See how to summon a command block. How to give yourself a command block in Minecraft

A command block in Minecraft is a block in which you can enter various commands. After receiving a signal from the red stone, he will begin to fulfill his task. The block greatly expands the possibilities of players and finds many ways to use it in gameplay. Thus, many gamers have a question how to make command block in Minecraft.

Create a command block

Just like that, it is not possible to take and make a command block (from the English “command block”) in Minecraft. However, it can be obtained using special cheats and commands.

Launch a solo game in Maine in creative mode.
In the world settings, enable the use of cheats.
Puzzled by the question of how to make a command to issue a block in Minecraft, you need to open the console.
In the console line, you will need to enter the command: give *player nickname* command_block.

After executing this command, the block will be in the hand of the character of the corresponding player.

You can issue a block to yourself, another player, or the whole group. They cannot be used in survival mode.

How to use the block

The block is widely used in the game, executing various commands.

When the command block is in the character's hands, right-click on the ground to place it. After that, you need to click the same button on the attribute itself.

This will open a command block window where you can enter the required task or change its parameters. Further changes can be made at any convenient time. If something was done incorrectly, then in the same window the user will receive a corresponding notification.

Blocks can be in passive mode, run from chain reaction through similar objects, or triggered by a signal transmitted by a red stone. The command block can also have a direction, according to which you can build a whole chain of blocks that work one after the other.

If desired, the player can set the binding to the block. With this function, you can kill specific entities or everyone in the area, in addition to the player himself. The block can also be configured to interact with other players.

In some situations, the command block can be used to teleport one player or an entire group. To do this, you will need to correctly specify not only the command, but also the coordinates.

In principle, the command block supports a lot of tasks, a complete list of which can be found on numerous Internet resources. You can view the entire list of possible commands directly inside the game by typing /help in the chat window.

Video: How to use a command block in Minecraft.

Command block- an opaque block that cannot be crafted. This block is necessary to activate a variety of commands that are written in the command console.

How to get a command block in minecraft?

To get it, in the chat you need to register the following command without brackets: /give [Your_Nickname] command_block [Desired number of blocks]. For instance, /give Razmik command_block 1. After pressing the Enter button, the command block will appear in your inventory.

How to activate a command block in minecraft?

You can activate the code you entered in the command block thanks to the lever, redstone, redstone torches, or through the button.

Let's analyze the simplest commands that can be used in a command block.

Change in time of day. For example, you want it to be night. To do this, install the block, click on it with LMB and write the following command in the console: /time set night.
Teleportation. For example, you need to teleport to some point on the map. To do this, we go to the selected point, press F3 and remember x,y,z coordinates. Then we go to the command block and write the following command: /tp @p 252 56 -175. The numbers 252 56 -175 are the x,y,z coordinate values.

Commands great amount, the simplest of them are given above.

DISTRIBUTION OF ACCOUNTS / KEYS / BASES / FREE

How to make a command block in minecraft

The command block did not appear in minecraft right away. Only in version 1.4, players have new opportunities. It is in this version of minecraft that users will learn what a command block is, which is closely related to console commands.

What is a command block

Actually, a command block is a block in which players write certain commands. The command block can be opened by clicking on it with the mouse. After that, a field will appear in which the commands for execution are written. Information about the result of the entered commands will be displayed below.

How to make a command block

Unfortunately, it is impossible for an ordinary user to make a command block in minecraft, despite the great desire of the player, because with the help of a command block in the virtual world, you can fully control the map and chat with all players at the same time. You cannot make a command block yourself, you can only get it. There are several options for how to get a command block.

Teams

To receive you need to full list commands that can be written in the command block, just enter the word help in the chat window.

By entering these commands, you will get the desired result:

give @p iron_ingot 10 - 10 iron ingots
setblock 42 21 60 wool - set block at coordinates x=42, y=21, z=60
tp Player 42 21 60 - teleport to a point with coordinates x=42, y=21, z=60

You can also use pointers to players:

@p - nearest player;
@a - all players;
@r - random player;
@e - all entities.
x - X coordinate of the search center;
y - Y coordinate of the search center;
z - Z coordinate of the search center;
r - the maximum value of the search radius;
rm - minimum search radius value;
m - game mode;
l- maximum amount player experience;
lm- minimal amount player's experience.

