Laser underbarrel target indicator sight new. Remote laser target indicator Laser targets weapon pointers

A laser pointer is a device that improves the aiming of a weapon and is a detachable design that can be purchased either together with an airgun or separately from it as an additional accessory that allows you to increase the aiming ability.

The sight with the help of a laser pointer allows you to shoot more accurately, while its effectiveness increases significantly. The advantage of an accessory for pneumatic weapons is its reasonable price in relation to high performance and great opportunities for the shooter.

On the Russian market available a large number of LCC for pneumatics, which differ among themselves in the quality of the body, strength and accuracy. Despite this, they all greatly improve the ability of the shooter. Typically, similar designs are purchased for rifles and airguns. In order for the pointer to fit perfectly under any of these, its body has a universal mount.

It is most advisable to use such equipment for a rifle or pistol for novice shooters, since the laser beam makes it possible to see the point of sight and control its movement. The beam is visible both at long and short distances. The use of a sight is used not only by beginners, but also by experienced shooters, for example, for hunting, which makes it possible to accurately determine the target at a great distance.

The structure of the LCC

The laser pointer consists of a body, which is made of metal and strong alloys. After the laser has been completed, it goes through shock testing, which means that when you buy a pointer, you get a high-quality and durable sight system.

In order to direct the laser, the laser sights are equipped with three screws, which allow you to easily and quickly aim pneumatic weapons for yourself. Adjustment of the direction of the laser sight is performed in both horizontal and vertical directions.

The body design at the base has a universal fastener that easily attaches to any barrel that has a dovetail bar. In more rare cases, the laser designator has a different fastener structure. When installing/removing the LCC, the overall setting of the sight is not disturbed.

At the heart of the target designator system, there is one that performs the role of forming a beam directed as a visible point to the place where the bullet will hit. When created in the range from 635 to 670 NM - a red beam. In case the laser designator was created in a complete set with a night light, the LED creates a beam from 780 to 850 NM

The advantage of a laser designator is as follows. The aiming ability of pneumatic weapons is increased by an average of 43%. At the same time, while shooting at close range, the efficiency is 10%. When shooting at night or in difficult vision conditions, the efficiency reaches up to 52%.

Usage: military affairs, in particular devices for indicating the target. The essence of the invention: the source of laser radiation 8 through the modulator 7 of the intensity of the radiation is optically coupled with the scanner 6 of the laser beam. The laser, modulator and scanner are also electrically connected to the control command receiver 5. The receiver 5 is remotely connected via the communication channel 4 to the control command transmitter 3, which is electrically connected to the control command interface 1. The device is powered by power supplies 2, 9. 2 h. P. f-ly, 1 ill.

The invention relates to weapons technology, namely to sights and is intended for remote indication of one or more targets with the priority of the target by projecting a luminous spot onto the target. A known method of aiming with a laser designator for small arms, where the pointer laser is part of the weapon being used. This leads to the fact that target designation and aiming are combined and carried out "manually" by the shooter, only one target is indicated at the time of aiming, and the presence of a laser radiation source on small arms reduces the stealth of firing. This invention solves the problem of improving the efficiency of firing small arms. The technical result achieved by using the invention is to increase the stealth of firing compared to , to reduce the time of target detection by the shooter, to designate the priority of the target, and also additional opportunity division leadership. The technical result is achieved by the fact that the source of laser radiation through the radiation intensity modulator is optically coupled to the laser radiation scanner, the laser source, the modulator and the scanner are also electrically coupled to the receiver of control commands, the receiver is remotely coupled via a communication channel to the transmitter of control commands, the transmitter is electrically coupled to control command interface. The power supply of the device is carried out by power supplies. In addition, the device is not a part of small arms, it separates aiming and target designation, it only performs target designation of one or several targets simultaneously with a priority designation. The drawing shows a block diagram of the device. The device contains a control command interface 1, a control command transmitter 3, a communication channel 4, a control command receiver 5, a laser radiation source 8, a laser radiation modulator 7, a laser beam scanner 6, and power supplies 2, 9. The pointer operates as follows. The interface of control commands 1 perceives the effects of the source of control commands about the place, time and priority of the target, converts these effects into an electrical control signal for the transmitter of control commands 3, the transmitter transmits this information through the communication channel 4 to the receiver of control commands 5, the receiver in accordance with the received information generates electrical control signals for the source of laser radiation 8, which forms a coherent narrow beam of radiation, the modulator 7, which changes the intensity of the laser radiation in time, the scanner 6, which orients the modulated laser beam in space, thereby carrying out target designation, and sets the shape of the light spot, indicating that highest priority goal. The energy supply of the device is carried out from power supplies 2, 9.

