to dig a hole in the cork and fill the plastic bottle with water. You will see that the child will really like this craft. Now the real battle can be played out!

Turtles

This turtle made from the bottom of plastic bottles is suitable for crafts with children of kindergarten age. Make them together with your child - he will definitely like it.

You need to cut off the bottom of a bottle of lemonade or mineral water. Cut out the silhouette of a turtle from foamiran or soft foam. We draw a face with a pen or a marker - this may well be done by a child.

The bottom of the plastic bottle should be slightly smaller than the center. In the center we will mark the button and sew on the "carapace" on all sides with bright threads.

The turtle can be easily disassembled and assembled back - you can store something tasty in it or put multi-colored beads here. It will be interesting for children to make such a toy with their own hands.

Toy bucket

If your child loves to play constructors or kinders, then you can motivate him to clean up little things with the help of a beautiful craft from a plastic bottle. Of course, children will not be able to do it on their own, but together you will definitely cope with it.

It is best to choose a five liter bottle. The neck must be cut off from it. Ask your child to choose the fabric he likes. Or you can choose a beautiful braid together.

It is best to glue the edging with superglue (you can use a glue gun). Just tie the bright laces on the sides.

A child can paste over this basket with clippings of his favorite characters or ready-made stickers. This part of working with a plastic bottle is completely at his disposal. If he falls in love with his bucket, he will definitely put little things in it.

Boat or raft

This craft made from bottles and a simple pallet will appeal to both boys and girls. Let the child choose the basis, and you will help him to fasten all the parts together.

It is most convenient to take two identical 0.5 liter bottles. If you are making a raft with toys on top, you will need a plastic Ouija board (usually used for packing vegetables or herbs). You also need to take a rubberized wire. Punch four holes around the edges and then tie the bottles at the bottom. This lightweight raft will be reliable enough.

To ride a boat out of plastic Barbie bottles, you will need to make two holes with your own hands using sharp scissors. Place them slightly below the center section. To prevent the bottle from scratching, lightly melt the edges with a lighter (keep the fire at least 1-1.5 cm away from the surface). Secure the two bottles together with colored tape or duct tape at the top and bottom.

Children like to play with such boats even in the bathroom. But you can launch a bottle raft in a stream, pool or even in a river!

Papier mache

The papier-mâché technique can also be used for children's crafts made from plastic bottles. It seems that this is not easy, but in reality it is not at all so.

We need to take PVA glue or paste. We also need colored paper and additional decor. Pour the glue onto any plastic surface. We randomly tear the paper into small pieces (no more than 4 × 4 cm). We do not need even figures, so let the child do it with his own hands.

We take each piece and immerse it in the glue - then we place it on the bottle. When the first layer is laid out, let it dry. Then we repeat. This should be done 4-5 times.

By the way, if you feel sorry for spending so much colored paper, you can easily replace the first layers with regular newspapers.

What animal or toy does your child want to make out of a plastic bottle? If you need legs, make them out of corks and glue them. Need thorns or wings? Cardboard will help you.

If your craft is not made of colored paper, but made of plain paper, paint it additionally. You can cover the product with ornamental varnish. Let your child draw small details on their own. This toy will last a long time.

Money box

Making such a toy out of a plastic bottle, cardboard and several pieces of fabric is as easy as shelling pears - the child can handle it himself.

The piggy bank can be made in the form of any animal. In this case, a piglet is selected.

The bottle must be cut into two parts and the excess part cut off from it. You can remove 5 or more centimeters. Fasten the two pieces together with colored, wide tape. If this is not the case, you can simply sew them with beautiful bright threads.

To make the bottle stand, we will use corks. They can be simply glued onto superglue. If you don't have that many traffic jams, plasticine will do. In this case, you just need to attach the plastic bottle from four sides to cardboard or any other unnecessary base.

We will make the ears of our animal out of cardboard and cute scraps. Glue them together, cut two small holes on the bottle and push in deeper.

It remains only to draw a face for the craft using a permanent marker, nail polish, acrylic paint or something else. There is nothing? Craft with paper and glue.

We fill the piggy bank through the spout - we just unscrew the cork from the bottle.

Binoculars

This craft will appeal to children of school and preschool age. You can make it out of plastic bottles and colored tape in just 5 minutes. But how much pleasure from the game!

We take two identical bottles of not too large diameter. The most important thing is that when connecting to each other, the gap between the necks is not very large - it should be convenient for the child to look at them.

We glue the bottles with thin colored tape. So that they do not fidget over each other, you can additionally glue the common side edge with superglue (a few drops are enough).

We wrap the necks with a beautiful tape and fasten them firmly. We will leave the tape so that it is convenient for the child to carry homemade binoculars from bottles around his neck.

Boys and girls like this simple craft very much. Spend 5 minutes for a fun game - the child will be happy.

We hope you enjoyed our selection of ideas, and you are ready to make these fun crafts with your own hands. As you can see, there is nothing complicated about this, and all the materials are cheap and probably already at your fingertips. Supplement these master classes with something of your own, invite your child to do crafts and get down to business with pleasure!

Views: 2 652

From an ordinary plastic bottle, you can form products that are useful in playing with children, household, home interior. From unpretentious material, you can prepare a craft for kindergarten. Children can independently cope with elementary manufacturing schemes with little or no help from adults. In addition to plastic bottles, you may need a glue gun, paints and scissors.

To make any craft from a plastic bottle, you need to prepare the necessary tools and materials:

  • plastic bottles are the main material;
  • scissors, blade and clerical knife - used for cutting;
  • acrylic paints - useful for decorative finishes;
  • brushes of various thicknesses for painting;
  • candle for burning sharp cuts;
  • glue gun for joining parts;
  • construction stapler to attach other elements to the base.

Additional materials are selected depending on the complexity and decorative finish.

DIY ottoman from plastic bottles

A craft from a plastic bottle for home improvement is the best option for price and quality. Diversified furniture can be made from raw materials, in particular an ottoman.

You will need the following tools and materials:

  • 38 plastic bottles of the same volume and shape;
  • a roll of wide stationery tape;
  • plywood sheet;
  • jigsaw, scissors, stationery knife;
  • rolled synthetic winterizer;
  • construction stapler;
  • measuring tape and pencil;
  • dense fabric for upholstery.