Today we will talk about what a command block in Minecraft is, how to get it, why it is needed and how, where and for what it can be used.

What are command blocks?

In Game minecraft team block (KB) can automatically perform certain console commands as long as it is activated by a redstone.

They work in adventure mode, and allow map makers to improve the interaction with the player. In this case, the player is not able to destroy blocks and build new ones.

In Survival mode, Command Blocks cannot be interacted with or destroyed.

They cannot be crafted by crafting, and they cannot be found in the inventory when playing in creative mode. Creative mode players and server admins can use the "give" console command to get KB or make it available to other players. It looks like this:

/give minecraft:command_block

When typing a team, remove the brackets around the edges of the player's name and quantity:

/give atombox minecraft:command_block 1

KB has a graphical interface with a text field, accessible by right-clicking the mouse.

Only players in creative mode and players with administrator status on the server can place command blocks, enter commands and save changes.

For their use in single player or multiplayer worlds, you need to enable LAN mode and allow cheats.

Where are command blocks used?

Have you ever played adventure maps where it's always night or where the weather never changes? You could download maps where players receive special rewards, upgrades or experience at the touch of a button or for completing a task. All this is made possible by KB. When creating your Minecraft map, you need command blocks if:

Do you want constant day or night;
Do you want to change the weather;
You want to change the difficulty of the game;
You want to play a certain sound;
You want to send a message to the player;
You want to teleport to another location;
You want to give players items.

There are tons of videos on YouTube describing the various Minecraft maps. Multiplayer maps are especially popular. There are many categories of Minecraft maps available for download that use command blocks to enhance the player experience. There are many reasons for map developers to use them. Among them are cards of the following categories:

Adventure cards;
Parkour cards;
Puzzle cards;
Survival cards;

Adventure cards focused on the plot, and the gamer acts as the protagonist of the story. Previously, adventure maps relied on storytelling through signs and books, but now storytelling is available through dialogue and sounds, all thanks to KB.

Parkour cards force the player to get from one end of the world to the other with a minimum number of deaths. Often they contain incredible jumps and other deadly obstacles. Command blocks make it possible to set the spawn points (appearance) of the character in front of complex obstacles.

Puzzle cards emphasize problem-solving skills by offering mazes, traps, and other challenges. Some of these cards have a story, just like adventure cards. The use of CBs makes it easier for these cards to suggest directions, story-related dialogue, and sounds.

Survival cards may focus on survival in single player or multiplayer, or include a story along the way. KBs can give players a starting point to spawn, as well as plot-related information. The possibilities here are endless.

How to use the command block

Installing them is easier than most Minecraft players think. The commands can be confusing, but some of them (like setting the time of day) are very easy to program. Large projects can be planned later, but first try to master the basics of placing, configuring and using KB.

Don't forget that Command Blocks can only spawn in Creative Game Mode. To go to it, you need the appropriate privileges on the server (if available) or activated cheats.

In the chat box, type "/gamemode c", "/gamemode creative" or "/gamemode 1" without quotes.

2. Clicking on the command block with the right mouse button

In creative mode, right-click on a command block to access it. To generate it, you need to use the "give" command, as described above in the text:

/give minecraft:command_block

Command blocks only work when connected to electrical circuit red stone (by the way, there is good mod, allowing you to increase the distance of energy transfer). Right-clicking opens a dialog box where you can enter a server command. The maximum command length can be 254 characters.

3. Enter the command and click "Finish"

When you enter a command into a block, you need to specify which player it is aimed at. This can be done by entering the player's name or selecting three different variables: "@p" (nearest player), "@r" (random player) or "@a" (all players). These variables are especially useful in situations where the player activating the team is unknown. After setting the command, click "Finish" to save it.

