Requirements for the placement of weapons. Order of the Inventory of Weapons and Cartridges by legal entities Order 288 of the Ministry of Internal Affairs of the Russian Federation Consultant

Order of the Ministry of Internal Affairs of the Russian Federation of April 12, 1999 N 288

"On measures to implement the Decree of the Government of the Russian Federation of July 21, 1998 N 814"

June 27, December 24, 2003, July 15, 2005, June 7, 2008, January 11, May 16, 2009, September 29, 2011, 23, 25, April 26, 5, 21, May 25, 27, 29 June 2012, July 15, 2013

In order to implement the Decree of the Government of the Russian Federation dated July 21, 1998 N 814 "On measures to regulate the turnover of civil and official weapons and cartridges for him in the territory of the Russian Federation" * (1) - I order:

1. To approve the attached instructions for organizing the work of the internal affairs bodies for monitoring the turnover of civil and official weapons and the cartridges for it in the territory of the Russian Federation.

2. Heads of Doop (Gurabow I.I.), Guoj (Selivanov IF), Gubop (Selivanov V.V.), GUVDT (Getman N.I.), Uro (Terekhova A.A.), Guro ( Korzhov V.M.) of the Ministry of Internal Affairs of Russia, the Ministers of the Interior, Heads of the Central Internal Affairs Directorate of the Division of the Russian Federation, Chiefs of the Department of Internal Affairs of the Ministry of Internal Affairs of the Ministry of Internal Affairs of the Ministry of Internal Affairs of the Ministry of Internal Affairs of Russia.

2.1. Bring to the attention of employees of the internal affairs bodies of the provisions of this order.

2.2. Adoption of tests for knowledge by employees of the internal affairs bodies of the instructions approved by this order.

3. Heads of Doop (Golubevi I.I.), GVDT (Hetman N.I.), Uro (Terekhov A.A.) of the Ministry of Internal Affairs of Russia, the Ministers of the Interior, Chiefs of the Central Internal Affairs Directorate, the Department of Internal Affairs of the Russian Federation, Chiefs ) URO MVD of Russia:

3.1. Make measures by:

personnel and material and technical strengthening of divisions of licensing and permits, taking into account the increasing volume of work;

recycling provisions on divisions of licensed permits and job descriptions of employees who perform this work.

3.2. Provide in the first half of 1999:

3.2.1. Conducting the requirements of the instructions approved by this order, inventory of weapons and cartridges to it, which are available from legal entities with special statutory tasks, legal entities, organizations engaged in the testing of products on the bulbs, legal entities collecting weapons and cartridges, sports organizations and educational institutions, organizations leading the hunting farm engaged in reindeer herding in the regions of the Far North and equivalent areas of localities, specialized enterprises leading hunting or marine crafts.

In the future, inventory is carried out annually as of January 1, the results of which are in the prescribed manner to report to the DOP of the Ministry of Internal Affairs of Russia until February 1.

To involve to participate in inventories and comprehensive surveys of the objects of storage of weapons and cartridges of employees of licensing units, rear divisions * (2), precinct police inspectors, private security specialists, fire services and other interested units of the internal affairs bodies.

3.2.2. Allocation of service premises for the reception of citizens and the equipment of their reference and information documentation on the procedure for issuing licenses and permits, filling out documents submitted to obtain, renewal, extend the validity period of licenses and permits, as well as re-registration of weapons.

4. Doop (Golubev I.I.), Hozu (Nephesina P.V.), GFEU (Yamshchikov S.V.) of the Ministry of Internal Affairs of Russia:

4.1. To organize the manufacture of new forms of licenses and permissions at the expense of funds coming from issuing licenses for the current curriculum of the Ministry of Internal Affairs of Russia and their issuance to the internal affairs authorities.

4.2. Determine the procedure for the write-off and timing of the destruction of unspent forms of licenses and permits of an old sample, to ensure control over their passing and destruction in the prescribed manner.

5. DOOR (Golubev I.I.), Gukikp (Chernenko AG) and Guro (Korzhov V.M.) of the Ministry of Internal Affairs of Russia in a 3-month term to develop and submit a draft instruction on the procedure for the transfer of firearm short-barreed weapons and cartridges To it for storing and carrying individual categories of military servicemen of the Interior Ministry of Internal Affairs of Russia and employees of internal affairs bodies, under Article 19 of the Federal Law "On Arms", in which to provide the procedure for the implementation of cartridges for firearm short-barreed weapons, including persons awarded Name weapon.

6. GU NPO "Special Technique and Communication" (Chemichyev V.A.), Ecc (Carlinna I.P.), Guro (Korzhov V.M.) of the Ministry of Internal Affairs of Russia In coordination with the DOP of the Ministry of Internal Affairs of Russia in a 6-month term to develop and To apply for approval, the draft Regulation on the procedure for conducting a technical inspection of weapons and cartridges, in which to determine the requirements for the technical condition of weapons and cartridges to it, ensuring their safe use of legal entities and individuals, as well as determine the mechanism for making changes and additions.

7. Doop (Golubevi I.I.), Gubop (Selivanov V.V.) and Guro (Korzhov V.M.) of the Ministry of Internal Affairs of Russia in a 3-month period to prepare proposals for amending and additions to regulatory legal acts of the Ministry of Internal Affairs of Russia in connection with the publication of this order.

8. Install that:

8.1. Internal affairs bodies produce issuance of licenses and permissions of the Ma series, TA and CA to their full spending.

8.2. The order of the USSR Ministry of Internal Affairs of May 6, 1987 N 0113 applies only to parts concerning explosive materials.

dated December 30, 1993 N 609 "On measures to implement the Resolution of the Council of Ministers - the Government of the Russian Federation of December 2, 1993 N 1256" On measures to implement the Law of the Russian Federation "On Arms" * (3);

dated March 21, 1996 N 146 "On making amendments and changes to the instructions approved by the Order of the Ministry of Internal Affairs of Russia dated December 30, 1993 N 609" * (4);

of November 25, 1996 N 620 "On Amendments and Additions to the Instructions, approved by the Order of the Ministry of Internal Affairs of Russia dated December 30, 1993 N 609" * (5);

dated November 2, 1993 N 478 "On measures to implement certain provisions of the Law of the Russian Federation" On Arms "and the Law of the Russian Federation" On private detective and security activities in the Russian Federation "* (6).

10. Control over the implementation of this order is entrusted to deputies of the minister for the supervised areas of activity.

Registration N 1814.
application
toorder Ministry of Internal Affairs of the Russian Federation
dated April 12, 1999 N 288
Instruction

in order to organize the work of the internal affairs bodies for monitoring the turnover of civil and official weapons and cartridges for him in the territory of the Russian Federation

With changes and additions from:

June 27, December 24, 2003, July 15, 2005, June 7, 2008, January 11, May 16, 2009, September 29, 2011, 23, 25, April 26, 5, 21, May 25, June 27, June 29, 2012, July 15, 2013
I. General provisions
1. This instruction in accordance with the Federal Law "On Arms" * (1) and Decree of the Government of the Russian Federation dated July 21, 1998 N 814 "On measures to regulate the turnover of civil and official weapons and cartridges for him in the Russian Federation" * (2):

regulates issues related to the design, issuance, extension and cancellation of licenses for the acquisition, collecting or exhibiting civil and service weapons, the main parts of firearms and cartridges to it * (3), storage permits, storage and use, storage and wearing weapons and cartridges, permits for the import of weapons and cartridges in the Russian Federation and export of them from the Russian Federation, permits for the transportation or transportation of weapons and cartridges, as well as permits for using weapons on rifle objects and notifications for selling weapons or cartridges;

delimits the competence of officers of the internal affairs bodies on the implementation of control functions in the sphere of weapons and cartridges;

determines the requirements for legal entities and citizens in the implementation of legal rights related to the use of weapons, as well as a system of measures to ensure the safety of weapons;

sets the mandatory requirements for maintaining weapons and cartridges.
II. Powers of internal affairs authorities for licenses and permits
2. Excluded.

3. Ministry of Internal Affairs in the republics, the main governance, the management of the Ministry of Internal Affairs of Russia for other constituent entities of the Russian Federation * (5) exit licenses:

the second paragraph is excluded;

on collecting, exposure to weapons and cartridges to legal entities.

4. Excluded.

5. Excluded.

6. Excluded.
III. Order of reception, consideration and design of materials on issuing licenses and permits
7. Materials on issuing licenses are considered by the internal affairs bodies up to one month, on issuing permits - up to two weeks from the date of application.