DIY craft from plastic bottles: step by step making a round ottoman

Algorithm for creating a ottoman:

  • Arrange the bottles so that they resemble a honeycomb in shape. In the 1st row there are 4 elements; in the 2nd - 5; in the 3rd - 6; in the next - 7. The remaining 3 rows are displayed according to the principle of 1st, 2nd and 3rd.
  • Wrap tightly with stationery tape. You need to make several layers and wind it from the top of the bottles to the very bottom in a spiral - you get the basis of the future ottoman.
  • Measure the diameter of the resulting honeycomb. On plywood, sketch a circle with the resulting diameter. Make 2 such details. It is advisable to try on circles so that they match the parameters of the base shape.
DIY craft from plastic bottles: step by step making a square ottoman
  • Using a construction stapler, nail the plywood circles on the top and bottom of the pouf base.
  • Wrap the sides with padding polyester. Cover the circles with soft material too. Fix the soft base with a construction stapler.
  • Take measurements from the resulting blank and make patterns from textiles. Sew a cover, which is then put on the body of the pouf.

Furniture of this type can be made in a few hours, it looks presentable, and the costs are minimal.

Flowers from plastic bottles

There are many options for creating flowers from plastic bottles.

The easiest way to create a voluminous flower:

  • Cut off the bottom of the bottle so that the height of the resulting object corresponds to 5-6 cm.
  • Divide the circle into 5 equal parts with a marker. The markings are made so that each part includes the bulge of the bottom. Cut the plastic to the very bottom of the bottom at each of the marks.
  • To form attractive petals, you need to round each resulting strip.
  • Process the edges of the slices by dusting over a candle flame.

Make a hole in the center of the bottom using a heated nail, awl or soldering iron. Pass a dense wire through it, which will become the stem of a plastic flower.

Toys from plastic bottles

A craft made from a plastic bottle can become a sturdy, interesting and budgetary toy for a child of almost any age.

Several options for toys:

Apple-casket Octopus Piggy bank
Cut off the bottoms of two identical bottles. The height of each element must be the same and be more than 6 cm.

In the center of one of the parts, make a hole with a heated nail.

Cut a strip from the canvas of a green bottle, twist it into a tube - you get a stalk. Cut a leaf from the same strip.

Glue a leaf to the handle, thread a tube through the hole in the bottom. Everything is fixed with a glue gun.

If you insert one bottom into the other, you get a full-fledged apple in which you can store small things.

 Cut the bottle in half. Measure a distance of 5-8 cm from the cut. Divide the circle into parts, the thickness of each should be 1-2 cm.

When cutting the plastic along the marks, stripes are obtained. Tighten the elements with a scissor blade.

Make eyes out of the caps. Draw the pupils with a marker, and then attach the blanks with a glue gun to the body of the octopus.

Make a hole in the bottom, thread a thread through it. You will get a toy analogue "Yo-Yo".

 Pick up a bottle with a wide bottom. Using a marker, draw nostrils on the cap, eyes on the bottle itself.

Cut a narrow rectangular hole at the base of the housing.

Make stable support legs from the covers, attaching the elements with a glue gun.

Cut ears out of thick cardboard and glue to the base.

You can make any toy out of bottles by creating a mock-up of the product:

  • Zhukov;
  • fruits;
  • vegetables;
  • transport;
  • dolls;
  • figurines.

House made of plastic bottles

From plastic bottles, you can create a house that will be a refuge for children in the yard, the basis of a sandbox.

You need to make blanks:

  • more than 500 tons of bottles of the same volume and shape;
  • timber and plywood;
  • nails, wire, construction stapler;
  • sharp knife, nails;
  • 4 hemp;
  • tools for making measurements and markings.

Construction algorithm:

  1. Make the body of the future house from a bar. Wooden bases are knocked down in such a way that frames are formed - the bases of future walls. Shoot down 2 more frames, which will become roof slopes. Place the body on the hemp-legs. Lay plywood underneath.
  2. Determine the diameter of the container. Mark the upper and lower beams in accordance with the obtained parameter. Drive a nail in the center of each strip.
  3. Cut off the neck of each bottle so as to remove the narrowing points of the element. A hole in the center of each bottom with a hot awl.
  4. String so many blanks on a wire cut so that they form a full-fledged strip from the upper bar to the lower body. In the process of forming a strip of a wall, you need to make sure that all parts sit tightly relative to each other.
  5. Fasten one end of the wire to a nail driven into the top bar. Stretch the metal base like a string and fasten the bottom wooden base to the nail. Make as many strips as possible to make a wall.
  6. To strengthen the walls, you can knock the bottles together with a construction stapler.

The roof is made according to the same principle. The overlap can also be made flat using the wall manufacturing algorithm. By changing the direction of the "strings" on which the containers are strung, windows can be made.

Plastic bottle doll

A craft made from a plastic bottle can be a completely functional doll that you can play.

List of tools and materials:

  • plain fabric in pastel color;
  • synthetic winterizer;
  • 2 buttons;
  • Knitting;
  • printed fabric;
  • needle with thread;
  • marker;
  • bottle;
  • glue gun.

Manufacturing technique:

  • Head shaping. Cut a circle out of plain fabric. Sew along the edge with a small line seam. Pull the workpiece a little, fill it with padding polyester. Tighten the thread completely and secure the seam. Sew on the buttons-eyes, draw a nose and lips with a marker.
  • Neck making. Cut a wide strip from the same textile. Sew the cut on one side, pulling the textiles slightly. Attach the element to the seam of the head and sew on the pattern. You get a kind of skirt at the bottom of the head.
  • Hairstyle creation. Cut the knitting thread into equal pieces. Thread each part through a needle. Make a stitch on the doll's "head". Pull out the needle and tie the thread 2 knots. It turns out just 2 hairs. After repeating the manipulations with the help of scissors, trim the hairstyle.

  • Hand making. Cut 2 strips out of pastel fabric. Sew each strip, forming a tube. Fill the space with padding polyester, sew up the edges.
  • The torso. Cut off the bottom of the bottle. Treat the area near the neck with a glue gun. Set the head on top, and lay the skirt-neck along the adhesive part. Using a glue gun, attach your hands to the base of the container.
  • Take measurements from the container and sew a sundress or dress for the doll. Put clothes on the doll. You can fix the element with glue.

