Internet access is necessary for every person for work, study or for their personal needs. The mobile phone does not always pick up the Internet. Not everyone knows how to amplify the 3g signal of a smartphone.

In cities where a large number of cellular operators, according to prior there should be no "dead zones" for the Internet. In fact, everything is different: a person, moving around the area, periodically gets into them. This is due to architecture, the building material from which houses are built, metal structures. The reasons for poor Internet include the presence of many industrial interference.

To protect the smartphone from mechanical damage, various cases are sold. If there are metal inserts inside the protection, then this affects the quality of the received 3g and 4g signal.

When the user travels outside the city, a 3g signal booster for a smartphone is required, where the Internet speed is sharp or absent.

Almost all people use 3g or 4g internet, which is offered by mobile operators. It provides access to networks anywhere, unlike a wi-fi network. But due to the congestion of communication lines, the Internet speed drops to the level of 2g. Even when the phone is on a tariff with a good speed of 3g or 4g, it guarantees that the speed will not slow down.

Two solutions will help improve smartphone reception - this is software and using devices purchased or made independently. Each method has pluses. With an integrated approach to increasing the speed of the Internet connection, the user will achieve the fastest possible signal.

Software settings

Sometimes people are unhappy with the speed of the Internet on mobile phone. Everyone knows that the speed and quality of an Internet connection depend on the operator, the selected tariff and coverage area. But not everyone knows that you can amplify the signal on your smartphone using the InternetSpeedMaster application. The program optimizes the phone by changing system files. It is easy to strengthen the antenna on a smartphone using the application, but you need to have root rights, if the phone is rooted, then installation will take 2 minutes.

Configuring the program for amplifying 3g and 4g

How to configure InternetSpeedMaster to boost 3g and 4g signal:

  1. enter the application and grant superuser rights;
  2. if the device is rooted, enter ApplyPatch, reboot. The Internet signal booster on the smartphone will work;
  3. if the user does not have superuser rights, enter ImproveInternetConnection, then reboot the device.

This method does not work on all devices, so it is recommended that you first get root rights in order to surely increase the 3g signal on your smartphone.

If the user wants to restore the old settings, it is recommended to enter the menu, click "Restore", confirm their actions by selecting the "OK" button.

Hardware improvement

You can strengthen the cellular signal on your smartphone by purchasing additional devices in specialized stores - a repeater and various kinds antennas. Such devices significantly amplify the signal coming from the operator. In this situation, no manipulations with the device files are required.

All devices connected to the Internet 3g or 4g, included in the antenna coverage area, increase the download speed. To strengthen the 3g signal for a smartphone with your own hands in the country or in the apartment, you need to take steps that will enable the operator's signal to reach as quickly as possible.

Today, many citizens use wireless Internet, but at the same time they strive to increase the speed of its work. After all, excellent access is guaranteed when the modem is close to the base station of the mobile operator. In this regard, those who work on the Internet far from the station are content with low speed. Is there a technical way to solve this problem? The best option is a 4G antenna with your own hands.

What is a Kharchenko antenna and how does it work

The so-called Kharchenko antenna, which is designed for a 3G modem, is a homemade model. There is nothing particularly complicated in her device. The zigzag design was proposed by the scientist K. Kharchenko back in the 1960s. Today it is quite popular among radio amateurs, not only due to its simple device, but also due to its excellent repeatability, as well as broadband. The latter advantage applies particularly well to the helical design.

According to their own device, models can differ quite a lot. Based on the size of the plate, the frequency of the design changes significantly. At the same time, it must be taken into account that homemade antennas may include items made of plastic and metal.

The antenna for the modem is different types. The simplest is omnidirectional. It can receive and transmit a signal in all directions equally intensively. In particular, this may be a simple quarter-wave vibrator. To put it simply, this is a piece of wire that has a length of a quarter wave of the signal that is being received.

A sector antenna can implement radiation limitation in a particular sector. In particular, if an iron sheet is placed behind an omnidirectional device, then a sectoral structure will be obtained. Its sector will be 180 degrees. Such an iron sheet is called a screen.

The most efficient is the directional design. Thanks to right choice screen curvature, you can make a narrow beam that will emit a radio wave.

The main antenna nodes are:

  • a vibrator on which induction occurs, guidance of a wave of electromagnetic oscillations that are sent by a transmitter of a cellular operator;
  • a cable together with a matching unit that transmits an induced signal directly from the vibrator;
  • signal transmission node from the cable directly to the modem input;
  • a reflector that eliminates interference, as well as reflected signals to increase receiving power.