Licenses and permissions are issued after payment of the established sizes of one-time fees approved by Decree of the Government of the Russian Federation of June 8, 1998 N 574 "On the size of one-time fees charged for issuing licenses, permits and certificates provided for by the Federal Law" On Weapons, as well as for extending The time of their action "* (6).

Without challenge one-time fees, it is issued:

a) licenses for the acquisition, storage permits, import (export) and transportation of the main parts of firearms;

b) licenses for the purchase of cartridges to legal entities in the Russian Federation;

c) licenses for collecting and exposing the cartridges to legal entities;

d) permits for the use of weapons (in a dash, short-standing complex, on shooting range);

e) permits for transportation of weapons and cartridges.

8. Applications for issuing licenses and permits are accepted in the reception days at the prescribed time by employees of the licensing and permits of the internal affairs bodies or employees who are entrusted with such duties in specially allocated for these purposes.

Reception of citizens and managers of legal entities who received the individual number of the electronic queue on the reference and information portal "Public services" Internet networks are carried out on the prescribed day and time.

9. Appeals of legal entities are considered by the internal affairs bodies at the place of registration of legal entities * (7) or at the location of protected objects and (or) places of weapons storage.

Applications of citizens of the Russian Federation on issuing licenses and permits, re-issuance and extension of their validity of their action are submitted to the internal affairs authority at the place of residence.
10. Appeals to the import of foreign citizens belonging to them weapons and cartridges to participate in sports competitions (with the exception of importation in the Russian Federation of sports pneumatic weapons with dulk energy not more than 7.5 J and caliber up to 4.5 mm inclusive), in order to hunt or Exposures are submitted by legal entities that have entered into relevant contracts or sending invitations in the prescribed manner.

Foreign citizens for obtaining a license for the purchase of civil arms and cartridges for it in the Russian Federation, as well as permits for their export from the Russian Federation, are a petition for the diplomatic missions of states, whose citizens they are in Guooopop.

11. Information on the admission of citizens, their passport data, the data of legal entities are recorded in the registration log of applications, appeals, issuing licenses and permits (Appendix 30). It simultaneously register the submitted documents, there are marks on the results of their consideration, as well as records of issuing licenses or permissions or written notifications about the refusal of their extradition (Appendix 31).

Before registration, the passport details of citizens with those specified in the statements, and the submitted materials are verified for compliance with the requirements of this Instruction, the provisions of the constituent and registration documents of legal entities.

12. Not allowed to register applications and incoming materials that do not have the necessary documents in accordance with the list established in this Instruction, or decorated with violation of the requirements of this Instruction.

13. The documents compiled in foreign languages \u200b\u200bare attached their translations, certified in the prescribed manner.

14. On the registration of the materials received by the applicant is a notification talon-notification (Appendix 32), indicating the person who accepted the documents and the date of registration of the application. Applications and received materials within two days are reported by the management of the internal affairs body for consideration and transferring written instructions to performers.

15. When obtaining a license for collecting weapons and cartridges, the head of the legal entity must be submitted:

a) application (Appendix 33);

b) certified copies of constituent documents and certificates of state registration of a legal entity;

c) contracts for renting premises, buildings, warehouses used for storing or placement of weapons and cartridges, or documents confirming the ownership of these premises;

d) excluded;

e) acts of commission surveys of premises intended for the storage and placement of weapons and cartridges, employees of the licensing and permitting work of the internal affairs bodies;

(e) ACT, compiled by a division of private security under the internal affairs authority at the location of the object on the compliance of equipment of places of storage of weapons and cartridges, the requirements of the Ministry of Internal Affairs of Russia;

g) copies of orders of the head of a legal entity for the appointment: Deputy Head of the Legal Facility or Person responsible for the safety of weapons and cartridges * (8);

employees (keepers of museums) responsible for the storage and issuance of weapons and cartridges in the places of their placement, on which the responsibility for their safety is entrusted;

workers made to sell, storing, issuing and conducting permitted types of work with weapons and cartridges.

The documents specified in this paragraph are also submitted to extend the licenses issued. When making changes to the license, only documents containing information on specific legal facts that caused such changes as well as the associated additional materials are submitted.

16. Excluded.

17. To obtain licenses for the purchase of weapons and cartridges at the initial appeal, heads of organizations (with the exception of managers of supplier legal entities, as well as legal entities engaged in collecting weapons and cartridges) must submit to the internal affairs authority:

a) application (Appendix 36);

b) copies of constituent documents and certificates of state registration of a legal entity;

c) documents confirming the legality of the possession of premises, buildings and warehouses for storing or placing weapons and cartridges;
By decision Supreme Court of the Russian Federation of November 12, 2010 N GKPI10-1126, left unchangedDefinition The Cassation Board of the Supreme Court of the Russian Federation of December 23, 2010 N CAS10-661, subparagraph "D" of paragraph 17 of this Instruction is recognized as not contradictory legislation in terms of attracting representatives of state sanitary and epidemiological, fire and architectural supervision bodies for the compilation of an act of commission examination

e) acts of commission examinations of premises, buildings and warehouses for weapons storage and cartridges by employees of the licensing and permits of the internal affairs bodies;

(e) Acts drawn up by private security departments under the internal affairs bodies at the location of objects on the compliance of the equipment of their storage of weapons and cartridges of the Ministry of Internal Affairs of Russia;

g) a copy of the order of the head of a legal entity to appoint a person responsible for the safety of weapons and cartridges;

and) lists of employees of legal entities admitted to the storage, issuance, the production of permitted types of work with weapons and cartridges and (or) held periodic inspection on suitability to action in conditions related to the use of firearms;

k) Calculation of the required amount of weapons (Appendix 37), taking into account its rules for this organization, approved by the Government of the Russian Federation or the Ministry of Internal Affairs of Russia (for a separate category of legal entities * (9)).

Subsequently, licenses for the purchase of weapons and cartridges are issued to legal entities to submit applications, information about the presence of existing weapons, and sports organizations (including sports clubs) and educational institutions - on the presentation of applications and information on the presence of existing weapons (cartridges), taking into account The provisions of paragraph 20 of this Instruction.

18. The leaders of legal entities and organizations involved in collecting weapons and cartridges to obtain a license for the purchase of weapons and cartridges represent an application (Appendix 38), as well as copies of concluded contracts (contracts) on weapons and cartridges.

Legal persons engaged in testing products on a bulweralness, together with a statement pose copies of concluded contracts (contracts).

Weapons and cartridge certification authorities, testing laboratories (stations) to obtain a license for the purchase of weapons and cartridges represent a statement, while the corresponding internal affairs body may request the above confirmation of the State Committee of the Russian Federation for standardization and metrology * (10).
19. Museums for obtaining a license to acquire their weapons of interest to the Museum Fund of the Russian Federation at the same time as a written appeal are in the territorial bodies of the Ministry of Internal Affairs of Russia at the regional level at the place of their finding:

a) a copy of the contract of donation (exchange) of individual models of weapons (collections), certified in the prescribed manner, or a written statement of the donator, as well as in cases provided for by federal law, documents confirming the ownership of the donor to the transmitted exhibits;

b) the petition of the Ministry of Culture of Russia on the acquisition of specific weapons models with the indication of information about them.

The acquisition of museums of collections of weapons and cartridges to the public part of the Museum Fund of the Russian Federation in legal entities and citizens is carried out without obtaining licenses for the written appeal of museums agreed with the internal affairs bodies.

20. Registration of legal entities for the purchase of cartridges are made in the manner prescribed for registration of licenses for the purchase of weapons.

At the same time, for the acquisition of cartridges, instead of spent, lost either by destroyed by the applicant, further seems:

a) acts of write-off of cartridges (Appendix 39), approved by the heads of legal entities and coordinated with the relevant internal affairs authority;

b) transparent surpasses for ammunition spent during training and other shooting (applications 40 and 41) or other documents confirming the legality of their write-off;

c) acts of reception (transmission) of cartridges in the internal affairs bodies.