You can make a more complex doll model using other auxiliary materials.

Do-it-yourself bird from plastic bottles

It is easy to make a parrot or an owl from a plastic container, since the silhouette and manufacturing principle are identical.

Preparation:

  • 2 identical containers;
  • several multi-colored bottles;
  • scissors or clerical knife;
  • glue gun;
  • 2 caps and a marker.

Manufacturing algorithm:

  1. Make a base from the same containers. Cut out the middle part from one container and connect the cuts to each other, cut off the bottom from the second before expanding. Using a glue gun, connect the bottoms to each other. You will get a kind of hourglass.
  2. Cut out the middle parts from the rest of the containers. With a marker, draw the number of ovals that will fit on the canvas.
  3. use a glue gun to attach the ovals to the base. It is necessary to do so that each next element breaks up 1/3 of the lower one. The resulting feathers are layered.

Ovals fit in a specific pattern. When making an owl, eye circles are first formed, then the rest of the head is filled in. In a parrot, feathers are distributed evenly throughout the body - from top to bottom. Eyes are made from the caps.

Flower bed from a plastic bottle

A two-tier flower bed made of plastic bottles is neat, compact and at the same time capacious.

Manufacturing technique:

  1. Prepare a place for a flower bed, determine the parameters and shape of the product.
  2. Dig a small groove that will become the outline of the flower bed fence.
  3. Fill the containers with sand or earth, tighten the lids.
  4. Bury the filled container in the groove. Submerge containers in the ground a little more than half. Bury with the neck down.
  5. Having formed the lower tier of the flower bed, you need to fill the inside with earth. To prevent the bottles from spreading out under the action of the soil, you can pull them together with a wire. Tamp the earth.
  6. Thanks to measurements and calculations, determine the center of the flower bed and make another one of the same fence, but of a smaller size. Cover with earth and tamp.

The flower bed is ready for planting. Additionally, the structure can be strengthened with natural stone, brick, tiles.

Birdhouse from a plastic bottle

For the manufacture of a birdhouse, it is better to take a 5-liter plastic bottle. Additionally, you need to prepare scissors and a glue gun.

Manufacturing features:

  1. Cut off the bottom.
  2. Remove half of the bottle base.
  3. At the base of the neck (parallel to it), with the help of folds, form the silhouette of a house with a gable roof. You can bend the plastic using scissors.
  4. Bend the rest of the bottle according to the layout.
  5. Attach the model to the cut bottom and cut out a shape from it. Glue to the house with a glue gun.

You will get a full-fledged house, the "entrance" to which is through a wide neck.

Bird feeder from a plastic bottle

A craft made from a plastic bottle can be a bird feeder.

Simple manufacturing option:

  1. Pick up a bottle in the form of a keg with a volume of 1.5-2 liters.
  2. Cut out large arched windows at the base of the container. Better to make 4 openings.
  3. Burn 4 holes at the same level in the neck area. Thread a wire or thread - you get fastenings.

Grain is poured into the bottom, through the windows the birds can get into the trough.

Palm from plastic bottles

To create a plastic palm tree, you need to collect more than 100 brown and 100 green bottles, prepare a construction stapler.

Manufacturing technique:

  1. Cut the bottom of each brown container. Form 5 rounded petals 5-7 cm long from the container linen.
  2. Sticking the bottle neck into the bottle with the petals up, fix each element with a construction stapler.
  3. The neck and bottom are cut off from green containers. Bend the cylinder in half along the heights. Cut the element along the fold. Use scissors to make a terry along the long sides of the rectangle, cutting the edges into thin strips.
  4. Put the green part on half of the other and fix it with a stapler. Leaves are obtained.

At the end, the crown and trunk of the palm tree are assembled. You need to connect the parts tightly - it is advisable to use wire. In order for the barrel to stand, you need to thread the blank with a metal pin.

Crafts from plastic bottles for preschoolers

A preschool child can make a toy or craft out of plastic bottles, which is important for all kinds of contests in kindergarten.

It is worth choosing simple options and schemes of work so that the child can do everything at once, and help from adults is minimized.

chamomile

Pick up containers from yogurt or milk. It is desirable that the lid is orange, and the container itself is white. Cut the bottle in half. Divide the base of the upper part of the bottle into 8-10 equal parts.

Cut into strips to the very neck. Round off the edges and twist slightly with a scissor blade. Bend each petal to the bottom. Screw on the lid.

Make a hole in the center of the twist by burning the base with a hot nail. Thread the wire - get the stem. Cut leaves from green plastic and glue to the metal base with glue.

Penguin

Take 2 identical curly bottles. Cut one in half - leave the part with the bottom. Cut off the larger half from the second, leaving only the lower part. Connect the blanks, holding them together with glue.

Paint over the form with black paint, the bottom with any other. Use white paint to paint the base for the front part. Shape the muzzle. Glue a thread pom-pom to the colored bottom. At the transition point, tie a ribbon that will act as a scarf.

Crocodile

2 green containers will come in handy. From the first, cut off only the bottom and the solid part of the neck. Glue the edges of the smaller cut. Cut off the dense part of the bottom and top from the second container. At the point of narrowing, cut off half the bottle lengthwise.

Cut 20 triangles out of white paper. Make eyes out of colored paper, fix on the base. Glue the elements along the cut. Connect the bottles together. At the bottom of the form, glue 4 covers - these are paws.

Bees

Paint a small bottle with yellow, form black stripes along the entire "body" of the bee. Glue decorative eyes on the lid. You can draw with a marker. Cut out a medium-sized oval (wings) from a transparent or brown bottle.

Attach the manufactured parts to the base of the container. Make legs from narrow strips cut from the same container as the wings. Make a hole between the wings through which you can thread a thread - such a detail will allow you to hang the insect.

Butterflies

Cut out the soft part from the plastic container, forming the canvas in the form of a rectangle. In accordance with the size of the base, choose a butterfly stencil. Apply a plastic base to the stencil, fix the components at 4 points with clothespins or stationery clamps. Draw a marker around the contours, transferring the drawing to the plastic.

