Glock 17 (Glock 17) is an Austrian pistol developed by Glock for the needs of the Austrian army. He became the first type of weapons developed by this company. The resulting sample turned out to be quite successful and convenient to use, thanks to which it was later adopted by the Austrian army under the designation P80. Due to its combat qualities and reliability, it has become widespread as a civilian weapon of self-defense.

Glock 17 pistol - video

Glock produces modifications of this pistol in various options for different cartridges, for example: 9 × 19 mm Parabellum Glock 19, .40 S&W - Glock 22, 10 mm Auto - Glock 20, .357 SIG - Glock 31, .45 ACP - Glock 36 and .45 GAP - Glock 37.

A design feature of the pistol is the absence of a fuse box and a trigger. The gun is mostly made of high-strength heat-resistant - up to 200 ° C - plastic. This makes the Glock 17 lightweight and extremely durable. The principle of operation is “grab and shoot”, there is no fuse, however, the shot will not occur without fully pressing the “safe action” trigger. It consists of 33 parts, and partial disassembly is carried out in seconds.

Story

After the end of World War II, the Austrian armed forces were armed with two main models of pistols Colt M1911A1 and Walther P38. The Austrian police were equipped with Walther PP and Walther PPK military and even pre-war years of production or released in the post-war years under license in France. To resolve this situation in 1980, it was decided to announce a competition for new pistol to equip the Austrian police and army.

The following requirements were imposed on the contestants:

Ammunition type: 9x19mm Parabellum;
— minimum magazine capacity: 8 rounds;
- the ability to control the gun with the right and left hand;
- quick bringing into combat position (without the need to switch the fuse);
- the possibility of assembly and disassembly without special equipment, the number of parts in the gun - no more than 58;
- all parts must be interchangeable within the same model without mutual adjustment;
- for 10,000 shots there should be no more than 20 delays;
- the gun should preserve the integrity and functionality as much as possible under external influences and temperature changes;
- maximum safety for the user: the shot should not occur when hitting a steel plate after falling from a height of 2 meters.

Various weapons manufacturers took part in the struggle for such a promising order. Among them was the then little-known company Glock, founded in 1963 in the town of Deutsch-Wagram, located near Vienna. At that time, the company was engaged in the production and supply of sapper shovels, bayonet-knives, belts and various ammunition for the Austrian army. Back in the mid-1970s, Gaston Glock, the founder and owner of the company, set the task of creating the simplest, most effective and reliable pistol for his designers.

Using the existing experience in the use of polymers in the manufacture of weapons, the Glock 17 pistol was created. The fundamental innovation of this model was the widespread use of polymer materials in its design, mainly impact-resistant polyamide was used. In 1982, according to the results of military tests, the Glock 17 pistol was adopted by the Austrian army under the designation P.80. Glock was ordered 25,000 pistols, production facilities were not ready for such a significant order, so subcontractors were involved until the full deployment of their own production facilities.

Around the same time, the pistol was presented, along with samples from other manufacturers, to participate in a competition called "M9" for the rearmament of officers and non-commissioned officers of all types with personal service weapons. armed forces USA (in the end, the Beretta model won).

Pistols submitted to the M9 competition

Soon after the arrival of the new pistol to the Austrian troops, this model gained considerable popularity, which prompted the Glock company to further expand and improve the model range, but the design of the existing pistol models of this company still retains those successful technical solutions that were first successfully used when developing the Glock 17 pistol.

The name "Glock 17", the pistol, most likely owes to the serial number (No. 17) of the package of technical drawings of the company, eventually accepted for production.

Production generations and variants

To date, there are four production generations of the Glock 17. Buyers are offered a choice of third or fourth generation pistols, the same applies to most other Glock models, but some models (Glock 17L, Glock 24, Glock 25, Glock 28, Glock 36, Glock 38, Glock 39, Glock 42, Glock 43) are offered only in the third generation, and some (Glock 40 and Glock 41) only in the fourth.

First generation

Pistols of this generation were produced until 1988, mainly for the Austrian army. They were distinguished by a handle with a uniformly distributed rough texture. In total, about 500,000 copies were produced.

Second generation; second and a half generation

The second generation Glock appeared in late 1988, early 1989. On the front and rear surfaces of the handle, corrugations began to be made in the form of small square protrusions forming horizontal and vertical lines, which increased the reliability of holding the pistol in the hand. The same corrugation is available on the front surface of the trigger guard. The second generation pistols were adopted by the FBI, the Finnish police, the armies of Norway and the Netherlands. After some time, sub-finger recesses began to be made on the front surface of the handles, this option was designated generation 2.5. Some authors prefer to call this frame an early version of the third generation.

third generation

The third generation, in addition to the corrugation and sub-finger recesses, also received a mount for underbarrel flashlights and laser designators, and in addition, an additional (second) pin that fixes the locking block (a metal insert in the case with a cross member, which, interacting with the figured cutout of the tide of the breech breech, leads to its lowering, and as a result - the disengagement of the barrel from the bolt). This change was made so that the locking block could withstand the recoil of the powerful .357 SIG rounds introduced from this generation. Although the 9 mm models did not need such a reinforcing pin, for unification technological processes they got it too. In the upper part of the handle began to make a recess for thumb, limited from below by an elongated protrusion.

As an option, third generation pistols are available in RTF2 (Rough Textured Frame). The handle of the pistol in this version is covered with convex points that increase the reliability of holding the weapon, including if it is wet. There are 64 points per square centimeter of the RTF2 frame surface. On the other hand, the constant wearing of a pistol in this version, for example in an underarm holster, leads to accelerated wear of the fabric of clothing in contact with the handle. In this regard, RTF2, for all its merits, is unattractive for professional bodyguards working in expensive suits.

fourth generation

The fourth generation has the most significant innovations among all existing generations. The handle is standard RTF, but compared to the RTF2 pistols of the third generation, there are larger gaps between the points - 25 points per cm², instead of 64 for the RTF, and the points themselves are larger.