Do-it-yourself Kharchenko antenna is an excellent device for anyone who wants to have high-quality communication without having to spend large sums of money. It is very easy to make even ordinary person who do not have the appropriate professional skills. The result is truly excellent. This design will last for a long time.

Making an external antenna

As a rule, a do-it-yourself external antenna for a 4g modem is endowed with two square components. The performed calculation of the Kharchenko antenna for a frequency of 2100 MHz shows that the dimensions of the sides of the component should be 53 millimeters each.

However, to reduce the internal resistance of the antenna, craftsmen advise making not square components, but diamond-shaped ones, in which the angle is 120 degrees.

Detailed instructions are given in this video:

How to boost 4G signal?

In order to increase the effective use of the USB modem antenna, it is equipped with a reflector - a steel plate. It can be made from foil textolite. The distance between the antenna and the reflector should be 36 millimeters. In order to create a distance between the antenna and the reflector, you can use some kind of cap or box.

In houses and apartments where there is no possibility of connection wired internet via fiber optic line, there is a use case wireless access via USB modem. Such devices are available from popular mobile operators. Megaphone is no exception. Unfortunately, sometimes a weak signal level does not allow you to enjoy the Internet, so you need to figure out how to fix the situation.

A 3G USB modem is a small device in the form of a flash drive. Ease of use lies in the fact that after the purchase you do not need to configure anything. It is enough to connect the modem to the PC, and operating system will set up the program.

Subscribers can purchase new models of USB modems, the main feature of which is a high data transfer rate:

  • E173 - 7.2 Mbit;
  • E1820 (E352) - 14.4 Mbps;
  • E367 - 28.8 Mbps.

The outgoing speed of all types of devices is up to 5.76 Mbps.

The above throughput is theoretical. Often, when using the gadget, malfunctions occur. Low speed data transmission is the scourge of the provider and the subscriber. Solving this problem by the operator (building a new base station or changing settings) is problematic.

Reconfiguring sectors leads to the fact that the coverage and signal level at the client's address will become better, but at the same time it will worsen in another part of the settlement. Instead of one problem, the operator can get several. The subscriber has to fix the failures on his own.

What does speed depend on?

The following factors affect the data transfer rate:

  • Computer performance - on the box with the modem, the characteristics and requirements for the PC must be indicated. If the specifications do not match, the device may not work or function incorrectly;
  • Weather conditions: rain, snow, fog, even blossoming leaves on trees, can interfere with the radio signal and lead to a decrease in speed;
  • Distance - the farther the base station is located, the worse the coverage and the level of the cellular signal;
  • Network congestion by time of day - there are several daily peaks when the BS is overloaded. The number of channels does not change, but the number of users logged into the network varies constantly. How more people connected at the same time, the lower the data rate. This is well manifested in resort cities - in winter and autumn. Mobile Internet works great for local users, but with the onset of the tourist period, there are problems with accessing the network;
  • The presence of construction sites, cranes, building sheathing of metal structures - all elements can affect the radio signal, taking it upon themselves. As a result, if a new house is being built nearby and a crane is brought in, there is a drop in speed and signal deterioration in the district.

Everything on which the propagation of radio waves depends affects the data transfer rate.

How to amplify the signal of a 3g modem on a megaphone?

If the bandwidth at your address has dropped, and this happens all the time, then you can solve this problem with:

  • hardware;
  • Antennas;
  • Homemade amplifiers.

Before using one of the methods, it is necessary to analyze the situation in order to determine what is most suitable.

Signal enhancement hardware

Hardware includes various signal amplifiers, repeaters, repeaters. These are devices that are installed in the house, connect to a power source (socket). The repeater acts as a transceiver from the BS to the subscriber. A repeater is an amplifier that receives a signal from a BS, improves its quality and transmits it further to the end user's terminal equipment. They do not require any settings. Their main function is to increase the signal level in the room. When using this equipment, the speed can reach maximum values.

A significant drawback is the high cost. You can buy them in specialized stores. The operator also sells some models.

Antennas

Directional antennas also help to amplify the signal of a 3G modem. They can be installed both indoors and outdoors. The design has the same functionality as amplifiers - it "attracts" the signal and redirects it to the modem. Antennas are somewhat cheaper than repeaters and repeaters, but they are less efficient.