Place the sketch on the board and cut out the shape with a utility knife along the contour. Additionally, you can cut out some parts of the wing pattern. You can paint the product along the marked lines with nail polish. To add shine, you can use sequins, beads and rhinestones.

Hedgehogs

Prepare 20-25 brown plastic containers. A transparent base is also suitable, which will then have to be painted over. Cut all parts in half. Create a fringe by cutting the strips to a tight spot in the neck area.

Assembly is in progress - insert bottles into each other. Draw the eyes of the animal on the first container. The plug represents the nose of the animal. On the "needles" you can put an apple made from bottles.

Helicopter

Choose a ball for table tennis and a container, the diameter of which will be the same as that of a sports equipment. Additionally, you will need cocktail straws, glue, scissors, and a safety pin.

Procedure:

  1. Cut off the bottom of the container, leaving the neck screwed up with a lid. It is enough to use a part with a length of 5-8 cm.
  2. Make a cross from straws and fasten with a safety pin. Attach to the cut of the bottle.
  3. Cut a strip from the container around the circumference, divide it in half.
  4. Glue a piece of straw to a narrow strip along the edges. Use the part of the fixture that has a fold.
  5. Glue the part to the bottom of the helicopter body - on the other side relative to the blades.
  6. Insert a tennis ball into the cut hole of the container.

Glue the tail on the lid, which is made from cocktail straws. This part of the helicopter can be modeled after a real aircraft.

Matryoshka

The matryoshka is made using two techniques - working with plastic containers and papier-mâché. Choose the most curly container. On the surface, glue pieces of white paper that are dipped in PVA glue.

Cut off a stiff throat. The hole is repaired according to the same principle as the base of the bottle. When the base is dry, smooth the surface with a damp brush. Draw the blank according to the matryoshka sketch. You can use gouache or acrylic paints for this purpose.

Fly agarics

Prepare 2 containers - with a capacity of 2 liters and 0.5 liters. Cut off the bottom from a larger one, paint over with red paint. Make white dots. Treat a smaller container with white paint. Cut a rectangle out of paper, form a fringe on one side.

Stick to the middle of the white bottle. Fix the "cap" of the fly agaric on the white leg. You can make an additional fly agaric in a smaller size and glue it to a larger element.

Household supplies from plastic bottles

From a plastic bottle, you can make not only jewelry or children's toys, but also functional products that are relevant in everyday life.

Options for things:

  • Flowerpots for indoor and garden flowers. Cut the container in half, give the base its original shape and paint.

  • Country washbasin. Cut off the bottom. Fix the container upside down. With a slight slackening of the lid, water begins to pour out.
  • 10 identical containers can be used to make a broom for outdoor cleaning. Cut off the lower parts. Fold each piece in half lengthwise and create a fringe. Thread the elements by connecting them with wire.

  • The containers cut in half can make the ideal seedling caps for your vegetable garden. If you remove the covers, the cover will be additionally ventilated.
  • If you cut off 1/3 of the top of the bottle, you get a wonderful container for storing pencils, crayons and other little things.

  • Plastic containers can be the basis for weaving a variety of baskets that can be used on the farm.
  • If there is a zipper between the two parts of the cut container, then you get an original organizer for storing cotton wool, bandages.
  • Cut off the bottoms from several containers, string the parts through the center of the element onto a metal rod. Spread the bowls evenly along the rod. You will get a stand for jewelry.

  • Cut the bottle in half. Cut a square at the base. Such a device becomes a pocket for the phone, which is put on the base of the charger, and the phone is placed in the bowl.

You can decorate the craft by using paints, rhinestones, beads, glass stones, beads, ribbons. The elements can be attached to a plastic bottle using a construction stapler or a glue gun.

Article formatting: Natalie Podolskaya

Video about plastic crafts

DIY craft from a plastic bottle - video instructions for making:

In everyday life, there are many things that can be great materials for creativity. If you have accumulated unused plastic bottles, don't rush to throw them away. With their help, you can create amazingly beautiful things that will become a wonderful element of home decor, decoration of a summer cottage or yard. Crafts from plastic bottles with your own hands will help you have a fun time, especially small children will like this activity. See further master classes with photos, which will step by step show the creation of such original things.

Step-by-step instructions for making crafts from plastic bottles

It's amazing how many items you can create using regular plastic bottles. Together with your child, you can make fairy-tale characters - Cheburashka, Crocodile Gena, Winnie the Pooh, Piglet, Princess Frog. Figures of birds look original - storks, wood grouses, pigeons, swans. Crafts of pets and wild animals, such as a cat, a dog, a parrot, a penguin, a donkey, a squirrel, a pig, look great.

You can arrange these things in the kitchen or in the nursery, decorate the yard on the street. For home decoration, not only decorative, but also functional crafts can be used. For example, a beautiful plastic vase will be useful for storing bouquets - dry or alive, and it will be possible to plant indoor plants in the original pot. For a summer cottage, you can make figurines of animals and plants, cars, rockets, and the bottle lake will surprise guests at home and become a true work of art. How to make a craft from plastic bottles with your own hands, read on.

Original palm tree for summer cottages

Plastic bottles are an unusual and budget option that will help summer residents decorate their plots. The original exterior will definitely be appreciated by loved ones who come to visit and neighbors. A stylish tall palm tree looks beautiful, for which you need ordinary brown and green containers. What materials are needed to make a southern tree:

  • bottles (brown, green);
  • a metal sheet;
  • cable (take high voltage, 12-14 mm);
  • scissors;
  • rods (not less than 25 cm), tubes (2 cm in diameter) and bushings (metal).

How to do:

  1. Remove labels from bottles. Take the green ones, start making the leaves: for this, cut them in half with scissors. Cut thin strips along the surface (to the point of narrowing of the container). String the finished leaves onto the cable. For one tree, you need seven such elements.
  2. For the barrel, take brown bottles and cut them lengthwise into six pieces to create wide stripes. Also string on the cable.
  3. How to make a base: weld rods to a sheet of metal at different angles. Put the tubes on them. Attach the sleeves to the end of the rod so that you can thread the green containers through them.
  4. Assemble the trunk on a rod: for this, put on, with the neck down, brown blanks on top of each other. Pull the cable through the grommets, securing the leaves on top.
  5. After assembly, bury the structure in the ground, but no more than half a meter.