CLAIM

1. Laser remote target indicator, containing a source of laser radiation, characterized in that it is equipped with a laser beam scanner, a laser beam modulator, a control command transmitter, a communication channel, a control command receiver and a control command interface, the latter being connected to the control command transmitter, which, in turn, is connected to the control command receiver via a communication channel, and the outputs of the control command receiver are connected to the corresponding inputs of the laser source, scanner and modulator, the laser source being optically connected to the scanner through the modulator. 2. Pointer according to claim 1, characterized in that the scanner is configured to orient the laser beam in space and change the shape of the light spot. 3. Pointer according to claim 1 or 2, characterized in that it is designed to indicate several targets simultaneously.

Portable laser designators are devices that emit a laser beam and form a light spot on the target. Outwardly, they are made in the form of a small cylinder with a power button and a mount for mounting on a gun, crossbow or pistol. There are lasers with a button on the case and with a remote button on a flexible cord, the latter can be fixed in any convenient place.

To learn more

The laser designator can be used both together with the sight, and instead of it when shooting at close range. When used together with a sight, it allows, firstly, more accurate aiming at the target, and secondly, offhand shooting without looking into the eyepiece.

To summarize, there are three reasons to buy a laser pointer:

it reduces aiming time,
facilitates the tracking of a moving target,
increases the accuracy of rapid fire.

Since the laser beam has a straight path, best results can be achieved with underbarrel lasers when firing at close range (up to 50 m), when the ballistic trajectory of the projectile slightly deviates from a straight line.

When attaching a laser designator, it is desirable that its axis be as close as possible to the axis of the weapon barrel. Mounting above or below the barrel is considered optimal, but if other attachments (for example, a lantern) are already installed there, side mounting is also acceptable.

What are modern LCUs

All laser designators for hunting work with the help of semiconductor diodes. Depending on the wavelength, they can be different color:

blue (430-470 nm)- in hunting equipment they are used extremely rarely;
green (532 nm)- well visible sunlight, suitable for shooting on a clear day;
orange (635 nm)- also convenient for daytime hunting and are better visible against the background of trees, shrubs;
red (650-670 nm)- universal, but best seen at night.
infrared (780-850 nm)- designed for use with night sights and other night vision devices; invisible to people and animals, because they work in the IR range.

Thus, before buying a laser pointer, you need to decide in what conditions, at what time of the day the shooting will be carried out. The type of weapon also matters: some models are designed for use with certain types of guns or exclusively with pistols.

We have for sale laser designators for smoothbore weapons - for example, Benelli Raffaello, Remington, Mossberg, etc. Also available are lightweight, compact models for mounting on pneumatics and low-profile laser sights for pistols. Carbine lovers will also find something suitable for themselves - we offer modern laser designators for rifled weapons imported and domestic production.

The online store "Navigator" presents a wide range of laser equipment - LCC and rangefinders with delivery by courier in Moscow and Moscow Region or by mail in Russia. If you wish, you can order goods online with the possibility of self-delivery from our Moscow office.

Do you want to buy an LCC in Moscow at a bargain price? Call!

A compact device that generates laser radiation, is called a laser target designator (abbreviated as LCC). Radiation can be carried out both in the visible and in infrared range. The device is used by shooters for better aiming. Distances are short and medium. The laser pointer can be mounted on firearms and pneumatic weapons, as well as on crossbows.