Remember that one KB can execute only one command!

Practical Use Cases

The following examples are simple and practical command block applications in single player and multiplayer in Minecraft worlds.

How to change the rules of the game

The game rules are relatively new feature, which allows players and command blocks to change certain basic Minecraft world settings. There are nine described game rules that can be controlled using the command block on the map.

You can use game rules to create permanent daylight or darkness, disable mob spawning, mob item drops, and more. When entering the "gamerule" command, use the following command:

game rule	The effect of the rule
commandBlockOutput	Enables/disables text input in KB
doDaylightCycle	Enables/disables the day/night cycle
doFireTrick	Enables / disables the spread / disappearance of fire
doMobLoot	Enables / disables the drop of items from mobs
doMobSpawning	Enable/disable mob spawning
doTileDrops	Enables / disables the drop of items from the CB when they are destroyed
keepInventory	Enables / disables saving items in the inventory after the death of the player
mob Griefing	Enables/disables KB destruction by creepers or endermen
naturalRegeneration	Enables/disables health regeneration for players

How to set the weather

Some maps use a dark theme that is perfect for rainy weather or thunder, while others are best played with clear skies. There are many options to control the weather with command blocks. A simple weather command example:

In this case, the word input can be replaced with "clear" (clear), "rain" (rain) or "thunder" (thunder).

You can connect a button or lever to the command block to manually switch the weather, or create automatic scheme redstone for constant weather switching. This is easily achieved using repeaters, a button and a building block.

How to set a spawn point

Spawn points are an important component of many minecraft maps, including adventure, parkour maps, puzzles and more. Having to replay the map every time you die is extremely annoying. Using the "spawnpoint" command, you can save game progress and respawn after dying at the nearest checkpoint you passed. The command looks like this:

By connecting a command block to a building block with a button or pressure plate, players can set a spawn point at the location of the CB.

If you need something more complicated, you can add coordinates to the command to set the location of the spawn point.

Running from one place to another is tiring, especially on a multiplayer server. Using the "teleport" command, players can move to specific coordinates in the Minecraft world or other players' locations. Type in command block:

With them, you can have a certain set of coordinates for the player to teleport, like the location of the next part of the adventure map.

If the block is not for a specific player, "@p" can be used to select the nearest player.

If you're on a multiplayer server, you can bind the command block to yourself by using your Minecraft username.

These are just a few options on how to use command blocks in single and multiplayer Minecraft games. There are many much more complex redstone commands and schemes that mapmakers use.

The command block appeared in popular game Minecraft only from version 1.4, where the newest features for game participants are opened. With this version, gamers have learned about the concept of a command block, as well as its relationship with the console command. It is impossible to create it yourself.

The command block is a special item; various ciphers can be entered and written into it. After that, it begins to execute the intended command when it receives a redstone signal. Such a universal thing greatly expands the powers and capabilities of the creators of maps in which there is an adventure mode. In such places, you can privatize the area. It can be opened in minecraft with the right mouse button. As a result, you will see a window in which certain characters are written.

How to make it

Most players will be forced to get frustrated because it is impossible to do such a thing on their own. The reason for this limitation is due to the fact that it opens up incredible opportunities, namely, that thanks to it you will be able to manage the map, chat with all the players at once. Therefore, you cannot make it yourself, but there is a unique chance - to get it.

Purchase options:

If you are the creator of the server, then you can easily use it.
You can also get from the administrator of a specific server, namely to ask for rights. To do this, use the following function - give Player command_block. Enter your character's name.
You can make a command block in minecraft using a special cheat code. But, you will only need to play on a certain server that supports the use of such codes. The final stage is activation, which is carried out due to the action of the red stone.

Teams

If you want to get the whole list of commands that you can use, then use the chat and enter the word help. For example, to get ten iron ingots, you need to write the following form - give @p iron_ingot 10. Another - will allow you to teleport to the desired point with the specified coordinates, namely - tp Player 42 21 60.

Pointers to players in minecraft.