How to make an original palm tree, see the video:

Beautiful baby elephant from plastic bottles for kindergarten

A child who goes to kindergarten enjoys the environment: beautiful places for games, new toys. Crafts made with plastic bottles can be a wonderful decoration for the interior of a garden or street. If you want to surprise your little ones, make a beautiful baby elephant. What materials will be needed to create an interesting decoration:

  • two bottles (six liter);
  • two-liter containers (six pieces);
  • half-meter corrugated pipe (with a small diameter);
  • acrylic paints of gray (or blue), white, black, red shades;
  • thick wire fifty-five cm;
  • sand;
  • glue for plastic;
  • scissors.

How to do:

  1. Cut the 2 liter bottles in half, the bottoms will be the elephant's legs.
  2. Make the ears out of a 6-gallon material. In the second large container, cut holes to secure them.
  3. Bend the wire - this will be the shape of the trunk. Put the pipe on it.
  4. Paint all elements with gray or blue. Connect by gluing the legs to the body (before that, having filled in some sand there), the hose - to the opening of a large bottle that serves as the body of an elephant. Insert your ears into the holes.
  5. Paint the eyes with black and white paint, and the mouth with red acrylic.

How to make a swan to decorate a playground

A beautiful swan will be a wonderful decoration for a playground or your own summer cottage. This bird, for the manufacture of which plastic bottles are used, looks beautiful and original. Children will definitely like this figurine, which serves as a decorative element. What materials will be needed to create a beautiful white swan:

  • one bottle of five liters;
  • rigid wire hose;
  • milk bottles;
  • marker;
  • candle;
  • wire;
  • scissors;
  • dye.

How to do:

  1. Mark the cut lines on the large bottle. Carefully remove the top part, but leave the neck - this is the body of the bird.
  2. Insert a hose with wire through the throat - this is the swan's neck.
  3. Cut off the bottoms and necks of the milk plastic pieces. Cut the feathers out of them. Decorate their edges with a fringe. Lightly burn with a candle. Collect two feathers with a wire. Glue to the torso.
  4. Cut off the bottom of small bottles, put on the hose, shaping the neck. The swan head will come from the top of the white container. Make holes in it and the hose on both sides, fasten with wire material. Close the cover.
  5. Take the chemical cap. Cut in half. Insert the cap into the lid. Stick to your head.
  6. Paint the beak, paint the eyes.

Master class on making a Christmas tree for the new year

A Christmas tree is a tree that is traditionally bought before a big holiday. But if there are many green plastic bottles left at home, there is nothing difficult in making a budget and original version yourself. In addition, the needles do not fall off such a tree and it can stand for a long time. What materials will be needed for making wood:

  • six bottles (two-liter);
  • scissors;
  • wooden base (half a meter);
  • paint, brush;
  • plasticine;
  • pot.

How to make:

  1. Cut the bottom off the bottles. Cut the top along eight strips, forming sharp corners with scissors. Do it carefully.
  2. Scissors over the petal so that it folds over.
  3. Fix the base in a pot on plasticine. Put bottle blanks on it. Use scissors to cut off any excess plastic from the top petals to shape the tree.
  4. Paint the tree green.

Planter cat from a plastic bottle for indoor plants

A beautiful vase-cat will be an excellent decoration for a room interior. You can use this item to store various little things or plant beautiful plants there. Cacti, ivy, succulents look good in such a pots. Small children will like making this original cat. What tools are needed to create an interesting piece of jewelry:

  • bottle one and a half or half a liter;
  • acrylic white paint;
  • markers;
  • scissors.

How to make:

  1. Cut off the bottom third of the container. Shape the ears by removing the excess.
  2. Paint over with acrylic paint outside and inside.
  3. Draw the cat's eyes, ears, and mouth using the template.
  4. Plant your favorite plant in a pot. If you want, hang the planter by cutting symmetrical holes on all four sides.

How to make a peacock with your own hands

The beautiful peacock is a bird that symbolizes happiness, fulfillment of desires and nobility. Such a figurine, placed in a summer cottage, will bring good luck to its owner. The peacock requires painstaking and serious work, so it will take a lot of free time to make it. What materials are used to create a wonderful bird:

  • many plastic bottles of different colors and sizes;
  • stand;
  • synthetic foam;
  • glue gun;
  • abrasive mesh;
  • colored paper;
  • scissors.

How to create a craft:

  1. Remove the necks, the bottom from the bottles. Cut out many feathers of different sizes from the main part of the containers - from small to huge. Trim the edges with a fringe.
  2. Sort the blanks by size.
  3. Make a bird figurine using styrofoam. Attach to the stand.
  4. Cut out the beak (use the red bottle).
  5. Decorate the bird's chest with small multi-colored plastic parts. Glue the foam over gradually as you get closer to the tail, using larger feathers.
  6. Alternate colors to make the peacock look vibrant.
  7. For the tufted, make a few plastic strips with a fringe at the end.
  8. Use small, oval, round pieces of plastic to shape the bird's head. Make the eyes out of a brown bottle.
  9. Cut out the abrasive mesh in the shape of the wings. Attach feathers to it - move from small to large.
  10. Make the tail using the mesh too.
  11. Add paper details to the ends of the feathers: cut out circles in different colors and sizes. First stick a large oval, a smaller one on it, and place a very small element inside.
  12. Connect all parts with glue.

Watch the video for more details:

Children will absolutely love the creation of a beautiful craft - butterflies. An easy master class will help you create an original figurine even for the smallest. The craft can serve as an element of interior decoration or as part of a picture. You can make many different shapes of butterflies to decorate your nursery. What materials will be needed for this master class:

  • paints;
  • marker;
  • plastic bottle;
  • scissors.

How to make a craft:

  1. Cut the cylinder out of the flat part of the bottle. Cut in half.
  2. Draw a butterfly on the resulting convex plate.
  3. Cut it out.
  4. Fold the wings back to their natural shape.
  5. Color as desired.