21. Before issuing or extending the term of licenses for collecting and permits for storage, storage and use of weapons to legal entities, permits for the use of weapons in ties, small-standing complexes and on shooting groups, commissions of its storage conditions, technical strengthening of objects, security of security events, availability of accounting documentation. According to the results of the examination of the premises of legal entities - weapons storage facilities and cartridges are drawn up with an act (Appendix 42), which indicates the amount of weapons and cartridges permitted to storage, as well as the presence of conditions for their placement (in safes, cabinets, pyramids, drawers, on racks) and equipment facilities by means of security and fire alarm.
By decision Supreme Court of the Russian Federation of March 20, 2002 N GKPI02-135 Paragraph 22 of this Instruction is recognized as not contrary to current legislation
22. Citizens of the Russian Federation for the first time acquire gas pistols or revolvers, signaling weapons to obtain licenses for their acquisition should submit to the place of residence in the internal affairs authority:

a) Application (Appendix 43) indicating passport data and information about the weapons available. In addition, the statement indicates addresses of residence (residential buildings with equipped places for weapons storage and cartridges);

b) a photocopy of the passport of a citizen of the Russian Federation or other document certifying the identity and citizenship of the Russian Federation, which, after comparison with the originals, are assigned by the personal signature of the responsible performer on the free field of the document, indicating the date of reception of the document;

c) two photographs of 3 x 4 cm sizes;

d) medical conclusion about the absence of the applicant contraindications for the possession of weapons * (11).

The list of these documents is also submitted to the internal affairs bodies when extending licenses and permits.

Persons undergoing military service represent instead of medical documents from personnel units on the passage of this service and the consolidation of tablet weapons, and citizens with firearms and employees of legal entities with special statutory tasks instead of the above medical conclusions and references - storage permit, storage And weapons wearing, including service. In the absence of these documents, these persons submit documents on general reasons.

23. The application for issuing a license to acquire hunting combined weapons is indicated by the timing of the Hunting Glad-Breeding Long-Term Weapon (at least 5 years) or information about the professional activities associated with hunting. The application is made to an extract from the order of the head of the organization, the leading hunting economy, hunting or marine crafts, about the appointment of a citizen to the appropriate position.

24. When re-appealing to the internal affairs authorities on obtaining a license, a citizen of the Russian Federation represents only a statement and documents indicating the change in previously outlined personal data.

25. The owner of the weapon to acquire certified interchangeable (contributable) trunks to firearm long-life weapons should obtain a license for their acquisition in the manner prescribed by this Instruction to obtain a license for the purchase of cutting weapons.

26. A citizen of the Russian Federation upon receipt of a license for the acquisition of weapons in collecting purposes is at the place of residence in the internal affairs body (Appendix 44), with an indication of the existing conditions for ensuring the safety of weapons and information about the license issued to its collecting.

Civil cold clink weapons, as well as replicas and copies of antique weapons are purchased by citizens of the Russian Federation, taking into account the requirements of Article 13 of the Federal Law "On Arms" on the presentation of a license for its collecting.
27. To obtain a license for the acquisition of weapons in the order of donation or inheritance, legal entities and citizens of the Russian Federation are submitted at the place of registration or at the place of residence in the internal affairs bodies, and foreign citizens - in Guooopa \u200b\u200bof the Ministry of Internal Affairs of Russia, documents provided for for the acquisition of the corresponding category of civil arms, and documents confirming the right of inheritance, photocopy of donation agreements, which are certified in the manner prescribed by this Instruction, or in cases where the execution of contractual relations is not provided - the application of the donor in writing.

28. Before making decisions on issuing licenses at the place of residence of citizens of the Russian Federation, checks are carried out to ensure the conditions for the safety of weapons and the presence of locks on the castle of safes, metal cabinets, drawers from high-strength materials or wooden boxes, with iron, as well as identifying circumstances that prevent weapons preservation.

Check materials are involved in the statements of citizens.

29. According to the results of the study of the application received by the materials and the inspections carried out, in the absence of circumstances that impede the issuance of a license, an employee of licensed permits or a person who performs such duties, makes a conclusion about the issuance of a license and a statement is recorded as follows: "I would have thought possible Issue a license ", which is assumed by a personal signature.

This conclusion is agreed with the head of the internal affairs body or his deputy head of the police of public security or persons who perform their responsibilities. Appropriate stamps can be used to design and solutions, the text part of which is assigned by signatures of authorized officials.

After that, the applicant is issued a notification (Appendix 45) to pay the established one-time fee for issuing a license indicating the amount and details required for paying the collection.

30. In the presence of circumstances impeding the issuance of a license, an appropriate motivated conclusion for the signature of the person who carried out the consideration of the application and received materials, which is approved by one of the leaders of the internal affairs body that has the right to sign licenses.

Based on the motivated conclusion, the applicant is sent a written notice of refusal to issue a license, indicating the specific norms of legislative and other regulatory legal acts of the Russian Federation, regulatory legal acts of the Ministry of Internal Affairs of Russia, which caused the adoption of a negative decision.

31. Materials on issuing licenses for collecting and exposure of weapons and cartridges within 2-week period from the date of registration of the application, together with the acts of commission examination of the facilities of a legal entity, are sent to the Ministry of Culture of Russia or the territorial bodies of cultural values \u200b\u200bauthorized by him for coordination in the prescribed manner.

Appendix N 53.

Order of the Ministry of Internal Affairs of the Russian Federation of 12.04.99 N 288 (Ed. Dated 05/16/2009) "On measures to implement the Decree of the Government of the Russian Federation of July 21, 1998

N 814? (together with the "Instructions for organizing the work of the internal affairs bodies for monitoring the turnover of civil and official weapons and the cartridges for it in the territory of the Russian Federation") Actual in 2015 2. To start shooting from weapons only after studying its device, the procedure for interaction between components , methods of disassembly, assembling, charging and discharge, aiming and making methods for firing, as well as these rules.

Order of the Ministry of Internal Affairs 288 with changes for 2017 with applications

Applicant: Leusch Andrey Viktorovich, registered at the place of residence: 141016, Moscow region,

Mytishchi-16, ul. Wide, house 14, apartment 7, tel. 8-903-554-82-57 Application for recognition of invalid item 67 (in terms of the mandatory requirement to submit to the internal affairs body at the place of accounting of weapons of applications and other documents necessary to obtain relevant licenses and permits for three months before the expiration of the licenses issued , as well as permits for storing, storing and carrying weapons) Instructions for organizing the work of internal affairs bodies for civil and official weapons and cartridges on the territory of the Russian Federation approved by the Order of the Ministry of Internal Affairs of the Russian Federation of 12.04.1999.

Official Internet portal

Order of the Ministry of Internal Affairs of the Russian Federation dated January 24, 2017 No. 26 "On approval of the procedure for submitting an educational institution notification of the completion or termination of the training of a foreign citizen (stateless person), who studied on the main professional educational program that has state accreditation, and the forms of this notice" ( Registered in the Ministry of Justice of Russia 17.02.2017 № 45698)

The schedule of the commission weekly for the delivery of a qualifying exam and conducting periodic checks of private guards and employees of legal entities with special statutory tasks for suitability in conditions related to the use of firearms and special funds: Federal Law of December 22, 2008 No. 272-FZ " On Amendments to Certain Legislative Acts of the Russian Federation in connection with the improvement of state control in the field of private security and detective activities, "since July 1, 2009, new requirements for obtaining the legal status of a private security guard are introduced, providing for the mandatory qualification exam (hereinafter - the exam).

Official Internet portal

UFSVng RF in the Republic of Dagestan Center for licensing and permits

Order of the Ministry of Internal Affairs 288 with changes for 2018 with applications

8-903-554-82-57 Application for recognition of invalid item 67 (in terms of the mandatory requirement to submit to the internal affairs body at the place of accounting of weapons of applications and other documents necessary to obtain relevant licenses and permits for three months before the expiration of the licenses issued , as well as permits for storing, storing and carrying weapons) Instructions for organizing the work of internal affairs bodies for civil and official weapons and cartridges on the territory of the Russian Federation approved by the Order of the Ministry of Internal Affairs of the Russian Federation of 12.04.1999.

Appendix N 53.

dated 05/16/2009) "On measures to implement the Decree of the Government of the Russian Federation of July 21, 1998

N 814? (together with the "Instructions for organizing the work of the internal affairs bodies for monitoring the turnover of civil and official weapons and cartridges for him in the territory of the Russian Federation") relevant in 2015 2.

To start shooting from weapons only after studying its device, the procedure for the interaction of components, disassembly techniques, assembly, charging and discharge, methods of aiming and making shooting, as well as these rules.

Order 288 MVD with applications

Very needed an order of the Ministry of Internal Affairs of Russia from 12.01.2009 N 13 (with change. The person has repeatedly asks this order with the 'instructions and applications', and taking into account the fact that the reference in the RG does not open an order. Order of the Ministry of Health of the Russian Federation of October 13, 2015 Order of the Ministry of Internal Affairs of the Russian Federation of 26.05.2000 by the order of the Ministry of Internal Affairs of January 12, 2009

Rules for storage, weapon savings and ammunition.