Do-it-yourself signal amplification

The cheapest and easiest signal amplification option is to find a good place for the modem. Surely you know in which direction the operator's base station is located. Try to place the modem in the opening of the window that is directed to the BS. If this measure does not help, then the operator advises using an extension cord. This is a long cable that connects to a computer or laptop on one side, and connects to a router on the other side. Using this cable, you can place the modem in the room as close as possible to the ceiling and to the window. Also, the cable can be taken out of the room. The device must be protected from moisture by wrapping it in a bag or cutting an opening in a plastic container.

Users share their lives: you can attach something spherical to the modem - many people use lamps to warm their ears, stainless steel plates or even colanders. The modem is located in the middle. The whole structure is placed in the window opening. The working principle is reminiscent of satellite dish. In this case, the nearest BS acts as a satellite.

How to strengthen the signal of a 4G modem on a MegaFon?

MegaFon 4G Modem is a device for wireless Internet access in the LTE/UMTS/GSM network. The great advantage of the router lies in its versatility - it can work in both LTE and 3G, as well as 2G.

The device does not require additional settings. The first time you connect, the computer's OS will install itself.

Peculiarities

Routers focused on working in a 4G network have some features:

  • Connector for memory cards Micro SD Card Slot (recommended capacity - up to 32 GB) - the card is not supplied.
  • Online update of the program to the modem (if you are in your home region, traffic is not paid);
  • There is a connector for connecting an external antenna (MIMO technology) - CRC9 (it is not included in the kit).

Strengthening the signal on a 4G modem is no different from the principles for improving third-generation routers. For amplification, repeaters, repeaters, including handicraft ones, are used. The only thing is that these devices must support the 4G format. Devices that boost the 3G signal may not have any effect on the LTE modem.

When buying an amplifier device, be sure to check with the seller the formats that it supports.

DIY signal amplifier

Making a 4G signal booster at home is quite simple. To do this, you need a single-core copper wire, 10-12 m coaxial cable, fasteners and plastic.

A "figure eight" is being prepared from the wire. Such a device is called the Kharchenko antenna. In the center, the structure has a joint. A cable is soldered to this connection. The other end will wrap several turns around the modem itself. A metal plate can be attached to the antenna, which will act as a reflector. Also, the edges of the rhombus are sometimes wrapped in foil. The antenna is placed on the roof or pole.

Femtocell

Of all possible repeaters, repeaters and amplifiers the best way is a femtocell. This unit is a small base station. Radiation standards do not have any impact on human health, but the quality of communication when used becomes ideal. Devices are installed in areas with poor coverage, in basements, at remote sites.

The problem is that femtocells are not for sale. individuals. And if you buy it, then there will be little sense from it. The operator prescribes the parameters of the station on the BS. If this is not done, then it will not work. Devices are issued to corporative clients after conducting radiofrequency studies. The femta requires a fixed Internet connection with a speed of 5 Mbps.

Using a miniature station at home is not cost-effective.

With the help of an Internet amplifier, you can significantly improve the signal quality in the country, at home and in any other room.

Effective devices have been on the market for a long time.

These are the so-called expanders or extenders.

Them the main task- extend the existing signal.

IN countryside or in a place where the network coverage is very poor, it makes no sense to use an extender, since the poor quality of the Internet in this case does not depend on the router, but on the poor network of the operator.

It is possible that there are not enough towers on the territory, the connected ones have a small throughput or the signal is “interfered” by buildings, forests, and so on.

To solve the problem of poor Internet in a private house, we recommend using repeaters - These are special gadgets that can increase the speed of the Internet several times by reducing the signal-to-noise ratio.

You can improve the quality of the network using special kits to amplify the 3G-4G signal.

Content:

When choosing an amplifier kit, you should pay attention to the following parameters:

  • Coefficient signal amplification. It is customary to consider the values ​​\u200b\u200bof the indicator, which are 8 dB and above, as a normal gain level. Such repeaters are perfect for use in areas remote from the city;
  • Frequency range - this is a kind of reproducible band. The larger it is, the more efficient the repeater will work;
  • Attachment type. In order for the amplifier to be able to catch the already existing tower signal, it is necessary to install its antenna as high as possible. As a rule, users choose to install the roof of the house. When buying a product, first decide on the type of fastening, and then select the options that are suitable for you;
  • Kit cable length . It is determined by the peculiarities of the location of all devices of the set;
  • output power (from device to base station).

Also, you should pay attention to the temperature range at which the device will operate in normal mode.

If you live in a region that is characterized by frequent frosts, this indicator will be almost the main one when choosing a gadget.