For more details on creating crafts, see the video:

Decorative flowers

Decorative flowers will be a wonderful decoration for your home. You can create sunflowers, daisies, roses, and other plants. An easy master class with photos will help you easily make an original piece of jewelry. Decorate boxes, baskets, shelves with it or make an unusual picture. What elements are needed to make an original craft:

  • bottle;
  • lighter;
  • scissors;
  • marker.

How to create a craft:

  1. Draw flowers on the surface of the plastic container with a marker. Cut out.
  2. Bend the petals so that they point to one side. Cauterize them for a nice shape.
  3. Make a few pieces. Connect them, placing them on top of each other, with glue, wire, heating. Decorate the middle with beads or a plastic flower.

Bright flower beds for the garden and vegetable garden

A flowerbed for which plastic containers are used is simple to create. This material will help you make a budget and beautiful decoration for garden plants, fencing them off from the lawn. The craft will not take much time, and the result will delight you with its originality and beauty. What materials will be needed to make a simple flower bed for garden plants:

  • many plastic containers (plain or colored);
  • paint (if desired);
  • sand / earth.

How to do:

  1. Empty the bottles.
  2. Fill them with sand or earth (half or half).
  3. Create a fence around the flower bed by digging containers securely into the ground with the throat down. It is important that they fit snugly together.
  4. Paint the finished fence if desired.

See the video for options for such flower beds:

Video tutorials on making crafts from plastic bottles for beginners

It can be difficult for novice needlewomen to create an original craft based on pictures alone. To do this, experienced craftsmen shoot interesting videos for free, where they step by step describe the stages of creating a particular figure. Visual examples will help you repeat all the steps of the presenter and make beautiful things using plastic bottles. At the next master classes, you will learn how to make a hedgehog, a rag doll, chamomile flowers, an autumn bird feeder, a crocodile, mushrooms, how to decorate a summer cottage with corks. Watch interesting videos with a detailed description of all actions:

How to decorate a summer cottage with corks from plastic bottles

Photo ideas of handicrafts from plastic bottles made by hand

When creating crafts, it is important to get ideas, thanks to which you can make really interesting and beautiful things. Many people make unusual products with plastic bottles, and then shoot them with a camera. A variety of decorations for your home, yard or summer cottage, made by craftsmen, will help you choose your own version or come up with something new. See a lot of photos of crafts from plastic bottles.

Useful Tips



7. Pick up the fabric and thread the string through it.



Master class from plastic bottles. Mobile phone holder.



You can also make a good and very useful mobile phone holder from a plastic bottle. You need it when you urgently need to charge your phone, you have found an outlet, but there is nowhere to put the phone.

Prepare a 0.5 liter plastic bottle and poke a hole with a knife to further cut off the unwanted part of the bottle.

Use scissors or a utility knife to cut a circle for the fork.




It remains only to insert the cord from the charger into the "neck" and plug it into an outlet.

Master class from a plastic bottle. Chandelier.



You will need:

50 plastic bottles (volume 0.5 l)

Flower wire

Plain wire

Bulb

Spray paint

Glue (better glue gun)

Scissors

Stationery knife

1. Prepare plastic bottles and peel off labels.




2. Cut each bottle into a flower shape (see picture). To do this, use a utility knife.



3. Spread the flower petals.




4. When you've done steps 1-3 with all 50 bottles, it's time to paint them. Use spray paint, or you can take a little more time to paint each flower with acrylics. You can choose any color. You can also vary the colors by making some flowers one color and others another.




5. Make a circle using regular wire. Wind up the jute and use a glue gun to glue it to the wire. You will have a chandelier base to which the flowers will be attached.




6. Using flower wire, attach each flower to the circle you made from the wire.




There are two ways to attach a flower wire to a flower: wind it around the neck, or glue it.




This is what the first layer looks like.




7. Repeat all steps to make several layers. In this example, 3 layers were made.

8. Use jute to attach the chandelier to the ceiling (see picture).



What can be made from plastic bottles. Sprinkler.

Just make holes in the plastic bottle cap with an awl or nail.




Products from plastic bottles. Funnel.








Plastic products from bottles. Money box.



1. Prepare a plastic bottle. Wash it with hot soapy water and leave to dry.

2. Cut out details such as ears, eyes, patch and nostrils from colored cardboard.

3. Attach all parts with glue or double tape.

4. Wrap the bottle with patterned paper.

5. For the legs, you can use empty spools that need to be glued to the bottle.

6. Make a cut at the top for the coins.

We make a dispenser for plastic bags from a plastic bottle




You only need one 3 liter plastic bottle to hold your plastic bags.

Just cut off the bottom of the bottle so you can tuck the bags in, and the neck so you can gently pull out one bag at a time.




You can use sandpaper to make the edges of the bottle smoother and even smoother.




We make bracelets from plastic bottles



You will need:

Plastic bottle

Sticky tape (the width of the bracelet depends on the width of the tape)

Double-sided tape

Felt (or other material)

Scissors

Stationery knife

Decorations

1. First, wrap the bottle with duct tape. Make some "rings" as shown in the picture. Everything needs to be done neatly and evenly, since it is the tape that will determine how smoothly you can cut the bracelet out of the bottle.

2. Using a utility knife, carefully cut each ring.

3. Peel off the adhesive tape gently.

4. Glue double-sided tape to the resulting plastic bracelet.

The amount of garbage that each person “produces” grows from year to year. The problem is becoming global, as flying plastic bags and plastic bottles scattered everywhere have made everyone's eyes callus. I am grieving, it turns out, you can help, and even for the benefit of yourself. In any case, this applies to plastic bottles. You will be surprised how diverse and, importantly, useful crafts from plastic bottles can be made in literally a matter of minutes. Well, or the clock ... Depends on the scale.

The buildings

PET (polyethylene terephthalate) is the thermoplastic used in bottles. It will be useful to know its physical properties:

  • density - 1.38-1.4 g / cm³,
  • softening temperature (t melting) - 245 ° C,
  • melting point (t pl.) - 260 ° C,
  • glass transition temperature (t st.) - 70 ° C,
  • decomposition temperature - 350 ° С.