Order of the Ministry of Internal Affairs of the Russian Federation from 1. N 1. 3 In the objectives of improving the procedure for supplying, storing, accounting, issuing (admission) of weapons and ammunition, preventing cases of loss and embezzlement in the internal affairs bodies of the Russian Federation, I order: 1. Instructions for the organization of supply, storage, Accounting, issuing (admission) and ensure the safety of weapons and ammunition in the internal affairs bodies of the Russian Federation (Appendix N 1 is not given). Instructions for categorizing weapons, ammunition, special and other material and technical means in the internal affairs bodies of the Russian Federation (Appendix N 2 is not given). Head of the central office of the Ministry of Internal Affairs of Russia, units, directly subordinate to the Ministry of Internal Affairs of Russia, heads of the main departments of the Ministry of Internal Affairs of Russia for Federal Districts, the Ministers of the Interior, Heads of the Main Departments, Department of Internal Affairs Directors, Internal Affairs Directors cases in closed administrative-territorial entities, on particularly important and regime objects, management of material and technical supply, research and educational institutions, bases (warehouses) of the storage of resources of the Ministry of Internal Affairs of Russia within a month from the date of receipt of this order: 2. Organize in subordinates Units Study of the instructions specified in subparagraphs 1.

An order, employees approved for accounting, storage, issuing armaments and ammunition, followed by accepting tests. Develop and approve in subordinate divisions by job descriptions for operational duty officers, specialists in armament, as well as relevant officials of the internal affairs bodies, institutions and divisions, which are related to the work on the organization of supply, storage, accounting, issuing (reception) and ensure safety Weapons and ammunition, as well as other acts of management to implement the instructions specified in subparagraphs 1.

Dated January 12, 2009 N 13. Instructions for categorizing weapons, ammunition, special and other material and technological means in the internal affairs bodies of the Russian Federation (Appendix N 2. Type of document: Order of the Ministry of Internal Affairs of Russia.
Order of the Ministry of Internal Affairs of Russia dated January 12, 2009.

Order. 2. 3. To carry out a comprehensive examination and retrofitting of weapons and ammunition warehouses in accordance with the requirements of the regulatory legal acts of the Ministry of Internal Affairs of Russia, to these structures. - - - - - - - - - - - - - - - - - except the GKVV Ministry of Internal Affairs of Russia . To consider the orders of the Ministry of Internal Affairs of Russia with the invisible strength of the Ministry of Internal Affairs of Russia from 1. N 2. 69, from 2. March 0 1. N 1. 67, from 1. April 2 1. Control over the implementation of this order to be entrusted to the Deputy Minister of Lieutenant Militia M. M. Smirny and organizational and inspection department of the Ministry of Internal Affairs of the Russian Federation.

Minister of Minister of Army. R. Nurgaliyev. The Association assists in the provision of services for sale in timber: a ram edge price at competitive prices on an ongoing basis. Forest products of excellent quality.

Download: Order of the Ministry of Internal Affairs of the Russian Federation from 1. N 1. 3 Measure: Order of the Ministry of Internal Affairs of the Russian Federation from 1.

laintech694.weebly.com

Order 288 MVD with applications

Order: 1. Approve: 1.1. Instructions for the organization of supply, storage, accounting, issuing (reception) and ensuring. 3. To consider the orders of the Ministry of Internal Affairs of Russia from July 12, 1995 No. 269, from July 20, 1997, dated April 20, 1997 No. 269, dated April 12, 1999.

The order of the Ministry of Internal Affairs of Russia is very necessary from 12.01.2009 N 13 (with change of 24.10.2013) 'about the organization of supply, storage, accounting, issuing (admission) and ensure. A person has repeatedly asks this order with the 'instructions and applications', and taking into account the fact that the reference in the RG does not open an order from January 12, 2009 No. 13. 1.2. Instructions for categorization of weapons, ammunition, special and other material and technological means in the internal affairs bodies of the Russian Federation (Appendix N 2. Type of document: Order of the Ministry of Internal Affairs of Russia ..

Error. Sorry, The Page You Are Looking for Is Currently Unavailable. Please Try Again Later. If You Are The System Administrator of this Resource Then You Should Check. Faithfully Yours, Nginx.

ORDER. dated January 12, 2009 N 13. 1.2. Instructions for categorizing weapons, ammunition, special and other material and technological means in the internal affairs bodies of the Russian Federation (Appendix N 2 - is not given) ..
Ministry of Internal Affairs of the Russian Federation with the requirements of the order of the Ministry of Internal Affairs of Russia dated 12.04.1994 No. 118 "On Approval of the Instruction on. 29 Appendix No. 25 to the order of the Ministry of Internal Affairs of Russia dated January 12, 2009 No. 13.

hoztovari.weebly.com.

Order 13 from the Ministry of Internal Affairs of Russia Instruction

The immediate performer 6 is personally responsible for complying with the requirements of the Federal Law and Instructions.

Order 13 From Instructions Download - Beanturbabit

667. According to the results of consideration of the appeal, including those obtained during the reception of citizens, an official authorized to sign an answer, it must be defined as:

Order of the Ministry of Internal Affairs 13 from instructions with applications

Russian Federation for permanent storage and. On approval of the instruction. Ministry of Internal Affairs of Russia. 6. 56. On approval of the instruction. The Ministry of Internal Affairs of Russia is spare. On approval of the instruction.

Order of the Ministry of Internal Affairs 13 from the instruction download

Plan - Abstract. St. Petersburg. A. E. Morozov. _____________ 7. The topic of classes. Accounting, storage, procedure for issuing (reception). ATS of the Russian Federation "The purpose of the lecture. MIA RF accounting. Storage and conservation of weapons and ammunition. Date. Conduct: 5.

768. On the treatment to be controlled, the internal affairs organ stamp is affixed - the control entity with the word control and indication of the execution date (Appendix N 7 to the instruction).

Provide objective, comprehensive and timely consideration of the appeal, if necessary, with the participation of a citizen.

689. In the absence of officials appointed for admission, in connection with circumstances that have an exceptional nature, a citizen is proposed to replace a competent official or reception time is transferred, but not more than three weekly working days without changing the reception schedule (except for business cases , disease and holidays of officials assigned to admission).

689. Filled personal reception cards on the same day are transmitted to the subdivision of the office production (in the absence of a permanent receiving).

In the territorial bodies in the district, interregional, regional and district levels, as well as in other bodies of the internal affairs:

778. The heads of the internal affairs bodies in the official tasks of employees sent to conduct inspection, control and targeted checks should be planned to study consideration.

Order of the Ministry of Internal Affairs of the Russian Federation dated April 12, 1999 N 288 "On measures to implement the Decree of the Government of the Russian Federation dated July 21, 1998 N 814" (with changes and additions) Order of the Ministry of Internal Affairs of the Russian Federation of April 12, 1999 N 288 "On Measures Implementation of the Decree of the Government of the Russian Federation of July 21, 1998 N 814 "C [...]

Is it possible to get a property deduction for a minor child? Ivanov I.I., His wife Ivanova A.A. And their minor children acquired a house in 2015 worth 9 million rubles. In total share ownership (1/4 share in the right of ownership of everyone). Each of the owners of 1/4 of the share is entitled to count on deduction in [...]

Article 30. Features of the application of this Federal Law 1. Prior to approval by state regulation authorities of the financial accounting of the federal and industry standards provided for by this Federal Law, the rules for conducting accounting and accounting reporting are applied, [...]

Federal Law of 29.02.2012 N 15-FZ "On Amendments to Certain Legislative Acts of the Russian Federation in terms of providing the living rooms of orphans and children who remained without parental care" On Amendments to Selected Legislative Acts of the Russian Federation in terms of provision of residents [ ...]

Decree of the Government of the Russian Federation of February 20, 2004 N 96 "On the Consolidated Register of Organizations of the Defense and Industrial Complex" (with changes and additions) Demand of the Government of the Russian Federation of February 20, 2004 N 96 "On the Consolidated Register of Organizations of the Defense and Industrial Complex" and additions from: November 8 [...]

Federal Law of May 2, 2006 N 59-FZ "On the procedure for considering the appeals of citizens of the Russian Federation" (with changes and additions) Federal Law of May 2, 2006 N 59-FZ "On the procedure for considering the appeals of citizens of the Russian Federation" with changes and additions from: June 29, July 27, 2010, May 7, July 2 [...]