The back of the handle is made in the form of a separate interchangeable part called the "back plate" (back strap). A part of the minimum size SF (short frame) is installed as standard, in this case the distance from the back of the handle to the trigger is 70 mm. The gun comes with two additional parts M (medium) and L (large), which can be installed instead of the standard one. Detail M increases the distance to the trigger up to 72 mm, L - up to 74 mm. Thus, they allow better grip ergonomics for shooters with longer fingers. To change the part, you need to remove the mounting pin, for which a special tool is provided in the kit.

The store latch button has become larger and more convenient. It also became possible to rearrange it to the right side (more convenient for left-handed shooters). In this regard, a second window appeared on the magazines of the fourth generation pistols under the latch tooth, on the right side. Previous generation pistol magazines can be used in fourth generation pistols, but only if the button is set to the left.

Instead of one return spring, fourth-generation pistols began to install two springs of different diameters (on the same guide rod). In this case, the load arising from recoil is distributed more evenly, the survivability of each individual spring increases, and the recoil felt by the shooter decreases.

Unlike previous generations, the fourth has a corresponding marking on the shutter - Glock 17 Gen4.

Design

This type of pistol is a fairly simple and reliable design, consisting of 33 parts and can be disassembled without the help of special equipment.

Pistol automation

The automatics of the Glock 17 pistol work according to the scheme of using recoil with a short barrel stroke. The design used a modernized system Colt-Browning (Brauning Cam), which is a modernization of the Browning earring. Under the breech, a tide is made with an inclined groove, coinciding with the guide ledge of the frame. The groove is made at such an angle that, moving along the ledge, it causes the moving barrel to decrease, due to which the latter disengages from the shutter-casing, and then stops, allowing the shutter to roll back unhindered.

The barrel bore is locked by means of a descending breech, which enters with its rectangular protrusion located above the chamber into the window for ejection of spent cartridge cases of the shutter-casing. The decrease occurs when the bevel of the lower tide of the breech breech interacts with the protrusion of the frame. After the shot, the bolt, moving backward, bends the uncoupler, thereby releasing the thrust, which then rises under the action of the thrust spring. When the bolt moves forward, the striker's hook encounters the thrust hook and returns the trigger through the thrust to the forward position. In this case, the drummer is pre-cocked. Pistols of the latest releases are equipped with an ejector, which also acts as an indicator of the presence of a cartridge in the chamber.

trigger mechanism

The trigger mechanism (USM) of the striker type with a preliminary partial cocking of the drummer when the shutter-casing moves back and additional cocking when the trigger is pressed. When the trigger is pressed, the firing pin block is first removed, then the sear releases the combat platoon, and a shot is fired. Glock calls the trigger of this design only self-cocking (DAO). However this system in fact, it is a classic single-action trigger with an additional firing pin.

In Glock pistols, the drummer is cocked by moving the shutter-casing back, and the relatively long trigger stroke and slightly more than a conventional single-action trigger, the force required to cock the drummer, replace the manually controlled fuse. To ensure maximum ease of handling weapons in the design of this pistol, it was decided to abandon the use of manual safety catches, only automatic ones were left, which made it possible to significantly reduce the time interval from the moment the pistol was removed to the moment the fire was opened.

In the absence of cartridges, the shutter delay is turned on, fixing the shutter in the allotted position. The length and force of the stroke in this case prevent an accidental shot in the absence of a safety lever. The trigger pull is 2.5 kg and can be adjusted from 2 to 4 kg. A small effort required to pull the trigger allows you to increase the accuracy of fire even for a poorly trained shooter.

Circuit breakers

The gun is equipped with three independently operating automatic safety locks. Glock called this system Safe Action. The safety lever, which is equipped with the trigger, blocks its movement back and releases it only when the shooter is consciously pressed. The automatic fuse of the striker makes it impossible for the striker to hit the primer of the cartridge in the event of an accidental failure from the cocking sear. The trigger rod, with its special protrusion, raises the fuse, which is a cylinder with a groove, and opens the way forward for the drummer. The shockproof fuse is a protrusion of the trigger rod, which has a cruciform shape, which is included in the groove of the shutter-casing. It prevents the combat platoon from falling off the sear during an external impact.

Sights

Sights Glock pistols, made of plastic, are made removable and installed in transverse dovetail grooves, consist of a rear sight with the possibility of making adjustments horizontally by shifting it and a front sight that can be replaced with another one with a different height for vertical adjustment. For ease of aiming in conditions low light a luminous dot is applied to the front sight, and a luminous frame is applied to the rear sight. The rear sight can be adjustable, but this is not usually the case in military models. Since 1988, pistols of this model in most cases are equipped with a special guide for attaching a laser target designator (LTC) or a tactical flashlight.

Design features

The gun has a simple and reliable design. When completely disassembled, it consists of 33 parts, including a magazine. Maintenance can be carried out without the use of special equipment using improvised means, which greatly facilitates maintenance and repair. Equipped as standard with a 17-round magazine; can also use magazines with a capacity of 19 and 33 rounds. In addition to the generally accepted design features, the Glock 17 also has a number of specific technical solutions that were then used in pistols of subsequent models.

Many parts of the pistol were created using polymer materials, including the frame (except for the barrel and bolt cover), which made it possible to reduce the weight of the weapon to 900 g in running order (for comparison: the weight of the Beretta 92 pistol with a magazine of 15 rounds is 950 g . in unloaded state). Moreover, the mass of the equipped store in the Glock 17 is 250 g, that is, about 25% of the weight is ammunition.