Plastic bottles are very convenient to use, but harmful to the environment, since the polyethylene from which they are made takes more than 200 years to decompose. The same property makes it possible to use practically waste raw materials as a building material. Craftsmen are already building houses from plastic bottles, as well as sheds, summer cottages, hotbeds, greenhouses, fences. Various technologies have been worked out - the approach is quite serious.

How to build a house from plastic bottles

The main idea is to pour bulk material into bottles, screw them with lids and use them as bricks. The bottles are filled with sand and soil. Sand is preferable, as there is too much plant debris in the soil that can rot. It must be sieved, dried, filled into bottles, well sealed, filled up to the very top. It turns out a kind of bricks.

To build a house from plastic bottles, you will need a solution to fill the gaps between the "bricks". There are options here too. It can be an ordinary mortar, which is used when laying brick walls, you can make an earthen mortar. To keep the "bricks" in the wall until the mortar grasps, they are tied with twines from the side of the lids. Later, these "mesh" will come in handy when you plaster the walls. They turn out to be uneven, so alignment is indispensable.

We make a greenhouse, shed, greenhouse

You can build a greenhouse or greenhouse from plastic bottles. In this case, only transparent plastic is used, since it is necessary for the light to pass in sufficient quantity. For the construction of a barn, on the contrary, it makes sense to choose a darker plastic - it will be less visible what is inside.

The first technology - one to one

The second requirement for bottles as a building material is an even shape. Such, you know, without grooves. Otherwise, it will not work to fold the walls so that they retain heat - it will "siphon" into the curly cutouts. Remove labels from bottles and dry them. It is also necessary to prepare pins or rods - bottles are strung on them. Their diameter is small so that the neck passes freely. Now you can start building a greenhouse / shed from plastic bottles.

For the construction of a greenhouse or shed, pillars are dug in at the corners. Frames are assembled from the timber according to the size of the walls. These frames will be the base for the bottle walls. We collect them (frames) on the ground and, in a ready-made form, we attach to the dug-in pillars. When making frames, don't forget the doorway and windows.

We build a frame, cut off the bottom of the bottles, string them onto a pin. From such "columns" we assemble walls, a roof

The construction process begins with cutting the bottom. We string the cut bottles on pins, directing the necks to one side. We insert the bottles with effort so that they become very tight. Having assembled a row of the required height, we attach it to the frame. You can fasten it with clamps, strips cut out of metal, nails ... in any way available to you. We press the second row to the first so that there is a slight deformation. In this position, we fix it. So, row by row, we collect all the walls, then the roof.

Using the same technology, you can make a gazebo. But there is no need for tightness, so you can collect curly and colored containers. It will turn out even more interesting (example - in the photo).

The second technology - we sew plastic

Bottles will also need smooth, transparent or yellow bottles. The central part is cut out of them, obtaining a square-shaped piece of plastic. The pieces are sewn together in long strips. In the strip, the pieces are positioned so that they curl to one side. Then the stripes are sewn into linens. To make the canvas even, the stripes are positioned so that they curl in different directions. As a result, they align each other. Finished canvases are nailed to the frame. This completes the construction of a greenhouse for their plastic bottles.

Such a plan "casing" for greenhouses tolerates winters well, it does not need to be removed. Due to the stitching (many small holes), there is no absolute tightness, which makes it possible to regulate the humidity. You will not be able to heat such a greenhouse, but it will push back the autumn, and accelerate the arrival of spring.

It is possible to sew plastic for a greenhouse by hand, but it is not easy. It will be easier for those who have non-capricious sewing machines. Old Podolsk machines cope with this task. Others may have problems.

Fence and enclosure

You can make a fence out of plastic bottles in various ways. If you need a solid monolithic fence, bottles can be used like bricks. The technology is the same as when building a house. To avoid plaster (after all, there is a great risk that it will collapse) - select the color of the plastic to obtain the required rusink. But in this case, you will have to look for "building material" of the same diameter or lay out patterns from different sizes. In general, the process is creative, no matter how you look.

You can also make a filling for a fence out of plastic bottles. Make a frame, say, of wood, and come up with a beautiful filling from figured containers and their parts.

Furniture from scrap materials: recycling plastic bottles

Not only a house and a fence can be made from plastic bottles, they are also used as a basis for upholstered furniture. The idea is to use plastic containers for the frame, not wood. With tightly twisted lids, they have a high bearing capacity, and assembled in blocks, they are quite capable of withstanding loads of up to 100 kg or more.

A bed made of plastic bottles ... you need a good mattress, and the base is not too difficult to make

Although the furniture is made differently, the general algorithm of actions is the same:

  • You select the "building material" of the same height, tighten the covers well.
  • Collect blocks of the desired size, fastening them with tape.
  • Having assembled the base of the required shape, sew the cover. For softness adding furniture foam rubber.

The trick is to make sure that the bottles fit very tightly to each other and do not move. The slightest backlash can lead to structural destruction. Therefore, collect the blocks slowly, carefully securing them. You can stack bottles in layers, fixing each layer in several places. For the inner layers, it is better to use double-sided tape - the fixation will be more reliable.

Ottomans / benches

The easiest way is to make an ottoman or a bench from plastic bottles. We proceed in the order described above. It is necessary to find bottles of the same height. It is better if they are of the same shape - it is easier to assemble. From plastic containers with tightly screwed lids, we assemble the base in the form of a cylinder. It is desirable that the radius of the base be greater than the height of the bottles, so that the bench will not turn over.

Next, you need to cut two circles from fiberboard, which will be slightly larger than the resulting radius of the base - this is the "bottom" and the base of the seat. We fix them with scotch tape. We take furniture foam rubber and, according to the dimensions obtained, cut out the necessary parts. We sew the cover from upholstery fabric, the colors that match the interior.

Such a bench can be not only round. It is quite possible to make a square one. And so that this furniture is not too light, it can be made heavier by pouring water. But water is not a very reliable business. Better to add sand. Both harder and more reliable.

Sofas, chairs, armchairs

If you need furniture higher than one bottle, proceed as when creating walls for a house. Find "material" of the same shape and height. The first bottle is left intact, the cork is tightened tightly (you can pour sand so that it does not turn over). At the other, the bottom is cut off, put one on top of the other. The bottle goes some distance and does not move further, no matter how hard you make it. If the obtained height is enough - great, if not - we put on the next one. In this way, collect the rows of the desired height, then fasten them into blocks.

