Do you want to build something big and beautiful, but it takes a very long time to build by hand? There is a way out - the program MCEdit, which will greatly simplify the construction and save your time.

Installation

In order to work with the program, it must be copied to a computer. You can do this in two ways:

  1. The first is to download the setup file and run it. After that, you need to select the installation location of the program and wait about a minute. That is, this usual setup;
  2. The second way is to download the archive and unpack it to the right place. I like this method better, because it takes less fiddling, and when you uninstall the program, you don’t have to remove shortcuts and clean registry entries. That is, this is the installation of the portable version.

First start

So let's start. A black box with yellow captions will appear.

We need the inscription "Open a level ..." with its help, we will open the one we need. How to do it? Click on the inscription, and find the folder with minecraft (% appdata% / .minecraft /). After that, go to the saves folder, and then to the folder with the map. The level.dat file will be there and we open it. If the file is not corrupted, the map will appear. Screenshot example:

Basic Tools

  • After loading the map, 9 squares with icons will appear at the bottom of the window. These are the tools. The first one (on the left) is selection. It allows you to select the required area of ​​the map. To do this, move the cursor to the desired cube, and click on the left mouse button. Then, holding down the right mouse button to rotate, and using the W, A, S or D buttons, you need to move to another area and click on another cube with the left mouse button. Thus, a zone in the form of a parallelogram will be selected;
  • The next tool is brush. With it, you can install, remove or replace cubes. After selecting it, a window for selecting options will appear on the left. There you can choose the shape of the brush - to do this, click on the yellow inscription to the right of the brush inscription. You can also change the size of the brush, for this you need to enter the numbers you need to the right of the letters L, W, H;
  • Another useful tool is copying. To use it, you must first select the area, and then double-click on copy. A copy of the selected area will appear, but in a green tint. In the window on the left, you can rotate the object in three planes, as well as reflect horizontally or vertically. After that, moving the mouse, select the place where you want to put the object, and press the left mouse button. You can then move the object by entering your values ​​in the shapes to the left of the nudge label. Then you need to confirm copying by clicking on the yellow inscription Clone;
  • There is also a tool FILL. It allows you to change the cubes in the selected area. To use it, you need to select an area, and click on the FILL button. Then it is necessary in the window that appeared in the center, select the required cube and click on OK, and then on FILL in the window on the left. Thus, the entire selected area will be replaced by the selected cubes;
  • There is a Filter tool, but we will not need it, as it is intended for the minecraft classic version;
  • The button labeled Import allows you to import a scene in schematic format, which is created by another program, which will be discussed in another article. For example, you can create a ring, or a bridge, and then insert it into the game;
  • The following 2 tools and images of the player's head allow you to move both the player himself and the spawn point where he will appear after death;
  • Well, finally, the last tool is chunk control . It will also not be needed in construction;
  • The only option I use is Relight , which allows you to recalculate lighting in a chunk.

Personal opinion

In my opinion, the program is very useful. It allows you to save a lot of time, especially when you need to make large walls or put a lot of the same objects. But the program has 2 big minuses. A snapshot of minecraft has recently been released, with a new anvil map format. And this program does not support it. In addition, in this picture, the maximum height of the world has become 256 instead of 128, but MCEdit can only build up to 128. I hope the developers will fix this soon.

When working with minecraft maps, we often need to cut out certain areas, add new biomes, regenerate and much more. Standard game tools and plug-ins do not always help, so you have to use third-party software. Today I want to tell you about the program MCEdit 0.1.7.1 minecraft. This program will allow you to operate with millions of blocks at the same time without any load on the processor and RAM of the computer. You have probably noticed more than once that in a single player, and in a multiplayer minecraft game, maps take a long time to load. After all, yes?

With this, you can avoid such problems. Now I will tell you an example of using this software. Let's say we need to copy a building to a server. The problem is that the map is in a single player game, and we need to transfer some part of the building to a server where people play on the Internet on one joint project. So, such a problem is solved in a few minutes using the MCEdit program. We load the map, in which the future building for transfer is located. Next, download the program from our website. Install it on a personal computer and run it.