A distinctive feature of Glock pistols is also the high survivability of components and mechanisms. On average, a pistol is considered wear-resistant if it can fire about 30-40 thousand shots, and 300-350 thousand shots can be fired from the Glock 17. Such superiority in wear resistance is due to the extensive use of polymer parts and the unique barrel manufacturing technology patented by Glock.

The outer body and frame can be made of plastic in various colors. The most famous is classic black, there is also a Glock 17 in camouflage. In the production of parts that are subjected to the greatest stress, plastic is reinforced with metal plates. The guide frames along which the shutter casing moves are reinforced with steel inserts. At the bottom of the frame is a small metal plate stamped with the gun's factory serial number. On the pistol frame above the trigger guard on both sides there are latches, when pressed, incomplete disassembly of the pistol, removal of the bolt barrel and return spring from the frame becomes available.

Shooting underwater

An interesting feature of Glock pistols is the ability to fire underwater. In this case, not only rupture, but also swelling of the trunk does not occur. However, for stable operation of the primer, a special striker with transverse grooves or a set of Spring cups amphibia is required: the mainspring of the striker with a plastic pallet with holes. Available only for pistols chambered in 9 mm Parabellum. However, for firing under water without the risk of barrel swelling, the use of cartridges with FMJ-type full-shell bullets is recommended. Glock pistols allow shooting underwater at a depth of up to three meters. The bullet retains great energy at a distance of up to two meters when fired at a depth of one meter. Shooting is also effective. close range from under the water, while the sound of a shot is not audible.

Existing modifications manufactured by Glock

The Glock 17 pistol served as the basis for the entire range of pistols manufactured by Glock. Glock pistols, which have the “C” index in the model designation, are equipped with a built-in compensator, made in the form of several upwardly directed holes located at various intervals in the muzzle of the barrel, and an elongated cutout in the upper part of the casing-bolt. Availability this device allowed to reduce the recoil when fired, which slightly increased the accuracy of fire.

The following derivatives of the Glock 17 pistol currently exist:

Glock 17L- the target version of the model with an elongated barrel, appeared in 1988.

Glock 17C- modification equipped with a compensator cut in the barrel and casing.

Glock 17R- a variant of a pistol for training without cartridges with a red plastic case. Does not allow shooting, but practice/laser ammo can be used. The drummer himself is put on a platoon after each descent (Reset trigger).

Glock 17T- option with a blue body for training. Shoots markers with paint (Training).

Glock 18\18C- modification adapted for firing bursts.

Glock 19\19C- compact model with a shortened barrel (102 mm). Initially called Glock 17 Compact, since 1990 it has acquired the current designation.

Glock 20\20C- modification of the Glock 17 chambered for 10 mm Auto, has a magazine for 15 rounds and a built-in compensator.

Glock 21\21C- modification chambered for .45 ACP, in this regard, it has a number of design differences. The profile of the barrel has changed, which has become octagonal with right-hand cutting, the magazine capacity has decreased to 13 rounds.

Glock 22\22C- modification chambered for .40 S&W. This model was released in 1990. In May 1997, this model was adopted by the FBI as service weapon. It is a standard weapon for duty officers.

Glock 23 pistol with tactical flashlight and laser pointer

Glock 23\23C- a shortened version of the Glock 22, is a regular weapon of operational staff.

Glock 24\24C- target modification of the Glock 22 with an elongated barrel and increased accuracy of fire.

Glock 25- modification of the Glock 22 model chambered for 380 ACP, a compact low-power weapon for civil self-defense. First presented to the general public in 1995.

Glock 26- a compact version of the Glock 17 with a magazine capacity of 10 rounds and a weapon length of 160 mm.

Glock 27- compact modification chambered for .40 S&W. Much like the Glock 26, but has a 9-round magazine due to the slightly thicker ammo used.

Glock 28- compact modification of the Glock 25.

Glock 29- a compact version of the Glock 20 model with a magazine capacity of 10 rounds.

Glock 30\30S- a compact version of the Glock 21.

Glock 31\31C- modification original model chambered for .357 SIG.

Glock 32\32C- a slightly shortened version of the Glock 31 pistol with a smaller magazine.

Glock 33- a significantly shortened and reduced modification of the Glock 31, positioned as an "ultra-compact pistol".

Glock 34- target modification of the Glock 17 pistol with an elongated barrel and increased accuracy of fire. Introduced to the public in 1998.

Glock 35- target modification of the Glock 22 pistol, has an increased accuracy of fire, is specially designed for bench shooting and training of personnel. Introduced to the public in 1998.

Glock 36- a compact modification of the Glock 21, the magazine capacity is only 6 rounds, due to their single-row arrangement it has a small thickness, which facilitates covert carrying.

Glock 37- modification of the original model chambered for .45 GAP; magazine capacity 10 rounds.

Glock 38- slightly shortened and with a smaller capacity magazine (8 rounds) modification of the Glock 37 pistol chambered for .45 GAP.

Glock 39- a significantly shortened and reduced modification of the Glock 37 chambered for .45 GAP, positioned as an "ultra-compact pistol" (SUBCOMPACT).

Usage

Due to its successful design, the pistol has become widespread throughout the world. Various modifications of the Glock 17 pistol are in service with the army and police in more than 30 countries, such as Austria, Sweden and Norway. The model is approved by the NATO leadership as one of the main types of personal small arms, "Glocks" various modifications are in service with the police and intelligence agencies of the United States, Canada, Mexico, India, the Philippines, Saudi Arabia and many other countries.