The basis is the emitter - a laser diode. Its rays pass through a convex lens and turn into one narrow beam. As a rule, it is red (rarely purple) in color. To create a green beam that is more comfortable to the eye and better visible, a special solid-state diode is used, which has a higher cost. Also, the device has a power source and a special mount that allows you to quickly remove and install the LCC while maintaining the exact position.

LCC features, setup and installation in this video:

Pointing the device at the target, the shooter sees a bright red (or green) dot, which provides sniper accuracy (this works best when shooting up to about 50 m). After all, the trajectory of a light beam is identical to the trajectory of a bullet. Moreover, this effect can be used both at night and in the daytime.

Laser pointer for firearms and pneumatics

According to the design of the LCC, there are built-in and removable types. For firearms, removable devices are more used, which, if equipped with a mount, can be installed on any type of rifle or pistol. In addition, the placement of the power button is important here - it is desirable to place it on the handle or forearm. The attachment point for large weapons is usually provided. For short-barreled models, it is usually located under the barrel, in the frame - this is the best and most reliable option. Emitting diodes are most often red, IR radiation is rarely used.

For pneumatics, a laser designator should be as light, reliable and compact as possible. It is often equipped with such diodes that are capable of producing a wide spectrum of radiation (from ordinary to infrared). When hunting, the beam can frighten a bird, so in air weapons it is usually LCC is used at short distances from the target (10-50 m).

When buying, this must be taken into account - after all, sights designed for firearms, are often not suitable for shooting up to 40-50 m. If a spring-piston gun is used, then you need to choose devices with a small lens diameter (up to 40 mm). They are stronger and more reliable, and recoil will not damage them.

LCC in tandem with other devices

With optical sight

The advantage of an optical sight, in contrast to a mechanical one, is the magnification. In this case, the target approaches the shooter, and the chances of missing (even in fog or at dusk) are significantly reduced. If you add a bright dot of the laser pointer here, then it will become even easier to aim. Therefore, some manufacturers produce optical instruments combined with a laser pointer.

Optical sight POSP 4x24 V with LCC-OM - a product from the Tula manufacturer (NPF EST).

The device has a quadruple magnification and a laser beam wavelength of 650 nm, and a light spot size of 25 mm at a range of 25 m.

It weighs 0.62 kg, is powered by two cells (AG-13, LR44 or 357A) with a voltage of 3 volts. Suitable for mounting on a 12 mm weapon with a dovetail rail. There is a reticle illumination device, as well as a parabolic rangefinder scale. Application: sports shooting, hunting, surveillance of the territory. The price is 16 thousand rubles.

With collimator sight

The difference of this device is the ability to observe both open eyes behind the luminous dot that appeared on the target. Having trained, it is possible to shoot more accurately than with the usual "optics". There is a lens with a long focus, where the aiming mark is set. It can glow itself or be illuminated electronically. On a clear day, its brightness should be increased, in the dark - reduced. A mark that does not close the target is very convenient - even beginners show good results. For pneumatics and small-caliber guns, this type of sight is just perfect. You can hunt with it even in the dark, and it is easy to hit a bird in flight.

As an example, consider an open red dot sight ZOS HQ 434, which can be used with a laser pointer, manufactured by the Chinese company ZOS. It is not very expensive (from 4000 rubles) and reliable. The body is completely metal, there is a built-in bracket suitable for a WEAVER or picatinny rail. The weight of the device is 0.115 kg, the length is 8.2 cm. The aiming mark can be switched: it becomes a dot, a dot in a circle, a bold dot or a cross. The brightness is also adjustable - in the range from 0 to 11. The lens is rectangular, 22x33. Power type - lithium battery 3 volts type CR123A. Application: air rifles, small-caliber weapons.

The laser designator is installed on different models of weapons, including air gun. Characteristics and review of the gun in this article, the features of this gun.

You can read everything about an optical sight with a built-in rangefinder. Features of its application.

With Sniper Flashlight

This device, mounted under the barrel of a weapon, combines "two in one": a laser designator and a flashlight. It can work simultaneously in these two modes or separately in each of them. The lamp in the lantern uses a powerful krypton lamp - its luminous flux is 320 lumens. And the LCC has a power of 50 mW, which makes it possible to send a beam to a distance of up to 600 m.