@e - absolutely all entities in the game;
@a - all participants in minecraft;
r is the maximum search radius;
rm is the minimum radius;
m is the game mode.

As you can see, this is a rather practical, interesting and easy-to-use program that allows you to increase your powers, adrenaline and enjoyment in the game to the maximum. Importantly, it cannot be built or crafted on your own, so you need to use a special command, then you will succeed. Good luck and new victories.

The execution of any actions assigned by the game participants are carried out by command blocks. You won't be able to create such a team while playing survival mode. It will also not work to summon them as tools while using the creative game mode. In order to functionally obtain such blocks, it is necessary to apply a couple of fairly simple commands, which, in fact, will allow them to be called. Let's look at a few simple methods.

Get a Command Block in Minecraft: Method 1

Launch Minecraft and select single player mode. Perform the creation of a world in which cheats are enabled.

Open the chat window and press the "/" key. This symbol will open a window where you can enter commands.

Enter the destination you want by choosing from the following lines:

"/give" the name minecraft:command_block and the desired number - after entering it into the console, the summoned items will appear among the tools;
"/setblock x y z minecraft:command_block" - this line turns one of the blocks into another, making it a command block, and to find it, you need to press F3 and select one of the found ones;
"/summon Item x y z (Item: (id:minecraft:command_block, Count:1))" - by entering this sequence, the player will summon the blocks to the place he needs.

Get a Command Block in Minecraft: Method 2

Run the game, select single player mode. Log in to an existing world, possibly a server. Enter the chat required to set commands by pressing "/".

Enter one of the suggested options:

"/give name minecraft:command_block required number" - this line allows you to call the required number of items and add them to your inventory;
"/setblock x y z minecraft:command_block" - if you enter such text, you can replace any existing block with a command block, and to determine the location in which it is located, you need to press the F3 key;
"/summon Item x y z (Item: (id:minecraft:command_block, Count:1))" - blocks will appear on the specified area.

Get a Command Block in Minecraft: Method 3

Use the "E" key to drag the block and place it on the panel. Click on the right mouse button and place the item on the ground.
Click on it again with the same mouse button. This will open a menu where you can configure actions.
In this box you need to enter the symbol "/". The options for these blocks are similar to those used in chat. They are sometimes connected to the electrical board. This allows commands to be executed automatically.

A command block is a cell in which you can enter various commands. The block itself starts the task when it receives a signal from the red stone. This block expands well when creating maps in minecraft, or where there is a right to seize some part or territory. The use of such a block is simply necessary in some game situations when everything can depend only on you. And the commands that you can enter can save others or protect you in this pixel world.

So, let's look at how to make a command block in minecraft 1.8.9 without mods. I want to immediately upset that the command block is simply impossible to do. But it is possible to get it, since the administrator of the server manages it. Or the player himself in single player mode. To get it, you need to drive /give Player command_block . The player value is the name of the player who needs this block.

After we learned how to make a command block in minecraft 1.8.9 without mods, we need to figure out how to write the command itself into it. To do this, you need to open the command block, and this is done using the mouse button. Right click on the block. Next, a window appears in which the command itself fits. By the way, a little lower there is a log line in which you can conveniently monitor the results of the executed commands, as well as errors that could occur.

In order to explore the entire list of available commands, you need to type /help in the chat window.

Using a command block will obviously make your game and performance in it easier, because with such a block you can perform many actions by writing the necessary commands into them. Also, depending on the type of game, some privileges are possible for you, since you are able to reward your comrades, or yourself. Also, the distribution of commands can be adjusted to those who are nearby, to a random player, to all players in the world, or to all entities that live throughout the map.

Today we will talk about what a command block in Minecraft is, how to get it, why it is needed and how, where and for what it can be used.

What are command blocks?

In Minecraft, a command block (CB) can automatically execute certain console commands as long as it is activated by a redstone.

They work in adventure mode, and allow map makers to improve the interaction with the player. In this case, the player is not able to destroy blocks and build new ones.