This pistol is a typical self-defense weapon. Maximum effective range shooting range is 50 m, effective shooting at such a distance requires good shooting training and experience in handling the weapon from which the fire is fired. On average, the Glock 17 is most effective at a distance of 20-25 m, due to the fact that even a poorly trained shooter is able to hit a target at such a distance. The muzzle velocity of a bullet fired from a Glock 17 at the muzzle is 350-360 m/s. The muzzle energy is about 500 J. These characteristics determine the scope of this weapon model.

The energy of a bullet of 350-400 J is enough to inflict serious injury upon impact. The 9mm bullet has a pronounced stopping effect, which allows the shooter to inflict incapacitating, but not fatal, wounds. This quality is especially necessary for police and intelligence officers in cases where you need to stop the target, but there is no need to kill him. In the event that the enemy is protected by body armor, hitting the chest plate of the armor leads to strong concussion, and in some cases to loss of balance, which gives the shooter time to transfer fire to parts of the body that are not protected by armor.

Glock 17 can be effectively used in almost all climatic zones, with the exception of the Far North and zones with a sharply continental climate, in which the air temperature can drop below -40 ° C. This is due to his design features. Due to the wide use of polymers, this model is not afraid of the traditionally dangerous for pistols high humidity, dust, jungle and rainforests. But at low temperatures, the plastic frame of the pistol turns from an advantage into a disadvantage due to the increased fragility of the plastic; components and assemblies of the gun fail faster, and without proper regular Maintenance with the replacement of plastic components in critical situation the gun may be incapacitated.

The initial velocity of the bullet, like all pistols, is relatively low, which limits the effective range of 50 m.

In law enforcement forces, the Glock 17 is used as the main weapon on peacetime patrols.

In army structures, the Glock 17 is an additional weapon for officers, in some cases sergeants. They can also arm the crews of vehicles. In combat conditions, the Glock 17 is effective for self-defense when it is impossible to use the main weapon.

It is thanks to the fact that the Glock 17 effectively copes with the tasks in all three main areas of its application that it has become so widespread in the world.

Advantages of the Glock 17 pistol

High resistance to corrosion, thanks to the use of a special patented Glock technology for processing barrels and a large number of polymer parts.
- Smooth recoil and high accuracy of fire, thanks to the use a large number polymer parts.
- Less weight than pistols of the same class due to the manufacture of the body and frame of the pistol from plastic.
- High wear resistance of units and mechanisms. The barrel before burning out allows you to make 300-350 thousand shots (for other pistols, on average, this value is 40-50 thousand shots).
- Bringing into combat position does not require switching any fuse.
- Declared by the manufacturer, the possibility of firing in the aquatic environment without damaging the gun when changing the return spring.
- The gun can be easily disassembled for cleaning and maintenance without the use of special equipment.
- Ability to use stores with a large number of rounds.
- This pistol has a comparatively larger handle slope than other pistols, which makes shooting more comfortable.

Disadvantages of the Glock 17 pistol

There is a possibility that when carried in a pocket for a long time without regular maintenance, small debris can jam the firing pin release lever, making it impossible to fire. But, according to some sources, this event is too unlikely to affect the actual combat capability of the pistol.
- Shutter guides, having a small area, wear out quickly, which leads to a gradual deterioration in accuracy and accuracy of fire due to the rocking of the bolt frame.
- Low resistance of important pistol components to high rates of fire.
- With prolonged use, microcracks in plastic almost inevitably appear.
- The standard front sight is too wide and covers the target.
- Like all pistols with a plastic frame, it requires a confident hold of the weapon to ensure the operation of the automation.
- The trigger mechanism does not allow re-pricking the cartridge primer in case of a misfire - you need to pull the bolt. The disadvantage is conditional, with a small number of cartridges. In general, when shooting, the cause of a misfire is not important - the way to eliminate it is important. In the presence of cartridges, it is easier to pull the bolt than to cock an open trigger, not knowing whether the striker will prick the primer of this cartridge, provided that it has not been pricked for the first time.
- Due to the use of polymer materials, the Glock becomes more brittle at temperatures below -40 ° C, which can lead to cracks in the receiver and frame under mechanical stress. At high temperatures- over 200 °C - deformation of the plastic components of the pistol may occur. In the technical recommendations of the Glock company, the operating temperature range is specified from -40 to 200 ° C, the use of a gun outside this temperature range can lead to failure of its main components and structural components.

Curious facts

A widely advertised feature of the Glock 17 is its ability to fire under water when retrofitting the pistol with a special reinforced return spring. This effect is achieved due to the strength of the barrel and simple and reliable automation that does not use complex gas exhaust systems, and replacing the standard return spring with a reinforced one allows you to return the bolt back to the firing position even with a significantly increased environmental resistance. The practical value of this ability is low - this is due to the fact that in water the energy of the bullet is very quickly extinguished due to the high density of the medium, and the effective firing range does not exceed 1-2 meters. But despite the low efficiency of the pistol in this situation, the very presence of this ability indicates the high reliability and wear resistance of components and mechanisms, the preservation of the combat capability of the Glock 17 in conditions of any, arbitrarily high humidity, and even the ability to fire when there is water in the barrel bore , which in many other models of pistols can lead to barrel deformation or serious damage to the components and parts of the weapon.

Since the 1980s, the Austrian company has produced thirty-three models of polymer pistols that have become popular all over the world. So what is special about each individual model?

We bring to your attention a brief description of all models of pistols bearing the “Glock” engraving on the barrel.

Glock 17 Gen4 MOS

Let's start with new products, namely the MOS line. Every year, some kind of "bomb" is expected from Glock - and this year the fans were not disappointed again: the company added two models G17 and G19 to the MOS line.