When choosing an amplifier, consider your location, the approximate distance from the nearest tower to the house, the required number of connection points. Remember that the total baud rate achieved by the amplifier will be divided among all.

Vegatel VT-3 G

Estimated cost: 11 900 rubles.

This cellular signal amplifier is the best in terms of price / quality ratio.

Vegatel is a domestic manufacturer of equipment for strengthening communication different type.

In Russia and other CIS countries, devices from Vegatel are in demand.

The average cost and efficient operation of the device will solve the problem of slow Internet and cellular communications even in the most remote suburban areas.

  • The amplifier is capable of capturing a very weak signal;
  • Easy to operate;
  • The management interface is translated into Russian;
  • There is an overload level indicator;
  • Affordable cost.
  • In the basic configuration there is no bracket;
  • No router.

The direction of the antenna must match exemplary position stations of the used cellular operator.

Telestone TS- GSM 1800

Estimated cost: 15 600 rubles.

Telestone is a Chinese company that deals with . The products are mainly focused on Russian market.

The TS-GSM 1800 repeater model is distinguished not only by its good price, but also by the ability to work with any number of subscribers.

Thanks to a gain of 70 dB, you can achieve good signal amplification without interference, even if 100 subscribers in the house work at the same time.

It should be noted the good build quality of the repeater. The case is designed to support IP40 rating, which allows it to keep out moisture, sand and other fine particles. Suitable TS-GSM 1800 for medium-sized rooms, mainly for summer cottages.

  • The small size of the repeater;
  • The case is protected from ingress of moisture and dirt;
  • Large coverage area, which is suitable for any suburban area;
  • Good quality networks as a result of amplification;
  • Unlimited number of network subscribers.
  • The package does not include cables and antennas. All components necessary for installing the repeater can be purchased separately from the manufacturer or separately;
  • The complexity of installation, because there is no exact instructions with factory components. To configure the operation of this repeater, we recommend contacting a specialist.

The repeater's rugged chassis will handle all weather conditions.

Anytone AT 6100 W

Estimated cost: 37 800 rubles.

This repeater model is the most powerful of all other TOP amplifiers, however, the price of the device leaves much to be desired.

Anytone AT 6100W is more suitable for large enterprises, factories than for giving.

However, if you want to ensure the maximum quality of the connection and the price is not important to you, feel free to choose this model.

IN complete set devices include:

  • The AT-6100W repeater itself;
  • External antenna;
  • Internal antenna;
  • Power adapter;
  • Cable 10 m and 5 m (for external and internal antennas respectively). If necessary, you can buy additional skeins from the manufacturer or pre-order the required quantity;
  • Instructions for use and installation;
  • Warranty sheet. With it, you can exchange the amplifier kit or get your money back if the gadget turns out to be faulty.

Also, the repeater works with the UMTS communication standard (GSM 900 type).

This allows the gadget to work perfectly as a modem.

To connect the Internet to a computer in the country, it is enough to use the Anytone AT 6100W repeater and use a smartphone, or you can work with a 3G modem.

  • Reliability. Using Anytone AT 6100W, you will not encounter constant damage to the antenna or other components of the kit. All details have highest quality and will last for many years even in cold climates or sudden changes weather conditions;
  • Convenient design and ease of use;
  • Works without interruption at temperatures from -25 to +55 degrees Celsius.
  • High price;
  • The device is intended for buildings much larger than ordinary cottages.

Vegatel VT-900 E

Estimated cost: 11 900 rubles.

This repeater is similar to the TOP leader. The only difference is that Vegatel VT-900E does not support WiFi.

Users can only boost the signal for the cellular network.

Accordingly, in the country it will be possible to use only fast 3G Internet.

In general, the Vegatel VT-900E repeater is perfect for amplifying a cellular signal and on any suburban area.

The repeater will work without problems even if the house is in the middle of the forest or far from the base station.

On the body of the repeater there is a key for adjusting the signal level. Also, this parameter can be adjusted automatically.

There is network overload protection. Normal operation of the device is possible at temperatures from +25 to +55 degrees.

Picocell 900 SXB

Estimated cost: 8 200 rubles.

Picocell 900 SXB is a relatively inexpensive and high-quality repeater that works with the GSM-900 communication standard.

Great for small spaces or houses with 1-2 floors.

Allows you to amplify the incoming signal and transmit it to spread it over an area of ​​up to 200 square meters. m.

The peculiarity of this device is that the developer positions the Picocell 900 SXB repeater as a device for signal amplification in the city.