In Survival mode, Command Blocks cannot be interacted with or destroyed.

/give minecraft:command_block

When typing a team, remove the brackets around the edges of the player's name and quantity:

/give atombox minecraft:command_block 1

KB has a graphical interface with a text field, accessible by right-clicking the mouse.

Only players in creative mode and players with administrator status on the server can place command blocks, enter commands and save changes.

To use them in single player or multiplayer worlds, you must enable LAN mode and enable cheats.

Where are command blocks used?

Do you want constant day or night;
Do you want to change the weather;
You want to change the difficulty of the game;
You want to play a certain sound;
You want to send a message to the player;
You want to teleport to another location;
You want to give players items.

Adventure cards;
Parkour cards;
Puzzle cards;
Survival cards;

How to use the command block

Don't forget that Command Blocks can only spawn in Creative Game Mode. To go to it, you need the appropriate privileges on the server (if available) or activated cheats.

In the chat box, type "/gamemode c", "/gamemode creative" or "/gamemode 1" without quotes.

2. Clicking on the command block with the right mouse button

In creative mode, right-click on a command block to access it. To generate it, you need to use the "give" command, as described above in the text:

/give minecraft:command_block

Command blocks only work when connected to the redstone electrical circuit (by the way, there is a nice mod that allows you to increase the distance of power transmission). Right-clicking opens a dialog box where you can enter a server command. The maximum command length can be 254 characters.

3. Enter the command and click "Finish"

Remember that one KB can execute only one command!

Practical Use Cases

The following examples are simple and practical command block applications in single player and multiplayer in Minecraft worlds.

How to change the rules of the game

Game rules are a relatively new feature that allows players and command blocks to change certain basic settings in the Minecraft world. There are nine described game rules that can be controlled using the command block on the map.

You can use game rules to create permanent daylight or darkness, disable mob spawning, mob item drops, and more. When entering the "gamerule" command, use the following command:

game rule	The effect of the rule
commandBlockOutput	Enables/disables text input in KB
doDaylightCycle	Enables/disables the day/night cycle
doFireTrick	Enables / disables the spread / disappearance of fire
doMobLoot	Enables / disables the drop of items from mobs
doMobSpawning	Enable/disable mob spawning
doTileDrops	Enables / disables the drop of items from the CB when they are destroyed
keepInventory	Enables / disables saving items in the inventory after the death of the player
mob Griefing	Enables/disables KB destruction by creepers or endermen
naturalRegeneration	Enables/disables health regeneration for players

How to set the weather

In this case, the word input can be replaced with "clear" (clear), "rain" (rain) or "thunder" (thunder).

You can connect a button or lever to the command block to manually switch the weather, or create an automatic redstone circuit to constantly switch the weather. This is easily achieved using repeaters, a button and a building block.

How to set a spawn point

Spawn points are an essential component of many Minecraft maps, including adventure maps, parkour maps, puzzle maps, and more. Having to replay the map every time you die is extremely annoying. Using the "spawnpoint" command, you can save game progress and respawn after dying at the nearest checkpoint you passed. The command looks like this:

By connecting a command block to a building block with a button or pressure plate, players can set a spawn point at the location of the CB.

If you need something more complicated, you can add coordinates to the command to set the location of the spawn point.

With them, you can have a certain set of coordinates for the player to teleport, like the location of the next part of the adventure map.

If the block is not for a specific player, "@p" can be used to select the nearest player.

If you're on a multiplayer server, you can bind the command block to yourself by using your Minecraft username.

These are just a few options on how to use command blocks in single and multiplayer Minecraft games. There are many much more complex redstone commands and schemes that mapmakers use.

Get a Command Block in Minecraft: Method 1

Launch Minecraft and select single player mode. Perform the creation of a world in which cheats are enabled.

Open the chat window and press the "/" key. This symbol will open a window where you can enter commands.