Previously, the shooters tried in every possible way to independently modernize the shutter casing of this model, trying to install a collimator sight on it. But now, and, as hard as it may be to believe, has taken the G17 models to a new level.


Glock 19 Gen4 MOS

The second most popular model of the company also did not stand aside from the convenience that is gaining popularity today. collimator sights appreciated not only by participants in various competitions - armed citizens also cast their vote in favor of this device.


Models chambered for 9x19mm

Models under this cartridge are the most popular all over the world. The cartridge diameter allows the use of capacious magazines, and the recoil force is one of the softest in the service weapon category.

Glock 43: A backup plan for every day

Glock has a variety of handguns in a variety of sizes, whether it's the G17 or the compact G26. Who wanted to buy the smallest Glock, bought the G42 chambered for .380 ACP. But this ammunition did not suit everyone, and soon the company released the 9mm G43 model.

Thanks to the 6-round single-row magazine, its width does not exceed 26 mm, which means that it is perfect for concealed carry. In addition, it has all the distinguishing characteristics of "adult" models, including the Safe Action trigger.


Glock 17: Origin

Started the "Glock revolution". Today it is the most common pistol among law enforcement agencies around the world.


Glock 19: Workhorse

A more compact version of the G17 and the favorite pistol of the 40,000-strong army of New York police and UN security forces. Due to its light weight and size, he once replaced revolvers chambered for .38 ACP.


Glock 34 Gen4 MOS

This model, known as "Practical / Tactical", also received the ability to install red dot sights. This means that for a pistol that has already won in all major shooting competitions, new categories have opened up in which it is sure to win.


Glock 34: A model with sporting ambitions

The same G17, but with a slightly elongated barrel. Comparable in size to the M1911 Government.


Glock 26: Bodyguard

In terms of size and weight, this model is comparable to snub-nosed revolvers chambered for .38 ACP, which he replaced. In addition, it uses a more powerful cartridge, and the magazine holds 11 rounds.

An ideal fallback for those whose main weapon is the G17 or G19. Like the full-size models, it also has a double recoil spring, a magazine release button that is moved to the other side of the frame, and a textured grip for a secure grip on the weapon.


Models chambered for .40 S&W

This cartridge was introduced in 1990 as a cross between the powerful .45 AUTO and the compact 9x19mm. Gained popularity with both the police and ordinary citizens. The recoil of such weapons is stronger than that of 9mm models.

Glock 22: Favorite

The most popular pistol among the police in the United States. For its size, this pistol has the largest magazine capacity of any Glock model.


Glock 23: Versatile

The same G19, but with a wider bore. It is solid enough for the police, and quite compact for concealed carry. The favorite choice of professionals for undercover work.


Glock 27: Mighty Kid

This pistol can be carried in a pocket or in an ankle holster. Despite its size, it holds 10 rounds. The small size did not affect its accuracy or ease of handling in any way.


Glock 35 Gen4 MOS: King of the Competition

Another twin brother of the G34. It has a special double recoil spring to help dampen recoil and ensure reliable performance in the harshest conditions. And the MOS system provides him with many options for mounting sights.


Glock 35: "Practical Tactical" in .40

The same G22, but enlarged to M1911 Government size.


Models chambered for 10mm Auto

It is the most powerful handgun cartridge and is available in several versions, from comparable to the .40 S&W cartridge to hunting options that exceed 900 joules of energy. The G20 and G29 models, due to their lightness, reliability and soft recoil, are considered the best option for such cartridges. .

Glock 40 Gen4 MOS: Ammo Power 10mm Auto

The six-inch barrel of this pistol ensures that each of the 15 powerful rounds in the magazine will be delivered right on target without a hitch. The MOS model has a 2kg trigger pull and all the innovations that were introduced in the fourth generation: double recoil and a magazine release button that can be mounted on both sides of the frame.

Hard and corrosion-resistant coating of the slide and barrel, made using rotational forging technology, guarantees trouble-free operation of the pistol in the most severe conditions.


Glock 20 Gen4: 10mm Auto in Full Size

One of the few models that for many years has withstood all the tests that this cartridge brings down on it. The model has unsurpassed accuracy and reliability with a fairly soft return.


Glock 20 SF: Maximum power in a fairly compact size

The company introduces the SF design (Short Frame - a short frame) and in the model chambered for 10mm caliber. Despite the reduced frame, the length of the aiming line of the pistol guarantees high shooting accuracy. It can also be fitted with a 6" barrel for even greater accuracy.


Glock 29 Gen4: 10mm Auto Concealed Carry

The G29 delivers the reliability of the full size G20 and features a roomy 10+1 magazine.


Glock 29 SF: Maximum power in a compact format

A short bezel is also available for the G29. This sub-compact frame has a new and more ergonomic trigger placement.


Models chambered for .45 Auto

This high-powered cartridge has been instilling fear in its opponents for over 100 years. There are both full-size and pocket pistols on the market for a variety of variations of this caliber.

Glock 41 Gen4 MOS: Victorious

Another "Practical / Tactical" pistol with the MOS system, but already chambered for the high-precision .45 Auto cartridge.


Glock 41 Gen4: The .45 Auto Champion

He was born in order to give odds to other rivals in the competition. Its long casing-shutter provides the maximum length of the aiming line, which has a positive effect on the accuracy of shooting.


Glock 21 Gen4: Standard among models chambered in .45 Auto

With this model, even a beginner will feel all the advantages of this cartridge. Double return spring and guarantee the shooter a comfortable grip and shooting.