There is one more way. It is more reliable in the sense that the bottles are held not by compressed air, but by a mechanical stop. And the walls in them are double, which is also important. The downside is more work, more raw materials are needed. The whole process is illustrated step by step.

  1. We take a bottle, cut it approximately in the middle of the height (the upper part with a smaller neck).
  2. The upper part with the neck (the lid is screwed on) is inserted all the way into the lower one.
  3. We take a whole one of the same size and shape, insert it upside down into the prepared structure.
  4. We cut the third one by about half and put the lower part on the top (with a lid).

From such modules, we assemble blocks of the desired configuration, fastening them with tape. Do not feel sorry for the scotch tape. You can first fasten two bottles, then collect blocks of large sizes from the double ones.

As you can imagine, this technology leaves a lot of bottle tops (half of the third bottle). They can be used to make other crafts from plastic bottles: flowers, more practical things for the household.

Methods for making flowers

The most common plastic bottle crafts are garden figurines and flowers. Read about garden figurines There are other interesting ideas, but there are many interesting animals and insects collected. And we will tell you about flowers from plastic bottles below - these are probably those crafts from plastic bottles that give the most pleasure. The process is simple, there are a lot of possibilities, the result is amazing.

You've probably noticed that the bottom of a PET bottle looks like a flower. All you have to do is find a bottle of a beautiful color, cut off the bottom of it. Now you have already got a pretty flower. In the middle, you can add petals cut from the central part, a core made of a strip of plastic cut into noodles, or glue beads inside, but about everything in a little more detail.

Using the power of fire

For work, you will need a marker, a lighter or a candle (it is more convenient with a candle). If available, use a pair of pliers, tweezers or pliers to hold the workpieces while processing. You will also need acrylic paints, you may need glue and beads. The whole manufacturing process boils down to several steps:


There are a lot of options here. Just start doing. Immediately, it may not work out perfectly, but you will understand what and how you can fix it. Look at a few more pictures with step-by-step photos of the process of making flowers from plastic bottles.

The most simple

For beginner craftsmen, you can try making flowers from simple shapes of plastic bottles to decorate the garden. In this case, milk containers can also be used. To avoid staining the plastic, look for colored ones. And it is not so important whether they will be transparent or not. They can be combined to produce flowers of different shapes.

To create such colors, use the part near the neck. It is cut to form petals. Next - warm it up a little, giving the desired bend to the petals, a little paint, a core of a melted piece with a thread (a bottle of a smaller diameter, a pharmacy will do too). So it turned out a buttercup.

Another option is to cut from the neck into strips of equal width - 1-1.5 cm, bend them (warming up a little at the base). Make the middle whisk from the side of a milk bottle or paint the clear plastic with acrylic paint.

The middle is any bright one. Here is a piece of cork, but you can cut it into thin noodles, roll it up and then heat it. You will get a shaggy core.

It's all about the form ... Despite the imperfection, they decorate the site

The topic is actually inexhaustible. Flowers from plastic bottles are made in a variety of ways. From simple and uncomplicated to very realistic. It's not so much about skill as about different tastes and desires.

Useful home ideas

PET containers turned out to be such a good material that many useful things are made of them. In this section, we have collected useful crafts from plastic bottles that can be used on the farm.

For the kitchen and not only

If you cut off the bottom of a bottle with a capacity of 2-3 liters, you get a bowl or bowl, and so that its edges are even, they can be melted on a heated iron. But so that the sole does not have to be cleaned later, use a special silicone pad. If not, you can do it through a sheet of parchment for baking.

Food container. Plastic is food grade ...

Cut off the threaded part from the same bottle. 1-2 cm of plastic should remain around the thread (the edges are melted using the already known technology). Now it will not be difficult to hermetically close any package: we pass it through the cut neck, wrap it out, twist the lid.

The bottoms of the bottles attached to the bar make an excellent newspaper shelf (photo on the right). You can also store umbrellas.

From the plastic cut into strips, containers of various shapes can be weaved. Bottles need an even shape, with thick walls. They are cut into strips of a certain thickness. It is necessary to cut in a spiral - as a result, rather long stripes are obtained. If their length is not enough, they are perfectly sewn.

Lampshades

You can even make a lampshade, but on one condition: you will use such crafts from plastic bottles in lamps with - only they almost do not heat up. Plastic is incompatible with other lamps. Let's describe three ways to make a lampshade from a plastic bottle.

First. You need a large bottle. We draw it into strips of the same width. At the beginning and at the end of each strip, we make holes with a heated soldering iron or a nail heated on fire. We insert scissors into this hole, cut. Straight stripes are obtained.

When the strips are cut, we also make a hole in the bottom, pass thick fishing line through the neck, take it out through the hole in the bottom, and attach the decor on the back side. You can - a button, you can - a pebble of a suitable color. Now pulling the line, we get an interesting shape of the lampshade. You can put a low power light bulb in it.

Another lampshade was made using a similar technology. But then a part of the bottle with a neck was cut into strips, the strips were wrapped and fixed on the neck. To give the desired shape, the fold can be slightly warmed up over a candle or lighter flame. We attach the resulting "flowers" to the base. So we get an unusual design.

They also make lampshades from the bottoms. It is necessary to find a sufficient number of identical bottles, cut off the bottom of them, glue together with the help of universal glue (choose transparent). The main thing is that it glue the plastic and freeze quickly.

Flower vases

Making a vase from a plastic bottle - what could be easier ... Just cut off the neck and you're done. But there is a technique that allows you to get patterned walls. You will need the thinnest soldering iron tip. Its power should not be too high. Then everything is simple: with the help of a heated sting, you burn out the patterns.

Magically! To make the drawing appear brighter, we take acrylic paint and paint the resulting beauty. The paint can be in a regular can, but it is faster and more convenient to work with a spray can.

These are the options ...

Photo ideas

Crafts from plastic bottles are such an extensive topic that it is impossible to tell about everything. What's nice, knowing a few tricks, you can easily find out how and what to do by looking only at the photographs. So here we have collected a few ideas that seemed interesting to us.

You can even make a boat….

And this is just a decoration….