Now what? Now you need to specify the path to the map. Open it in the editor. Within a few seconds, the entire map will be loaded for editing. Be extremely careful. You need to allocate a certain piece of territory, which will be copied later to the server. To do this, diagonally you need to select the territory. Use mouse keys to highlight and backspace to navigate with control buttons. Ready? Now click on the Save button. Be sure to give a name to the future file and save it in the "schematic" format.

Next, I will tell you how to transfer this file to the server. Log in via ftp access to your minecraft server. Find the plugins folder. In it, go to the section. This is a special plugin that allows us to work with different block volumes on the server. Now copy the saved file to this folder. Subsequently, you will need to go to the server and enter the command //schematic load name.schematic, where name is the name of your saved file. As soon as a piece of the map is loaded into the clipboard, you will need to enter the //paste command and the building will be pasted.
That's what this utility is for. Download MCEdit for minecraft You can visit our website for free. We monitor all updates and post new versions of programs.

Sometimes, you want to do some editing to a world on a massive scale, but you don’t want to spend the hours it would normally take to break, move and place blocks at the usual rate of one at a time. The MCEdit tool is exactly what you're looking for if this sounds like a problem you've had in the past. Essentially, this is a Minecraft world editor that allows you to do practically anything to a world with a few clicks and command prompts. It has been upgraded many times since its initial release, from a program used mostly to move from older buildings versions into newer versions to something else.

By something else, I mean there are new brush tools for laying down whole layers of blocks in unique shapes, as well as Minecraft server integration so you can create custom worlds to your specifications using the inherent Minecraft seed algorithms. The MCEdit World Editor tool is a powerful one and very useful in the hands of a knowledgeable person. But because it is so powerful, it can also cause a lot of irreparable damage to a world and very quickly at that. Before you go messing with this tool, it is recommended you back up your world in a safe place for easy restoration later.

MCEdit Tool for Minecraft 1.8 and 1.7.10 Changelogs

  • Block IDs up to 4096 are now preserved.
  • “Repair Regions” button appears again for Anvil levels.
  • “Analyze” counts the different data values ​​of unknown blocks.

Today I will talk about the MC Edit program, with which you can create your own maps and mount downloaded objects! I will start from the very beginning so that you do not have any difficulties when working with the program!

So what exactly is MC Edit? Mcedit is an open source world editor for any version of Minecraft. Mcedit was first created to allow players to create their own Minecraft maps and make changes to existing worlds! MC Edit allows you to work with tools for laying blocks in various forms, integrated with the Minecraft server to create a landscape! There is support for multiplayer worlds and editors for certain blocks! You can download the program from the official site!

Let's get to work!

So, after you have downloaded MC Edit from the link above, installed it on your computer, run the program from the shortcut on your desktop - mcedit.exe, we have the following window:

Click "Open a Level..." And select the level.dat file in your Minecraft client's save folder!

Your Minecraft map opens before us, which we have to edit!

Let's analyze the controls: The movement is carried out with the W A S D buttons, as in the usual lane! The camera is rotated by pressing the RMB, the selection of the region - LMB!

On the right - we have a window for working with a selected region, where we can: remove the selection, delete the selected blocks, copy this region, paste it to another place and export the scheme to a computer!

The second icon on the hotbar allows you to create mountains from different materials, in this case I have a stone. The choice of material is made on the panel on the left!

Next comes cloning - that is, the transfer of the selected region to another place, which I talked about earlier!

We will skip the next button and move on to import! This button allows you to import ready-made schemes or your own blanks!

Well, the last buttons allow you to transfer the player's spawn!

In the upper left corner, click on the menu - MCEdit

There we press "save" and the world will start to be generated! After successful completion, press Alt + F4 to exit!

Now we go into the game and choose our world!

That, in fact, is all! I think you have mastered the basics of working with this program and I helped you at least a little!

Happy card making, dear readers!