Glock 21 SF: An American Legend

This pistol is renowned for its accuracy and soft recoil. This powerful and lightweight handgun is a reliable workhorse on both sides of the poles.


Glock 30 Gen4: Undercover

A compact version of the G21 that is great for concealed carry and outperforms most competitors in accuracy.


Glock 30 SF: The right choice for concealed carry

This model has a shortened frame and is the right choice of fighters of various special forces.


Glock 30S: Excellence

The Slim model (narrow) combines power, high magazine capacity and convenient concealed carrying. Engineers have managed to combine the G36 .45 breechblock with the narrow frame from the G30 SF.


Glock 36: The power of a .45 Auto cartridge in a compact size

The frame of this model has been flattened, which guarantees comfortable handling for people with short fingers. The magazine holds 6+1 rounds, and thanks to its width, which does not exceed 25 mm, it is great for concealed carry.


Models chambered for .45 G.A.P.

The .45 Glock Auto Pistol is designed to provide the shooter with the power of the .45 Auto cartridge in 9mm pistol format.

Glock 37: Massive power in a perfect format

This model combines two of the most desirable characteristics among shooters: the power of the .45 Auto cartridge and the convenience of the original G17. This model has it all: Safe Action, a polymer frame, a rotationally forged barrel, and an extremely durable cover-gate.


Glock 38: Compact

The second stage in the evolution of models for this ammunition. A capacious magazine for 8 + 1 powerful cartridges in a compact format was appreciated by both professionals and armed citizens.


Glock 39: Maximum power in the most compact format

A subcompact version offering the power and accuracy of the .45 GAP cartridge. The right choice for pros who want to experience all the charms of this brand in a compact size.


Model chambered for .380 Auto

With this cartridge, usually, acquaintance with weapons begins with most shooters. and people with short fingers. In addition, the small size makes it easy to hide them under clothing.

Glock 42: Back up plan

Set a new standard for ultra-compact handguns. It has a large 6+1 magazine and is very easy to handle. It is also the smallest pistol from Glock.


Model chambered for .357

Imagine a .40 S&W case with a neck that has been narrowed for a 9mm bullet and you have a .357 cartridge. Such a cartridge provides energy revolver cartridge"Magnum" in the format of pistol ammunition.

Glock 31: Ammo Power.357

This is a full size pistol with a magazine capacity of 15+1 high powered .357 cartridges.


Glock 32 and Glock 33: The power of the .357 cartridge in a compact format

These models can offer the shooter the compactness of older .38 revolvers and the power of .357 with much softer recoil.



1,0 1 -1 2

Cooled pistol Glock K17 SO Black (Glock 17, Kurs-S)

Construction and appearance Glock K17 SO black, have the maximum similarity with the combat prototype. Therefore, disassembly and cleaning will be a pleasant experience for people who have interacted with the original. At the same time, the gun does not require a large amount of lubrication, because the design is extremely simple and reliable.

Every person has seen the legendary Glock 17 pistol at least once. It was widely used both in cinema and computer games, and in the armies of different countries. However, due to its low weight and the principle of operation, it took out and shoot, it was widely used as a weapon for self-defense. The first light saw this model in 1982. The Austrian company Glock, for 6 years, has released about half a million copies of the first model. And the production of subsequent generations is still in effect.

The Glock K17 CO Black is a chilled version of the Austrian gunsmithing masterpiece. It is not designed to fire live ammunition. They were replaced by light-noise idle 10TK . The volume of the shot and the flash are in no way inferior to the original, which makes this charge excellent for simulating shooting.

The weight of 750 grams allows the pistol to be confidently placed in the hand, especially despite the fact that the handle has a rough black surface. The Glock K17 CO, unlike its progenitor, is 150 grams lighter, this was achieved by manufacturing the shutter from a Zamak zinc alloy. The original is made of weapon metal and covered with plastic, which is completely unnecessary for a chilled weapon.

The pistol has a semi-automatic firing mode, which means automatic feeding of a cartridge after each shot. By the way, in a clip made of plastic (as in the original), in a two-row arrangement is placed 10 blanks .

For your safety, the gun is equipped with two safety locks. Flag - located on the shutter, and the second - automatic, on the trigger.

Of course, all these factors make the Glock K17 SO Cherny Kurs-S an excellent demonstrative weapon for simulating shooting at film set, or entertainment with friends.

Characteristics of the cooled pistol Kurs-S Glock K17 CX Black

brand Kurs-S
Manufacturer country Russia
Type Chilled Pistol
Combat analogue Glock 17
Dimensions (Length) 196 mm
Caliber 10TK
Ammunition Blank cartridges 10 TK
Charging capacity 10 rounds
Energy source Noise cartridge 10TK
blowback yes (automatic reloading with spent cartridge case ejection)
Base material metal
Gate material metal
frame material black metal / polymer
fire mode semi-automatic (cartridge is loaded automatically after each shot)
Contents of delivery Decommissioned cooled pistol, passport, case, magazine
Certificate
Instruction
Assembly Diagram (Explosion Diagram)

Cooled pistol Glock K17 CO Black (Glock 17, 10TK, Kurs-S) buy in the online store website at best price in the Internet. The price of the Cooled pistol Glock K17 CO Black (Glock 17, 10TK, Kurs-S) is low, only 13890 rubles. Delivery across Russia with payment upon receipt (cash on delivery).

legendary pistol Glock is of increasing interest in Russia, it is used both for sports (without the ability to take a pistol home from a shooting range) and by special services. As we try to match current trends, then we consider it necessary to tell about four very interesting models of this pistol Glock 17, Glock 19, Glock 26, Glock 34- all these models are structurally very similar, many of their spare parts are interchangeable, and the caliber for all is 9x19 Parabellum.