Ministry of Internal Affairs of the Russian Federation

Annex to Order No. 288

"On measures to implement the Decree of the Government of the Russian Federation of July 21, 1998 N 814"

Instructions for organizing the work of the internal affairs bodies for monitoring the turnover of civil and official weapons and cartridges for it in the territory of the Russian Federation

XX. Requirements for the placement of weapons, equipment of armory, storage facilities, warehouses, premises for display, demonstrations or trade of weapons, shooting tires and shooting

162. Citizens of the Russian Federation must keep their weapons and cartridges at the place of residence in the castle of safes or metal cabinets, drawers from high-strength materials or in wooden boxes, with iron compliance with conditions that ensure the safety of weapons and cartridges, the safety of their storage and excluding access to unauthorized persons.

163. Weapons must be kept by legal entities in safes, cabinets, pyramids and boxes installed in specially equipped rooms, in a discharged state, with a slosen chicken, supplied to the fuse, clean and lubricated, separately from cartridges.

On weapons, enshrined behind employees of legal entities, in a safe, wardrobe, pyramid, or drawers are attached tags, indicating the species, models and numbers of weapons according to the inventory and books of license number accounting and consolidation of weapons.

164. In weapons, legal entities with special statutory tasks, together with weapons, it is allowed to store cartridges in the pads, stores, removable drums or lobs.

Weapons in the factory packaging (boxes, boxes) and cartridges in capping (zinc, cinches boxes) can be stored on racks.

Rosych's cartridges are stored only in metal boxes closed into two locks, different in secret.

165. In individual safes, metal cabinets, pyramids and drawers, separate storage is carried out:

A) cartridges and weapons (except in cases specified in paragraph 164 of this Instruction). In this case, the cartridges containing pyrotechnic compositions are either equipped with tear and irritating substances, as well as cartridges, which have been drying, are stored in a separate packaging;

B) artistic and decorated weapons of all kinds containing precious metals or precious stones;

C) seized weapons and adopted for temporary storage from citizens or employees of other legal entities, as well as the specified weapons and on the balance sheet;

D) powder, packaged in special hermetic metal capping (box), and powder, packaged in polyethylene packets for retailers.

166. Metal cabinets and storage boxes of weapons must close on the castle and have a thickness of at least 2 mm, for storing powder, cartridges and products containing pyrotechnic charge or pyrotechnic rigging equipment - at least 3 mm, and used for transportation of weapons by air transport - not less than 1.6 mm.

167. Safes, cabinets, pyramids, drawers and racks are placed in rooms no closer than 1.5 m from the entrance doors and 0.5 m from window openings, and drawers with cartridges and aerosol packages - no closer to 1 m from heating devices. The distance to the safes, cabinets and pyramids should provide the possibility of unhindered opening of their doors.

168. For each safe, a pyramid, a wardrobe and a box of an inventory, which indicates the types of stored weapons, its number and numbers, and the tag is attached with the name and ordinal number according to the design of the room, the name of the unit (legal entity), in which There is a weapon, as well as the names and initials of the person responsible for the safety of weapons, and the number of its printing or the impulses of the seal.

The above inventories are signed by responsible persons and are specified as changes in them.

169. Weapon storage rooms and cartridges must comply with the following requirements of their technical reinforcement:

169.1. Walls, partitions, ceiling and floor of the premises must be capital: brick or stone masonry thickness of at least 360 mm, concrete wall blocks with a thickness of at least 200 mm, concrete blocks in two layers, each thickness of at least 90 mm, reinforced concrete panels thickness of at least 180 mm.

The elements of the structure that do not meet the specified requirements are closed with a steel lattice, the rods of which should have a diameter or a width in a cross section of less than 16 mm, and the size of the cells is no more than 150x150 mm.

When the inner wall is erected, their execution of not less than 80 mm thick is allowed from paired gypsum concrete panels, each with the specified metal grille between them.

To enhance the walls, the use of other special materials is allowed, which are not inferior to the technical characteristics of the specified constructions according to the conclusions of the expert and forensic division of the internal affairs body or the State University of NGOs "Special Technique and Communications" of the Ministry of Internal Affairs of Russia.

The implementation of these requirements for the technical strengthening of the storage of weapons or cartridges is drawn up with an act of hidden work.

169.2. Ventilation hatches, holes in the walls intended for engineering networks are closed with a steel bars with a diameter with a diameter of at least 16 mm with a cell size of no more than 50x50 mm.

169.3. Door openings are equipped:

A solid steel door with a thickness of at least 3 mm, reinforced around the perimeter and diagonals with a steel profile of the wall thickness of at least 3 mm and the width of the shelves (sides) at least 50 mm;

The lattice door of the rod with a diameter of at least 16 mm with the size of the cells is not more than 150x150 mm, which is also welded around the perimeter and diagonals;

The steel box of the profile with a thickness of the walls of at least 5 mm and the width of the shelves is at least 100 mm.

169.4. The above metal grids in each place of intersection of rods and compounds with profiles are copered, and the ends of the door openings are closed into the walls of 80 mm and cemented.

169.5. The entrance and lattice doors must have internal locks, different in secret, reliable fastenings and loop devices.

Rigels of locks or locking devices on the cross-sectional area should be at least 3 cm2.

The entrance door is additionally equipped with devices for sealing, as well as steel eyenecks with a thickness of at least 3 mm for locking outside by mounted lock or by the second internal lock.

169.6. The weapon storage room should be equipped with fire extinguishing equipment for the standards established by the State Fire Office of the EMERCOM of Russia, and the multi-power security and fire alarms (at least two frontiers). All borders of the fire alarm system are connected to the console of centralized observation of the private security unit under the body of the Russian Federation. Protection mode - round the clock.

Wiring alarm is made in hidden design.

If it is impossible for the technical reasons for connecting the room under centralized security, it is equipped with autonomous alarm with the installation of sound and light alarms near the protection of protection (with round-the-clock protection) or on the outside of the building.

The power supply system of alarm must have a duplicate power source that automatically operates when the main electrical error is disconnected.

169.7. For receiving and issuing weapons in the room wall or in the inlet door, windows with an internal metal door with a thickness of at least 3 mm are allowed, locked from the inside to the lock.

The window frame in the wall is made of a steel profile with a thickness of the walls of at least 5 mm and the shelves width of at least 100 mm, the size of which should not exceed 300x200 mm.

170. Storage of weapons and cartridges by legal entities that are not related to their use, as well as over established storage standards in armory rooms (more than 500 units of weapons or 15 thousand patrons) are carried out in warehouses equipped in accordance with the requirements of this Instruction.

Warehouses are placed, as a rule, in separate non-residential buildings, and underground structures or ground structures with embankment to the roof level are equipped for storage of cartridges. Examination of settlements for the construction (reconstruction) of such structures is carried out on the instructions of the Ministry of Internal Affairs of Russia with government specialized organizations.

Walls, ceiling and floor warehouses must comply with the requirements established for weapons.

The rooms are equipped with the main and spare gates, as well as additional metal grilles closed on the castle. The gate must be metal or wooden, upholstered outside and with the ends with an iron thickness of at least 2 mm, have reliable fastenings of loops, internal constipation and clamps (top and bottom). Metal grilles are made of a rod with a thickness of at least 16 mm. Entrance gates and grilles can have built-in doors equipped with the observance of the above requirements.

The gate, grilles and entrance doors are enhanced around the perimeter and diagonals by a steel profile of the wall thickness of at least 5 mm and the shelves width of at least 100 mm.

Window openings are closed with metal gratings made of a rod with a diameter or a cross-sectional width of at least 16 mm with cells of no more than 150x150 mm or an area of \u200b\u200bno more than 150 cm2 in the manufacture of curly cells.

The bases of the gate and metal lattices are close to a depth of at least 80 mm and cemented.

In storage facilities are equipped with isolated places for recipients (servers) of weapons and cartridges, persons responsible for the safety of weapons and cartridges, storing the allowed accounting documentation and sealing means (sealing).

In the specified locations, the buttons are set to emergency call for police officers or the protection of a legal entity, which can be duplicated by the older (duty) of the daily outfit, the head of Karaula.

The warehouse should have fire extinguishing, specimen, written instructions for persons responsible for the safety of weapons and cartridges, on the procedure for receiving and putting premises and checking the security and fire alarm.

171. Organizations with customs terminals or other warehouses intended for storage of weapons and cartridges represent the project documentation of these structures in the DOP of the Ministry of Internal Affairs of Russia or the GVDT, the URO of the Ministry of Internal Affairs of Russia to verify compliance with the requirements of the Ministry of Internal Affairs of Russia in terms of engineering and technical equipment by means of protection , providing throughput and mode inside the object, as well as requirements for placing weapons and cartridges in their storage places.