On this video you can see the operation of the laser designator built into the tactical flashlight:

The presence of a tactical remote button facilitates ease of use. Device weight - 0.135 kg, length - 10 cm. Suitable for any type of weapon thanks to the universal mount. Two lithium batteries (type CR123A) power the device. It is made by the Chinese company Bailong. The product is sold at a price of 1600 rubles.

Overview of popular models

Gletcher W-125

This inexpensive laser pointer from the famous American company Gletcher is made of black plastic. It has a universal mount for a WEAVER or picatinny rail and is powered by three LR41 elements. The device is switched on with a convenient double-sided lever. On the side of the case there is a regulator that allows you to adjust the device horizontally.

There is also a vertical adjustment screw. A hexagon is included for adjustment. Application: athletes training, hunting. The device is placed on any weapon where there are appropriate straps. The cost is from 1000 rubles.

Weber 01G

This device differs in that the laser beam is not red (as in most LCCs), but green, with a wavelength of 532 nm. It's better for the eyes, besides, wild animals when hunting, they are not so frightened (after all, from fright, they may experience a blinding effect). The device is made of aluminum, it is waterproof and shockproof. Its weight is 0.25 kg, length is 15 cm.

The beam can be adjusted relative to the barrel horizontally and vertically. The focusing ring also changes the size of the light spot (from 8 to 800 mm). For power, a CR123A type element is used. There are mounts for . Application: aimed shooting from firearms and pneumatic weapons. The manufacturer is Veber (China). Price - 4000 rubles.

Double-beam laser designator IR/R

This device works with two beams: visible red (its wavelength is 650 nm) and invisible infrared (which has a wavelength of 880 nm). To change the beam there is a special toggle switch. In the latter case, you can see the light spot only if armed with

laser pointer

A revolver equipped with a laser target designator.

laser pointer (LCU) - portable device, which generates laser radiation in the visible or infrared range of the spectrum. Used to speed up and facilitate aiming at short and medium shooting distances.

The laser beam forms a bright dot on the target, corresponding to the place where the bullet hit, as if it was moving in a straight line, and not along a ballistic trajectory. As a rule, at firing distances from 50 to 300 meters (depending on the type of weapon), the bullet moves almost in a straight line, which allows, with a fairly small error (including parallax), to equate the location of the luminous point created by the LCC to the point where the bullet hit.

laser pointer often incorrectly referred to as a "laser sight".

In addition to small arms laser pointer can also be mounted on crossbows.

Device

In most cases laser pointer is made on the basis of a laser diode, which emits in the range of 405 nm (violet, very rare) or 635-670 nm (red). Because of technical features of this type of emitter, the red laser beam is most often used. Infrared designators use laser diodes with wavelengths of 780, 808 and 850 nm (such laser designators used in conjunction with special sights, often based on night vision devices). The laser diode radiation is focused into a narrow beam by a biconvex lens. For the production of rays Green colour use a slightly different DPSS system (diode-pumped solid-state laser with a wavelength of 532 nm), which increases mass and cost laser designator(but at the same time it has a serious advantage: the sensitivity of the human eye to green is much better, and with the same emitter power, the green spot can be seen better and farther).

In addition to the laser itself and the power source, laser designator a special mount is included, sometimes allowing you to remove and install the laser sight without losing installation accuracy. It must also maintain the exact position laser designator with changes in temperature and humidity. Usually there is also a mechanism for fine adjustment of the beam (characteristic "rattles", as on optical sights). Another important requirement is laser pointer must withstand the recoil impulse of the weapon for which it is intended.

Use for targeting missiles and bombs

The term can also refer to the part of the laser guidance system that irradiates the target. In this case, as a rule, an infrared laser with modulated radiation is used. Its point is seen by the operator of the weapon through a special electron-optical converter. In addition, a sensor in the head of the rocket or bomb is aimed at this point. In fairness, it should be said that such a device is rarely called a "LCD", since it is already an integral part of the fire control system.