Studying the awareness of our fellow citizens about this wonderful pistol, we noticed that Glock 17 is often confused with Glock 19, and very few people have heard about models 26 and 34. In this article, we will collect information on Glocks 17, 19, 26, 34 in one place, see how the pistols differ and which one was originally designed for what.

Glock 17 was developed by Glock specifically for the Austrian army, later the pistol was adopted by the armies of several more countries, entered the FBI, the police and was put on sale among citizens of countries where the COP was legalized.

Video diagram of the Glock 17

Generations (generations) of the Glock 17 pistol

Since the pistol was launched into the series in the early 80s, and the requirements for weapons have been constantly increasing since then, the company had to periodically make changes to the design to keep up with the times. In total, there are currently 4 generations of Glock 17, moreover, now in the wide sale of zero Glocks (not secondary) there are pistols of only 3 and 4 generations, that is, Glock 17 Gen3 and Glock 17 Gen4. Let's take a closer look at what's happening with generations.

Glock 17 Gen1

The main consumer of the first generation Glock 17 was the Austrian army. Pistols were produced until 88. The main visual difference of the 1st generation can be considered a handle without recesses for fingers and the absence of corrugation on the back and front of the handle.

Glock 17 Gen2

Corrugation appeared on the front and back of the handle, pistols began to actively enter the FBI, the Finnish police and some European armies. Later, subfinger recesses appeared on the handle - this is also the second generation.

Glock 17 Gen3

If the first generation differed slightly from the second, then Gen3 introduced a bar for flashlights or a laser pointer, an additional pin that holds in place a part installed in a frame that interacts with the barrel. In addition, depressions appeared on the top of the handle, which allow you to better hold the gun. Guns Gen 3 can be found both standard and with a notch on the handle type RTF2 (Rough Textured Frame). This notch increases the confidence of holding the pistol with wet hands, but causes discomfort when wearing the pistol while wiping clothes.

Glock 17 Gen4

Visually, Glock Gen 4 differs from Gen 3 primarily in the inscription on the shutter “GEN4”, the RTF surface (large dots, rarely stand) and not RTF2 (small dots, often stand), and interchangeable “backs” of the handle: the back is thin from the factory, for those who are uncomfortable, they take a thicker or very thick back from the kit and put it on themselves. Besides Glock 17 Gen4 has an extended magazine reset button that can be rearranged to the other side (finally by the 4th generation they thought about lefties). After moving the magazine reset button to the right side, magazines from previous generations no longer fit. Instead of one bolt return spring, two springs are put on the rod, which increases the resource of each of the springs and reduces the pistol toss after firing.

The Glock 17 model is, as it were, the base one, many Glocks of various calibers have been developed on this basis, but we will talk about the Glock 19, Glock 26, Glock 34 in 9x19 caliber.

Glock 19

In fact Glock 19 is a more compact version of the Glock 17 pistol, the barrel has been reduced (102 mm instead of 114 mm for 17) and the handle, which is standardly designed for a 15-round magazine (instead of 17 for Glock 17). Otherwise, the pistol is almost completely identical to the Glock 17. It is popular with the police, special services, and citizens. It is a very balanced model in the sense that it is quite convenient to carry it hidden, but it has sufficient accuracy and power: that is golden mean between a military pistol and something subcompact.

Glock 26

A sub-compact pistol based on the Model 17, but more stripped down than even the Model 19: the barrel Glock 26 88 mm long, and a 10-round magazine is standardly placed in the handle. It was developed for the civilian market, but is also in some demand among employees. This pistol is so short that a telescoping recoil spring had to be developed. The rest of the design is the same Glock 17.

Glock 34

Version of the Glock 17 with an elongated barrel and a cutout in the front upper part of the bolt. The barrel length is 135 mm, which is 21 mm more than the base model 17, the bolt and return mechanism have been changed accordingly. Otherwise, the pistol is identical to the Glock 17. Pistol Glock 34 was created for sports, but also came in handy in the armies and special forces of Malaysia, the USA and Chile.

In the following materials, we plan to talk about tuning Glock 17, Glock 19, Glock 26, Glock 34:

Fortunately, a huge number of tuning kits are suitable for all these pistols, because they are developed on the same basis.

First generation Glock 17 pistol


second generation Glock 17 pistol


third generation Glock 17 pistol


fourth generation Glock 17 pistol


Glock 18 pistol (automatic)


9mm Glock pistols. The .357 and .40 families of weapons look the same and have similar dimensions


.45 caliber Glock pistols


9x17 caliber Glock pistols (.380)


Glock 17 pistol on x-ray. All bright, contrasting details are made of steel, and only the plastic frame and trigger are visible as a faint outline.

TTX pistolsglock caliber9x19

Glock 17

Glock 19

Glock 26

Glock 34

with hammer preload

Length, mm

Barrel length, mm

Capacity, cartridges

performance characteristicspistolsglock caliber9×17

performance characteristicspistolsglock caliber.357SIG

performance characteristicspistolsglock caliber.40S&W

Glock 22

Glock 23

Glock 27

Glock 35

with hammer preload

40S&W (10x22mm)

Length, mm

Barrel length, mm

Capacity, rounds

performance characteristicspistolsglock caliber10mm Auto

TTX pistolsGlock caliber .45gap

performance characteristicspistolsglock caliber.45ACP

Glock 21

Glock 30

Glock 36

Glock 41

with hammer preload

45ACP (11.43×25)