172. Weapon storage (more than 15 thousand units) and cartridges (more than 50 thousand pieces) is carried out in warehouses equipped with regard to the requirements established for the production of weapons or cartridges.

173. The storage of collecting weapons and cartridges is carried out by legal entities in the commercials or in other premises equipped with the requirements established for armory rooms, as well as the Ministry of Culture of Russia for weapons and cartridges included in the Museum Fund of the Russian Federation.

174. When exposing weapons and cartridges at exhibitions, their demonstrations in trade halls and in the process of activities carried out on solutions of federal executive bodies or executive authorities of the constituent entities of the Russian Federation, weapons and cartridges are placed in closed display cases (stands) equipped with alarm.

Showcases should be sealed (seal) by a person responsible for the safety of weapons (the keeper of the museum).

In cases where the premises for exhibitions and demonstration of weapons have the technical strength provided for by this Instruction for places of weapon storage, it is allowed around the clock storage in closed shop windows.

175. Firearm, pneumatic and gas weapons can be exhibited at open stands during commercial exhibitions or when demonstrating weapons in trading races during the working day. At the same time, each sample of weapons is fixed to the stand substrate with a lock, excluding the possibility of its free removal from the stand, and is equipped with individual alarm.

After the exhibition is closed or upon completion of the demonstration, the weapon placed on open stands is minted daily for storage in armory.

On each showcase and the bench, the sequence number according to the placement of the room, as well as the inventory number.

176. In each place of storage of weapons and cartridges, an inventory is highlighted indicating the number of safes placed in them, cabinets, pyramids, boxes and racks, their sequence and inventory rooms, as well as seals and print numbers, which they are sealed.

Finds of safes, cabinets, pyramids, boxes and shelving labels are signed by persons responsible for the safety of weapons, and are specified by them by making changes in them.

At the entrance door of the place of storage of weapons and cartridges, the tag is attached with the name and initials of the person responsible for the safety and fire condition of the room.

177. In the case of storage in one place of weapons, several divisions of the legal entity by order of the head appointed responsible for the safety of weapons in the room.

At the same time, the weapons of units should be stored in safes, cabinets, pyramids and drawers separately and seal (seal) by persons responsible for the safety of weapons in each unit.

178. In legal entities with special statutory tasks, the first set of keys from the place of storage of weapons, safes, wardrobes, pyramids and boxes should be kept by the person responsible for the safety of weapons, and the second is the leader of the legal entity.

In the case of imposing the order of the head of the organization of responsibilities for issuing weapons to the head of the guard or shift, duty in the security unit, the second set of keys is stored in these individuals and is transmitted at the end of the duty to the painting in the reception book and duty.

The procedure for the storage and use of the second set of keys in other organizations is determined by the order of the head of the legal entity in agreement with the internal affairs authority.

179. Operation of tires, small-standing complexes and shooting ranges are permitted after equipment for the seats of the archery and storage of weapons (cartridges) in accordance with the requirements of this Instruction, as well as receiving in the internal affairs authorities for the use of weapons on the existing Rifle object.

Legal entities engaged in the production of weapons or cartridges carry out the operation of production rifle structures on the basis of licenses for production.

180. Indoor (closed) tires must have bulletproof walls and ceiling, semi-open tiirs - bulletproof walls and transverse interceptions on top, and open diys - pipped and lateral earth shafts, the necessary security zones with an external perimeter.

181. Indoor, semi-open and open dies are equipped with polelifiers for firing from the corresponding types of firearms with a rifle barrel.

Rifle-standing complexes for shooting from smooth-bore firearms should have security zones with an external fence around the perimeter, eliminating the defeat of any objects outside of this area.

The shooting is equipped in the manner prescribed for open testers, can be designed for a large number of shooting participants and have different distances.

182. Equipment of open tires intended for shooting from small-caliber weapons are eliminated, closer than 2 km from the settlements, and the tires for firing from weapons by a caliber of more than 5.6 mm - 6 km. Semi-open tiirs do not stay closer than 300 meters from residential and public buildings.

183. The Rifle Gallery and the Armory, if they are in the same building, are separated from auxiliary premises (training classes, recreation rooms, trainers and economic premises) with steel lattice partitions. In these partitions, lattice doors are equipped, which must constantly be closed on the castle. Partitions are made of steel rod with a diameter of at least 16 mm. The rods of lattice partitions are welded in each crosshair, forming a cell size no more than 150x150 mm. The ends of the rods of the lattices are close to the wall, the ceiling, the floor to a depth of at least 80 mm and poured with concrete (cemented).

184. It is not allowed to store firearms in the shooting gallery of the tires during a break between the shooting, as well as leaving weapons and cartridges on a fire line without supervision.

185. Instructions for the bandwidth and input regime are developed for each tire, small-standing complex and shooting, taking into account the characteristics of a protected facility, is approved by the head of the organization and is agreed with the relevant internal affairs bodies.

The bandwidth on the object should include the establishment of the order of the entrance and exit, the introduction, carrying (exportation) of weapons, cartridges and other material values.

The input mode includes measures that ensure compliance with the internal routine of the rifle object (workers' time mode, the procedure for issuing and putting weapons, cartridges, maintaining permanent and one-time skips).

In order to provide bandwidth and intra-looped modes, the entrance doors in the rifle shooting gallery (rifle gallery) are equipped with reliable constipation, electric liquefit and eye (video surveillance).

Skipping on the rifle object of workers, shooters and citizens should be made through the checkpoint, which must be equipped with the necessary storage boxes for storing keys and documentation, stands with samples of skips, instructions, schedules in sections and so on.

186. The suitability of the tire, the small-standing complex and the shooting range for operation is determined by the Commission As part of employees of the licensing and permitting work of the internal affairs bodies with the involvement of specialists of state firefighter, sanitary and epidemiological and architectural supervisors, as well as the head of the organization.

187. Permission to use weapons on the corresponding shooting facility is issued on the basis of the petition of the head of the legal entity with the description of its location. The petition also indicates information about the responsible person (surname, name, patronymic, year of birth, place of birth, place of residence). A list of persons with access to weapons and cartridges is attached to it, information about the protection of premises, buildings or structures, where they will be stored.

An open-style scheme, a small-standing complex, shooting, a description of the equipment, and the conclusion of the Commission on the suitability of them are attached to the petition.

Ministry of Internal Affairs of the Russian Federation

Annex to Order No. 288

"On measures to implement the Decree of the Government of the Russian Federation of July 21, 1998 N 814"

Instructions for organizing the work of the internal affairs bodies for monitoring the turnover of civil and official weapons and cartridges for it in the territory of the Russian Federation

XIX. The procedure for conducting an inventory of weapons and cartridges by legal entities

147. Inventory - a complete check of the presence of weapons and cartridges for compliance with accounting data, the procedure for maintaining their accounting and maintenance of safety is carried out in organizations and institutions on the basis of the order of the head of a legal entity or in accordance with the instructions of the heads of the relevant internal affairs bodies.

By order of the head of the legal entity 10 days before the inventory, the Chairman and members of the Inventory Commission are appointed, the timing of its work and the procedure for submitting an inventory acts, accurate statements about the inventory.

Inventory of weapons and cartridges issued by the internal affairs bodies for temporary use is made in accordance with the procedure established by the Ministry of Internal Affairs of Russia for this category of weapons and cartridges.

148. Inventory are held:

B) when changing the person responsible for the safety of weapons and cartridges, or the leader of the legal entity (on the day of receiving and transmission of cases);

C) in the event of a natural disaster, fire, accidents, or other emergencies, as a result of which weapons or cartridges were moved (for a specific participant in such events);

D) in the liquidation or reorganization of a legal entity (including the transformation of the state, municipal unitary enterprise) before drawing up liquidation or separation balances.

149. For an inventory within one year, a permanent inventory commission of at least three people is created in the organization. The inventory commission includes one of the leaders of a legal entity, accounting workers and other specialists who have studied the wellness and nomenclature of the proven weapons, as well as safety measures when handling it.

The composition of the inventory commission, as a rule, should not be changed until the expiration of the commission. In exceptional cases, the replacement of members of the Commission is made on the basis of the order of the head of the legal entity.

The head of the Organization should create conditions for carrying out the inventory of weapons and cartridges, to release members of the Commission at the time of its execution by them of other duties, as well as to allocate the necessary number of technical workers admitted to work with weapons and cartridges.