Enter the destination you want by choosing from the following lines:

"/give" the name minecraft:command_block and the desired number - after entering it into the console, the summoned items will appear among the tools;
"/setblock x y z minecraft:command_block" - this line turns one of the blocks into another, making it a command block, and to find it, you need to press F3 and select one of the found ones;
"/summon Item x y z (Item: (id:minecraft:command_block, Count:1))" - by entering this sequence, the player will summon the blocks to the place he needs.

Get a Command Block in Minecraft: Method 2

Run the game, select single player mode. Log in to an existing world, possibly a server. Enter the chat required to set commands by pressing "/".

Enter one of the suggested options:

"/give name minecraft:command_block required number" - this line allows you to call the required number of items and add them to your inventory;
"/setblock x y z minecraft:command_block" - if you enter such text, you can replace any existing block with a command block, and to determine the location in which it is located, you need to press the F3 key;
"/summon Item x y z (Item: (id:minecraft:command_block, Count:1))" - blocks will appear on the specified area.

Get a Command Block in Minecraft: Method 3

Use the "E" key to drag the block and place it on the panel. Click on the right mouse button and place the item on the ground.
Click on it again with the same mouse button. This will open a menu where you can configure actions.
In this box you need to enter the symbol "/". The options for these blocks are similar to those used in chat. They are sometimes connected to the electrical board. This allows commands to be executed automatically.
Press the "/" key, a console window will appear, in which write the word "help". After it, type the name of the subject to which the sequence of commands is prescribed.

You probably know about the existence of commands for working with blocks in Minecraft, but you don’t know exactly how to use them. And if you are a map builder, then I think this will be very, very useful to you! Well, let's finally get started.

Let's take a closer look at this command:

X,Y,Z - coordinates of the place where the block will be installed or changed

TileName - block name, that is, its ID, it should look like this:

minecraft:Block name (lower case only)

Example: minecraft:wool or minecraft:iron_block

DataValue - block type, i.e. wool color, clay color, sandstone type, etc.

Example: 15 - type of wool, that is, black

What it should look like: minecraft:wool 15

OldBlockHandling is a new syntax, it comes in three types:

keep - checks if there is a block at the specified coordinates, if there is already some block there, then this syntax is not

will place the specified block at that location.

Example: /setblock ~ ~1 ~ minecraft:wool 15 keep

destroy - if there is a block at the specified coordinates, then it breaks it (with particle animation and sound)

Example: /setblock ~ ~1 ~ minecraft:wool 15 destroy

replace - simply replaces the block at the specified coordinates

Example: /setblock ~ ~1 ~ minecraft:wool 15 replace

DataTag - block or item tags, that is:

We want to install a command block, which will already contain some command, how to do this:

We write the block installation command and add to it (tags are indicated by such brackets ()) (Command:

/setblock ~ ~1 ~ minecraft:command_block 0 Syntax(Ex:replace) (Command:/say @p Ololo)

And when the command block is installed, it will have this command.

Let me give you another example:

We want to install a chest so that it contains some item or items, for this there is an items tag, to it

you can add another enchantment tag, but more on that in another part of the tutorial.

The items tag has 4 parameters:

Id - item id

Count - number of items

Slot - the slot in which the item or items will fit

Damage - a parameter that indicates how damaged the item is

How to do it all:

/setblock ~ ~1 ~ (id of the block this item will fit in) 0 replace (items:

[(id:276,Count:1,Slot:0,Damage:50)])

We get a chest containing 1 diamond sword, which is damaged by 50.

If you don't know what the ~ sign means, I'll explain now:

This is a sign of coordinates, if you wrote this sign, then the block will take the same coordinate where the command block is located.

If you add a number, then it will move the block to the specified number of blocks:

/setblock ~2 ~2 ~-2 minecraft:iron_block 0

The block will move away from the command block (or away from the player if you're typing a command in chat) 2 blocks up, 2 blocks forward, 2 blocks to the right, well, I think you'll figure it out.

This concludes my first guide. Good luck to all! And stay tuned for the second part of the guide!

After you have received the command block, put it on the ground and right-click on it. You will have a menu, and a line where it says “Console command.” We will enter all the commands in this line!