If you decide to choose this device for giving, it is desirable that the house is close to the base station, or to a large locality.

  • Small size;
  • Acceptable price;
  • Low energy consumption;
  • Build quality;
  • Easy to install;
  • Well amplifies the signal on an area up to 150 square meters. m.
  • Designed to work in the city. There is no way to amplify the signal if it overlaps big houses or forest;
  • Limit on the number of subscribers. Up to 15 different devices can use the "enhanced" network at the same time.

Hello dear users! Today, namely in the century information development technology, you always want to have access to high-speed Internet anywhere in the world. But there are places where mobile Internet catches badly, and it is problematic or very expensive to stretch the cable. For example, if in country house or in the country you want to make a high-speed connection, in order to fully use the Internet, you should install, for example, an antenna, which is an addition to the modem.

With proper installation and subsequent configuration, you will receive Internet that will not be inferior in speed to a wired counterpart. You can buy an antenna in a specialized store or online market. In today's issue, we will consider how you can amplify the signal of a 3G and 4G modem with your own hands, for example, in the country or it can be private house outside the city, where, respectively, the signal for the 3g modem barely picks up the signal itself.

In my house, I had to put in a lot of effort to ensure good internet. Therefore, in this article I will share some tips with you and tell you in more detail how to amplify the signal of a 3g modem, and you will also learn how to install, configure and test such an antenna and how the 3G and 4G modem signal amplifies in general.

How to boost 3G modem signal?

So, two months ago, my wife and I bought a beautiful private house, which is located on the shores of a beautiful Ural lake with a beautiful picturesque area. There is naturally clean mountain air and, moreover, it is located away from the bustle of the city, in general, all the amenities for a comfortable life and simple rest, which we dreamed of.

However, due to the remoteness from the metropolis, it was almost impossible to use Internet access at first. The reason for this can be called the absence of the wires themselves for accessing the Internet. After all, the area is just beginning to be equipped and the laying of wires for the Internet is still only in the project of the developers themselves.

As a result, I bought a modem connect megaphone with a decent rate, but wait high speed from such an Internet, one could only dream of. Who has such an Internet, I think they will understand me. It takes too long to load a video or a large page. There were constant connection failures.

In the end, I decided that it was enough for me to burn my nerve cells, it was time to think of something in terms of amplifying the 3g modem signal.

My choice was to install a special antenna. I chose this option because there is no need to make anything here - the device is already ready. Bought, assembled, installed, and then enjoy good internet. The HiTE HYBRID antenna I bought is one of the modern models, thanks to which the signal amplification of the 3g and 4g modem gives a tangible result, take my word for it.

The antenna itself is connected via a single cable through which data is transmitted and power is supplied. It took me about 10 minutes to connect the device.

In short, I can tell you that the signal amplification of the 3G modem is carried out using MIMO technology, which is aimed at improving the stability and quality of the connection. The manufacturer claims that the gain of the device is 2x13 dBi for 3G and 2x16 dBi for 4G. Another advantage of the antenna is that the HYBRID antenna is compatible with all modern routers. You can also connect it directly to a computer or to a modem.

This is how the installation for increasing the speed of the Internet looks like. As you can see, there are few elements here, so the connection will not take much time.

Ultimately, I can tell you that I got excellent results not only in connection speed to global network, but also in the convenience of setting up the device. In general, if you plan to install another antenna to amplify the 4G signal, then I recommend that you familiarize yourself with this material, since these devices work on the same principle.

All necessary components are included in the antenna kit, so you don't have to worry about additional tools for installation.

Future perspective

I made today's instruction in October 2016. Therefore, now the situation is such that all mobile operators are massively switching from the third generation to 4G Internet. Despite the high demand, 4G coverage areas are not found everywhere. Of course, in major cities you can easily connect to a fourth generation signal, but in the countryside 4G may not be available. As in other cases and in our case.

To amplify the signal of a 3G and 4G modem, you can add that the owners of private houses and cottages are faced with a problem when they need to amplify the 3G signal, since there is no other option in their area yet. They buy antenna-amplifiers for 3G, and after 1-2 years they have to switch to 4G and purchase a new device. The HiTE HYBRID antenna is installed with the future in mind, the installation is able to amplify 3G and 4G, and it automatically selects the best signal. Therefore, it is best to buy universal antennas. Despite the fact that the prices for such installations are higher, you will save in the future.