150. The persons responsible for the safety of weapons and cartridges carry out all the completed operations on the movement of weapons and cartridges and remove their remnants in the accounting books with the assurances of their own signature on the day of the inventory.

151. Before starting inventory, members of the Commission should:

A) to explore the requirements of legislative and other regulatory legal acts of the Russian Federation, regulatory legal acts of the Ministry of Internal Affairs of Russia, regulating the procedure for turnover of weapons and cartridges and their inventory;

B) prepare forms of inventory describing, describing the number accounting and accual statements of the results of inventory of weapons and cartridges, register them in the prescribed manner. At the same time, the preliminary introduction of weapons and cartridges into these documents is not allowed;

C) Check the presence of filling and sealing facilities, whose details should differ from the filling means available in persons responsible for the safety of weapons.

152. Checking the actual presence of weapons and cartridges should begin by the Commission with checking the places of storage of weapons and cartridges and sealing existing safes, cabinets, pyramids, boxes with weapons and cartridges.

Opening and re-sealing proven places of weapon storage for its reception or issuing is carried out only by members of the inventory commission.

153. The presence of weapons is set through the mandatory piece, complete and license plate, as well as checking the compliance of weapons of technical documentation (passports, formulas or their duplicates) in the presence of a person responsible for its safety.

Checks for cartridges packed in sealed packaging or metal circles are carried out by inspecting the integrity of the container according to the applied marking, which corresponds to the inventory inventory inventory. In the absence of labeling (including partial), the specified packages are subject to autopsy, and the cartridges are a magnificent recalculation.

In proven safes, cabinets, pyramids, boxes and capping by the commission are invested by labels certified by the Chairman of the Commission, indicating the date of verification.

154. Collectable and exposed weapons and cartridges from the Museum Fund of the Russian Federation are entered into inventory inventory, taking into account the requirements established by the Ministry of Culture of Russia.

155. Inventory inventory and issues of license records are filled with regard to the requirements established for inventories in the internal affairs bodies. Corrections and additions are certified by members of the Inventory Commission and persons responsible for the safety of weapons and cartridges.

Options are primary inventory documents that are filled directly in places (at objects) of weapons storage and cartridges as they are verified. Upon completion of the inspection, each completed page describes signed by members of the Commission and the person responsible for the safety of weapons or cartridges.

156. Weapons and cartridges entered in the inventory process are recorded in separate inventories.. At the same time, a recording "Weapon (cartridges) received during inventory" is made in the row to indicate the purpose of the weapon, and in the Count "Note" indicates from whom it has arrived, the date of receipt and numbers of the arrival (accompanying, transport) documents.

157. Weapons and cartridges that were at the time of the inventory of employees of the organization, declining a business trip, are taken to test for accounting documents. At the same time, the Count "Note" indicates the date of issuance, surnames and initials of persons who received them and the grounds for issuing.

158. The results of the inventory of weapons and cartridges are reflected in the accurate statement, which is filled in three copies. Each certificate is signed by the Chairman and members of the Commission, as well as the person responsible for the safety of proven weapons or cartridges.

159. When identifying the facts of shortage or excessive weapons and cartridges, an inventory commission promptly reports this to the head of the legal entity.

160. According to the results of the inventory, the Commission is an act in two copies, and on weapons and cartridges issued by the internal affairs bodies for temporary use - in three copies.

The act reflects the state of storage, accounting of weapons and cartridges, the facts of shortage, excessive, damage and loss, as well as proposals to eliminate the identified deficiencies.

The act is considered and approved by the head of a legal entity for a three-day period from the date of its signature and submission by the Commission.

161. The first copies of the act, inventory inventory, inventory of license order, accurate statement and other materials are stored in a separate accounting case at the person responsible for the safety of weapons in the organization, the second - are transferred to the body of the internal affairs, third specimens - in the economic unit of the regional authority of the internal Affairs, internal affairs authorities, subordinate guvdt or uro of the Ministry of Internal Affairs of Russia, which weapons and cartridges are issued for temporary use.

The rules of the turnover of civil and official weapons and cartridges to it in the Russian Federation approved by the Decree of the Government of the Russian Federation of July 21, 1998 N 814.

Citizens of the Russian Federation, having weapons and cartridges on legal grounds, can be stored in place of temporary stay in compliance with conditions that ensure their safety.

163. Weapons should be kept by legal entities in safes, cabinets, pyramids, racks and boxes installed in specially equipped rooms, in a discharged state, with a slosen chicken, put on a fuse, clean and lubricated, separately from cartridges.

On weapons assigned to employees of legal entities, in a safe, wardrobe, pyramid, rack or box tags with species, models and numbers of weapons according to the specimity and book number booking book and consolidation of weapons.

164. In weapons, legal entities with special statutory tasks, together with weapons, it is allowed to store cartridges in the pads, stores, removable drums or lobs.

Weapons in the factory packaging (boxes, boxes) and cartridges in capping (zinc, cinches boxes) can be stored on racks.

Rosych's cartridges are stored only in metal boxes closed into two locks, different in secret.

165. In individual safes, metal cabinets, pyramids, racks and drawers, separate storage is carried out:

B) artistic weapons of all kinds containing precious metals or precious stones;

C) seized weapons and adopted for temporary storage from citizens or employees of other legal entities, as well as the specified weapons and on the balance sheet;

D) powder, packaged in special hermetic metal capping (box), and powder, packaged in polyethylene packets for retailers.

166. Metal cabinets and storage boxes of weapons must be closed on the lock and have a thickness of at least 2 mm, for storing powder, cartridges and products containing pyrotechnic charge or pyrotechnic equipment, not less than 3 mm, and used for transportation of weapons by air transport - not less than 1.6 mm.

168. For each safe, a pyramid, a wardrobe, a rack and a box, an inventory, which indicates the types of stored weapons, its number and rooms, and the tag is attached, indicating the name and ordinal number according to the placement of the room, the name of the unit (legal entity), in The use of which is a weapon, as well as the names and initials of the person responsible for the safety of weapons, and the numbers of its printing or impulses of the seal.

The above inventories are signed by responsible persons and are specified as changes in them.

169. Weapon storage rooms and / or cartridges (weapons) must comply with the following requirements of their technical reinforcement:

The elements of the structure that do not meet the specified requirements are closed with a steel grille, the rods of which should have a diameter or a width in a cross section of at least 16 mm, and the size of the cells is no more than 150 x 150 mm.

When the inner wall is erected, their execution of not less than 80 mm thick is allowed from paired gypsum concrete panels, each with the specified metal grille between them.

The implementation of these requirements for the technical strengthening of the storage of weapons or cartridges is drawn up with an act of hidden work.

169.2. Ventilation hatches, holes in the walls intended for engineering networks are closed with a steel bars with a diameter of at least 16 mm with a cell size of no more than 50 x 50 mm.

169.3. Door openings are equipped:

The lattice door of the rod with a diameter of at least 16 mm with the cell size of no more than 150 x 150 mm, which is also welded around the perimeter and diagonals;

The steel box of the profile with a thickness of the walls of at least 5 mm and the width of the shelves is at least 100 mm.

169.4. The above metal grids in each place of intersection of rods and compounds with profiles are copered, and the ends of the door openings are closed into the walls of 80 mm and cemented.

169.5. The input and lattice doors must have internal locks, different in secret, reliable fastening and loop devices.

Rigels of locks or locking devices on the cross-sectional area should be at least 3 cm2.

The entrance door is additionally equipped with devices for sealing, as well as steel eyenecks with a thickness of at least 3 mm for locking outside by mounted lock or by the second internal lock.

169.6. The weapon storage room should be equipped with fire extinguishing equipment for the standards established by the State Fire Office of the EMERCOM of Russia, and the multi-power security and fire alarms (at least two frontiers). All borders of the fire alarm system are connected to the console of centralized observation of the private security unit under the internal affairs body of the Russian Federation, in order to implement the internal affairs bodies of control functions.

Wiring alarm outside the weapon room is made in hidden execution.

The system of power supply alarm must have a duplicate power source that automatically triggers when the main power grid is disconnected.

The fire alarm system can also be connected to the protection of organizations (separate security units, posts) engaged in legal grounds for security activities at facilities where weapons are placed and (or) cartridges.

Throughput mode and modes within the indicated objects with armed firearms by guards used by technical protection techniques should ensure the safety of weapons and cartridges, the safety of their storage, eliminating access to unauthorized persons during the storage, issuance, reception, charging, discharge, maintenance, and conduct control - check events.