But before entering the command, we need to deal with some of the words that you see below!

These are commands, with the help of them you will appoint who will receive the effect, things or something else!
For example, you want to give a friend a diamond breastplate, to give it you need to write in the command block:

How to change the difficulty in the game. To change it, you need to enter the command in the console:

/difficulty [Difficulty]

Difficulty can be: peaceful, hard, easy, normal.

This way you can change the difficulty in the game!

There is another very important command, how to clear the inventory, this command can be used on the server!

/clear [to]

You can choose to clear the inventory of nearby players [@p], or assign a nickname!

How to make a command block in minecraft

What is a command block

How to make a command block

Teams

In order to get a complete list of commands that can be written in the command block, just enter the word help in the chat window.

By entering these commands, you will get the desired result:

give @p iron_ingot 10 - 10 iron ingots
setblock 42 21 60 wool - set block at coordinates x=42, y=21, z=60
tp Player 42 21 60 - teleport to a point with coordinates x=42, y=21, z=60

You can also use pointers to players:

@p - nearest player;
@a - all players;
@r - random player;
@e - all entities.
x - X coordinate of the search center;
y - Y coordinate of the search center;
z - Z coordinate of the search center;
r - the maximum value of the search radius;
rm - minimum search radius value;
m - game mode;
l - the maximum amount of experience the player has;
lm - the minimum amount of experience a player has.

Many of you know that in Minecraft it is possible to achieve the goals the player needs by prescribing in command line a specific team. It is very comfortable. It is also very convenient to download free games for android and enjoy your favorite game from your phone or tablet. But convenience should always strive to improve. At this point, the developers have upgraded to such an interesting thing as a command block. The essence of this device is that it executes your console commands, receiving a signal from the redstone (attention to the screen). With the advent of this block, the possibilities for crafters who create maps with an adventure mode have significantly expanded.

Of course, having such functionality, the command block is not at all "burning with the desire" to succumb to crafting. Only "heads" of servers - their administrators - can get it in multiplayer. For this, in server.properties» they require « enable-command-block» set to position « true". Why is this in a multiplayer game useful thing available only to superiors? Everything is very logical. Imagine that two garden neighbors pray at the same time: one for rain, the other for clear sky. Who to answer? First or second? This is how it is in Minecraft, if all crafters could reach the command block, whose will, whose commands should he execute?

But singles can also get a magic box. In the settings for this you need to write the following cheat code: /give @p command_block. Given the number of cheat codes, the owner of the command block becomes a truly cool crafter. Do you want to be your own director? Try this device.

Pointers

However, such a multifunctional box requires the ability to use it. “Trachtibidokh” is clearly not enough here, but there is no smell of nuclear physics either, so fears away. Let's start with the fact that you need to use the command block through the interface with the text area. You can save your changes only if you are a server administrator and in creative mode. The entered commands will be executed in Minecraft by activating the block with a redstone. To use the full command block, it is very useful to use special pointers to gamers:

@p - to the nearest player
@a - "hint" to all crafters, if the situation allows
@r - random player
@e - pointer to all Minecraft entities

For example, if you have good mood, and you want the crafter closest to the device to be enriched with cobbles, you need to issue the following: /give @p (4). The id of the cobblestone is indicated in brackets. Want to communicate with crafters in writing? Write in the interface field: /w @a [your text]. You can write, for example: “What do you want here, next to my command block?”

Pointer Arguments

The pointer to a specific crafter can become even more specific by using arguments that should be specified separated by commas and in brackets [square], for example, like this: @p. Minecraft has the following arguments:

X, Y, Z- coordinates of the search center. If you set the value to "~" (tilde), then the center will be our command device
r- search radius (maximum)
rm- search radius (minimum)
m- game mode argument
l- experience level (maximum)
lm- experience level (minimum)
name- player's nickname
c is a special argument for the pointer " @a". Its purpose is to limit the number of crafters that commands apply to. For example, @a- the first 8 crafters from the list, @a- last 8.