Length, mm

Barrel length, mm

Capacity, rounds

In 1980, due to the moral and physical obsolescence of the pistols in service in Austria, a competition was announced for a new army pistol called the Pistole 80. Pistols from such experienced manufacturers as Beretta, Heckler-Koch, Steyr took part in the competition, but in 1982 the Austrian The army officially adopted the pistol of the hitherto practically unknown company Glock model 17 under the designation P80. Before the start of the competition, Glock was known mainly as a manufacturer of army knives and sapper shovels. Its ambitious owner, Gaston Glock, recruited a team of experienced gunsmiths specifically to participate in the competition and gave them the opportunity to create a pistol “from scratch”, and they succeeded. Using a few unorthodox, but in principle not new ideas, the Glock team managed to create an exceptionally simple, reliable and inexpensive pistol to manufacture.
Building on the existing positive experience the use of polymers in the creation of small arms in pistols (VP-70 of the German company Heckler-Koch) and assault rifles (AUG of the Austrian company Steyr), Glock engineers created a pistol with a polymer frame. This decision made it possible to reduce the cost of production, increase survivability and corrosion resistance, and lighten the weapon. To ensure the most simple handling of weapons, the Austrians abandoned manual fuses, leaving only automatic fuses. The striker-type trigger with pre-cocked striker was inherited from the Austrian Roth-Steyr pistol of the 1907 model, the automatic trigger safety from the German Sauer pistol of 1930, the modified Browning barrel locking system from the SIG-Sauer P220 pistol. The total number of parts of the new pistol, including the magazine, was only 33.

For more than 30 years since the appearance of the first model 17 Glock pistol, the company has created several dozen models on its basis in all the most popular pistol calibers (9x17, 9x19, .357SIG, .40SW, .45ACP) and even tried to create its own cartridge. 45GAP (Glock Auto Pistol), which turned out to be not so successful. Glock pistols have gained worldwide popularity as an army weapon (they are in service not only in Austria, but also in the UK, Sweden and many other countries). In addition, these pistols are popular as a police weapon (particularly in the USA), as well as civilian weapons for self defense and sports.

Over the years of the release of Glock pistols, they have changed four generations of models.

The first generation of Glock pistols consisted of the Glock 17 / P80 pistol itself, which had smooth handles with fine corrugation “in a circle”.

The second generation of Glock pistols, which appeared in 1988, additionally included the first compact Glock 19 model and was distinguished by the presence of larger notches on the front and back of the handle.

The third generation of Glock pistols, which appeared in 1998, received a guide for attaching a flashlight or a laser sight under the barrel, recesses for fingers and a “shelf” for the thumb on the weapon handle and a new ejector, which additionally serves as an indicator of the presence of a cartridge in the chamber.

Fourth generation of Glock pistols, launched in 2010 and produced in parallel with the 3rd generation models, received pistol grips of a reduced cross-section with interchangeable pads on the back of the handle, allowing the weapon to be adapted to shooters with a wide variety of palm sizes. In addition, the 4th generation pistols received an enlarged magazine ejection button, which can be rearranged on both sides of the weapon, and a number of smaller design improvements.

Standing apart from this entire line of weapons is the Glock 18 automatic pistol. Designed for law enforcement, this pistol was never commercially available and was produced in small numbers.

As mentioned above, the main advantages of Glock pistols are ease of construction and use, high reliability, significant resource, and relatively low weight. The disadvantages of these pistols are usually not the most convenient shape of the handle (corrected in the current 4th generation of pistols), as well as the absence of any manual safety catches, which, with insufficient user training, periodically leads to accidental shots.
The “plastic” design of the Glock pistol, widely exaggerated in the media, allegedly led to the fact that the pistol was invisible in x-rays and is not detected by metal detectors is nothing more than a fabrication of the press. In fact, any Glock pistol consists of metal for more than half of its mass and is perfectly detected by any special means.

The automation of all pistols of the Glock series (except pistols of models 25 and 28 in 9x17 caliber) is based on the Browning scheme with a short stroke of the barrel and a rigid locking of one protrusion in the breech breech behind the window for ejecting cartridges in the bolt. The skew of the breech for its unlocking and locking is carried out by the interaction of the figured tide under the barrel with a steel insert in a polymer frame. The gates are made of steel by precision casting and have a special coating highly resistant to external influences. Trunks have polygonal rifling. The trigger mechanism is a striker, with a preliminary cocking of the mainspring and its additional cocking by the shooter's muscular strength at the moment the trigger is pressed. To pre-cock the mainspring, it is enough to pull the bolt back about 15mm and release it. The gun does not have non-automatic (manual) fuses. The system of automatic fuses (safeaction) includes a safety on the trigger (blocking its movement if it is pressed incorrectly), blocking the drummer when the trigger is not pressed and blocking the drummer from breaking off the sear when strong blows. The frame of the pistol is made of high-impact plastic in black or (more recently) olive green. Steel guides for the slide are integrated into the frame when it is cast, as well as a small metal plate on which the serial number of the weapon is engraved. In front of the frame of modern pistols there is a guide for attaching a combat flashlight or a laser designator. Sights are open, with white contrasting or luminous inserts. Glock pistols with the index "C" after the model number have a barrel toss compensator, made in the form of upward holes in the muzzle of the barrel and the shutter casing. On the frame above the trigger guard on both sides there are sliders, when pressed down, the pistol is partially disassembled (removal of the barrel, return spring and bolt from the frame). Cartridges are fed from box-shaped double-row plastic magazines with cartridges exiting in one row (with the exception of the most compact models 36 and 42, which have single-row magazines).

The Glock 18 automatic pistol differs from the basic Glock 17 model by the presence of a fire mode translator on the left on the shutter. For this pistol, extended magazines with a capacity of 33 rounds have been developed and are being produced, also compatible with 9mm Glock pistols models 17, 19 and 26.