At the facilities of organizations where only civilian pneumatic, throwing and (or) cold weapons are placed, to be registered in the internal affairs bodies, intra-loose modes are allowed using technical means and throughput, and in rooms with other civil arms, the acquisition of which citizens are carried out without Licenses of the internal affairs bodies - with the help of technical means.

169.7. For receiving and issuing weapons in the room wall or in the inlet door, windows with an internal metal door with a thickness of at least 3 mm are allowed, locked from the inside to the lock.

The window frame in the wall is made of a steel profile with a thickness of the walls of at least 5 mm and the shelves width of at least 100 mm, the size of which should not exceed 300 x 200 mm.

170. For legal entities (trade, sports organizations and educational institutions), the limiting volumes (number) of storage of cartridges in one room (armory or warehouse) on the basis of the positive results of the survey are determined by the Commission, based on the requirements of fire safety, taking into account the free volume of safes, Metal cabinets, racks and pyramids located in a weapon room or storage room. Armory rooms are equipped in accordance with the requirements of paragraph 169 of this Instruction. Storage of cartridges in weapons rooms in other legal entities is carried out in the volumes established for them by charts by charters.

Paragraph has lost strength. - Order of the Ministry of Internal Affairs of Russia dated December 30, 2014 N 1149.

Walls, ceiling and floor warehouses must comply with the requirements established for weapons.

Warehouses are equipped with the main and spare gates, as well as additional metal lattices closed on the castle. The gate must be metallic, have internal constipation and clamps (top and bottom). Metal grilles are made of a rod with a diameter of at least 16 mm. The gate, grilles and entrance doors are enhanced around the perimeter and diagonals by a steel profile of the wall thickness of at least 5 mm and the shelves width of at least 100 mm.

Window openings are closed with metal grids made of a rod with a diameter or a cross-sectional width of at least 16 mm with cells with a size of no more than 150 x 150 mm or an area of \u200b\u200bno more than 150 cm2 in the manufacture of curly cells.

In warehouses, buttons are installed for emergency call for police officers or legal entities.

171. Organizations with customs terminals or other warehouses intended for storage of weapons and cartridges represent the project documentation of these structures into the territorial bodies of the Ministry of Internal Affairs of Russia at the regional level to verify for compliance with the requirements of the Ministry of Internal Affairs of Russia in terms of engineering and technical equipment by means of protection, ensuring The throughput mode and mode inside the object, as well as the requirements for placing weapons and cartridges in their storage places.

172. Storage of cartridges by legal entities engaged in the production of weapons and (or) cartridges is carried out in warehouses equipped with regard to the requirements established for the production of weapons or cartridges.

Showcases should be sealed (seal) by a person responsible for the safety of weapons (the keeper of the museum).

After the exhibition is closed or upon completion of the demonstration, the weapon placed on open stands is minted daily for storage in armory.

Each showcase and the stand applies the sequence number according to the placement of the room, as well as the inventory number.

Finds of safes, cabinets, pyramids, boxes and shelving labels are signed by persons responsible for the safety of weapons, and are specified by them by making changes in them.

At the entrance door of the storage space of weapons and cartridges, the tag is attached with the name of the surname and initials of the person responsible for the safety and fire condition of the room.

177. In the case of storage in one place of weapons, several divisions of the legal entity by order of the head appointed responsible for the safety of weapons in the room.

At the same time, the weapons of units should be stored in safes, cabinets, pyramids and drawers separately and seal (seal) by persons responsible for the safety of weapons in each unit.

In the case of storage in one room (armory or warehouse) of weapons and / or cartridges of several legal entities (sports organizations and educational institutions), the joint order of the managers of these organizations is appointed responsible for the safety of weapons and (or) cartridges in such a room.

With such a joint storage of different legal entities in one place, weapons and (or), the cartridges are placed in separate safes, cabinets, pyramids, racks or metal boxes and seal (seal) by a person responsible for the safety of weapons in this room and the persons responsible for the safety Weapons in each of these legal entities.

In the case of laying down by order of the head of the organization of responsibilities for the issuance of weapons to the head of the guard or shift, the second set of keys is stored in the security unit, the second set of keys is stored in the indicated persons and is transmitted at the end of the duty on the painting in the book of reception and duty.

The procedure for the storage and use of the second set of keys in other organizations is determined by the order of the head of the legal entity in agreement with the internal affairs authority.

179. Permissions for storing and using weapons on a small facility are issued by the internal affairs bodies to legal entities, in the structure of which there are shoots, short-standing complexes and shooting, after the equipment of the seats of shooting.

180. Indoor shootings, with the exception of 4.5 mm caliber, intended for fire arms and less, should have bulletproof walls and ceiling.

Semi-open tires, taking into account the above exceptions, should have bulletproof walls, transverse interceptions on top in the fire zone and intercepting-canopy over the firebroke. Walls, chasters-interceptions and transverse interception of semi-open tires should exclude direct departure bullets of firearms outside the database.

Open tires (shooting) should have pupil (protective) shafts in the main direction of firing (targeted zone), excluding the defeat of people behind them, and the necessary security zones with an external fence around the perimeter.

The dimensions of the safety zones of open tires (shooting) can decrease with the topographic (landscape and relief) features of the terrain and the applied tools for protection, including the structures of the Polelifiers used, protective shields, side earth shafts, including reduced noise levels, reversal (ricochet) bullets and Their fragments that ensure the safe operation of rifle objects. According to the results of a technical examination for open testers (shooting), decisions may be made by the relevant commission on the absence of security zones if the bullet departure beyond the rifle object is excluded by the protection tools.

Rifle-standing complexes for firing by shot cartridges from firearm smooth-bore long-barreled weapons must have a fencing of a rifle object. This fencing in the directions and sectors of the shooting in accordance with the plan-scheme of the specified object is set at a distance of at least 120 meters from the fire line (when shooting a shot N 7 - N 9) and eliminates the direct contact of the shot charge in people and in any objects for Its limits.

181. Indoor, semi-open, open shoots (shooting) and small-standing complexes must comply with the requirements for technical strengthening and security established in this Instruction.

182. Depending on the characteristics of the weapon, for the shooting of which open shooting (shooting) are intended, their equipment is excluded in the following distances from settlements:

From firearm smooth-bore long-life weapons - less than 1 km from the fireproof when using bullet cartridge;

From a firearm long-baulous weapon with a rifled trunk under the cartridge of a central battle of caliber to 5.6 mm (inclusive) - less than 2 km from the fireproof, and sports firearms with a rowed trunk under the cartridge of ring ignition (lateral combat) of the caliber of 5.6 mm - less 1 km from the fire lope;

From firearm long-tested weapons with rolling trunk of caliber up to 11.43 mm inclusive - less than 6 km from the fire lope;

From pistols and revolvers (with the exception of firearms of limited lesions, gas and signal weapons) caliber up to 11.43 mm inclusive - less than 1 km from the fire lope.

183. The Rifle Gallery and the Armory, if they are in the same building, are separated from auxiliary premises (training classes, recreation rooms, trainers and economic premises) with steel lattice partitions. In these partitions, lattice doors are equipped, which must constantly be closed on the castle. Partitions are made of steel rod with a diameter of at least 16 mm. The rods of the lattice partitions are welded in each crosshairs, forming a cell size no more than 150 x 150 mm. The ends of the rods of the lattices are close to the wall, the ceiling, the floor to a depth of at least 80 mm and poured with concrete (cemented).

In rifle galleries it is allowed to install metal safes for temporary storage of weapons during training sessions.

184. It is not allowed to store firearms in the shooting gallery of the tires during a break between the shooting, as well as leaving weapons and cartridges on a fire line without supervision.

The bandwidth on the object should include the establishment of the order of the entrance and exit, the introduction, carrying (exportation) of weapons, cartridges and other material values.

Paragraph is excluded. - Order of the Ministry of Internal Affairs of Russia of 21.05.2012 N 526.

186. The suitability of indoor tires, semi-open tires, open tires (shooting) and small-standing complexes for operation is determined by the Commission as part of the employees of the licensing and permitting work of the internal affairs bodies with the participation of specialists of all-Russian sports federations accredited in accordance with the legislation of the Russian Federation, one by one or several sports associated with the use of sports weapons.

186.1. The size of steel profiles, steel doors and steel rods, of which the elements of the structure of weapons and warehouses are made, indicated in paragraphs 169, 170 and this instruction, are taken taking into account the tolerances for the production of metal rolling.