Strengthening the signal of a 3G and 4G modem with your own hands

Connecting and setting up an antenna

So let's open the box. Here you will see the antenna itself, which is a small box and a neatly folded PoE adapter. Also in the box there are mounts for the device, a power adapter and an Internet cable that you can connect to a modem, router or directly to a computer. The set looks like this:

I will tell you frankly that I am holding this antenna for the first time. I want to note that it has a completely sealed case made of plastic and metal. HiTE HYBRID weighs about 2 kg, as for the dimensions, they are 250x250x75 mm. The case has waterproof connectors, so the ingress of liquid will not damage the unit. The antenna is intended for installation on the roof of the house, on the street or on a special mount right outside the window. Thus, you will achieve the maximum gain of the 4G signal.

The installation is not afraid of weather changes, it works stably in heat (up to +50°C) and in frost (from -30°C). The manufacturer of HYBRID claims that the antenna can function even with more low temperatures if you turn off the power in cold weather. Of course, I can't verify this information yet. In the kit you will find a secure mounting bracket.

Also included is a 30m cable. This is ideal for a private home, as you can easily stretch it to the roof. But if you live in high-rise building, you can purchase the 100m cable separately. This cable is intended for data and power transmission - I was pleased with such a simple solution, because you do not have to suffer with extension cords and various adapters. In the HiTE HYBRID kit you will find all the necessary components for installation.

Choosing the right SIM card

As you understand, the antenna is also a modem. You can also connect it to another router. HYBRID will require a SIM card that supports 4G at a frequency of 2500-2700. If you do not have such a card, the antenna will automatically amplify the 3G signal, while the frequency will be 1900-2200. I studied various reviews and came to the conclusion that HiTE HYBRYD will work with all Russian operators providing 3G and 4G mobile Internet. I will perform the test with a 4G SIM card from MegaFon. Let's see what happens and what will be the gain of the 3g modem signal.

The SIM card must be placed in a special slot (shown in the photo), and then securely tighten the waterproof cover. It closes hermetically, so you don't have to worry about the health of your SIM card.

The instructions indicate the address that we need to open on a laptop or personal computer. Here you will see the management interface.

You will also see the connection status and statistics, you don’t need to go into this data too much. The main thing is to check the download and upload speed.

So, we are testing the antenna for signal amplification of the 3g modem.

We need to know how to change the speed after installing the antenna. Before starting the installation, go to this site Speedtest.net

Here you can check current speed internet connection. I compared it with a modem from Megafon, the SIM card was the same. The HiTE HYBRYD antenna is designed for open areas, so the test, taking into account the location of our house in an open area, we can say that it meets the specified criteria.

The first location is in the house under the table

First, I checked the antenna in the house itself, namely near the computer system unit, to find out how the 3g modem signal is amplified if the antenna is not taken out into the street. Put the antenna on the system unit. As a result, the speed test service showed that the incoming speed is 6.21 Mbps, and the outgoing speed is 1.21 Mbps. We can say that this is quite a good indicator.

The second location is in the house by the window

Then I brought the antenna to the window and again measured the Internet speed with the service. In this case, the antenna gave an incoming speed of 8.62 Mbps, and an outgoing speed of 1.05 Mbps. If you do not understand what these numbers mean, then I recommend that you read these articles, here I have already told in detail what these numbers mean:

As you can see, in the second case, the result was much better. The signal gain of the 3g modem in the second case turned out to be much better than 8.62 Mbps. Thus, I can say that in my case, today the Internet works well,

Third location - On the roof of the house

This time I took the antenna out of the house and fixed it on the roof of the house. As a result, the test showed that the higher from the ground, the higher the speed of the Internet. The service with which I checked the connection this time gave the following results: incoming speed 11.95 Mbps, outgoing - 0.44 Mbps.

What else can I say in terms of signal amplification 3g modem?

In general, I had to wait a long time for the modem to load the site where the speed test is being conducted. As for the antenna, everything is already visible here - 11.95 Mbps. This is the best indicator that I managed to achieve away from the metropolis.

The screenshots above show that the use of the HiTE HYBRID antenna significantly increases the signal gain of the 3g and 4g modem. Of course, large web pages and HD videos took a long time to load. Nose social networks there were no problems.

Concluding today's article, it is worth noting that there are many other ways to amplify the signal of a 3g modem. These can be some personal devices, which, by the way, can also amplify the signal by several orders of magnitude or ready-made devices. Here is an example video for you:

So if you have been suffering from a low Internet connection speed for a long time and still do not know how to increase the signal of a 3g modem, then it's time for you to take action on this matter.