Taurus 25-08-2012 23:58

Good day to all present!
What a day, I'm trying to find drawings of the Glock 17 (in detail with all sizes).
I looked in your branch, I did not find it (maybe I was not looking for it). Recently I started to master SolidWorks, for work it is necessary that I independently create the most reliable 3D model of this particular pistol.
Employees of the "authorities" please do not worry - everything is within the law.
I would be very grateful for your help!

technic6 27-08-2012 14:52

But the Colt M1911 won’t fit at all? .. This kind of goodness in bulk ...
I'm afraid that it's unrealistic to find the blueprints for the Glock 17, it's better to switch to something more accessible: STEN, Parabellum, whatever else is there, everything will fit for training ...
Ask around here: people are working, measuring ... Of course, these are not factory drawings, but without fish ... it's good that at least there is ... Maybe they will help in some way ...

Taurus 27-08-2012 15:56

quote: Originally posted by technic6:

find blueprints for Glock 17

Any other Glock model will do (I mentioned the seventeenth only because of its greatest prevalence).
The goal is not to build a 3D model of any pistol, but to master all the nuances of the Glock design (freely navigate in all sizes of all parts).
There are two ways to do this;
1. Making a pistol completely in iron with your own hands (of course, my hands), but this scenario is unrealistic due to the laws of the Russian Federation.
2. Create 3D models of all parts (I will own all sizes), create an assembly (I will know all the nuances of the interaction of parts when the gun is working).

technic6 02-09-2012 16:24

quote: Originally posted by Taurus:
Any other model of Glock will do.

It is unlikely that there will be drawings of any Glock "and (as well as any other modern pistol(and not only...))...
(Across the Internet, a scheme for converting Glock "and to full auto (similar to Glock 18) roams, but there is only a part of the dimensions necessary for conversion, for domestic cars there are some drawings with dimensions in manuals and repair and maintenance manuals, but still Not all...)
Basically, drawings of military models that were produced at many different enterprises (from whose archives all this floated away) or trophy documents spread across the network ... Plus drawings created by enthusiasts (for which HUGE thanks to them!) By measuring samples ... Most of the models created from photographs (by those who could not use the original), the accuracy of such models leaves much to be desired, but ... Well, and reengineering, of course ...
The only way out is if some kind soul takes it upon himself to measure his device and post the drawings (or 3D model)...

quote: ... master all the nuances of the Glock design (freely navigate in all sizes of all parts).

Meaning???...
To study the device and the interaction of parts, the exact dimensions of all parts are optional (reengineering will be more useful) Then create what: Copy?.. Analogue?..
Making a pistol completely in iron with your own hands unrealistic not by virtue of the laws of the Russian Federation, but because of the completely inadequate material costs for equipment, tools, tooling ... We consider: CNC lathe and milling machines, universal grinding, honing (or honing head), horizontal rotational forging machine (with a mandrel) (well, let there will be a trellis, but it also needs to be done), an injection molding machine with a manipulator (and a mold for it (and it needs to be done)), bending and punching dies for inserting and USM parts (and, accordingly, a press), well, springs can be wound on lathe, heat treatment equipment plus coatings... However...
Getting the Glock itself, and any model, will cost much less, and even in compliance with the laws of the Russian Federation (I think your awarding the selected Glock model on behalf of a foreign state will cost an order of magnitude less than all of the above) ...

In the 80s of the 20th century, the Austrian military department announced a competition for the creation of a new pistol model. The new weapons were supposed to be more practical and better in all respects than the old weapons. Important criteria were reliability and ease of use.

appearance pistol Glock-17

Several large arms companies took up the right to fulfill the departmental order. Showcasing various models small arms, the Glock GmbH company provided a model of its Glock-17 pistol for public viewing and, by the 82nd year, it was recognized as the best of the best, and subsequently adopted for service with law enforcement agencies.

Peculiarities firearms

Small arms were so well thought out that they contained all the qualities necessary for the defense department. The main distinguishing feature is the materials used. The frame of the pistol with a handle was made of a polymer material that could withstand temperatures of 200 degrees Celsius, and was also not afraid of physical impact. All this gave the firearms the necessary margin of safety, despite its low weight.

A design feature of the Glock-17 is the presence of a special valve in the chamber from below. Thanks to him, in the event of excessive pressure, due to the influence of powder gases, they are removed through the pistol grip. The design feature of the casing is U-shape designs.

On the surface of the gun there are the following factory markings:

on the casing - shutter and frame on the right on the casing - shutter on the left

A standard firearm magazine holds 17 rounds of . They are arranged in two rows in a checkerboard pattern. There are modifications of magazines for 33 or 10 ammunition. The latch that holds the magazine at the base of the handle is located at the point where the trigger guard and the handle of the weapon join.

Glock-17 firearms do not have a standard system fuse. Safety when using a pistol is ensured by a special system that has three independent automatic type fuses. The entire system is turned off during the application of force on the trigger. There are several types of fuses in the security system:

• trigger;
• combat;
• shockproof.

Used as an aiming system in small arms open type sight, the main elements of which are fixed on the flat surface of the shutter. The sighting system consists of a front sight and an interchangeable sight. The front sight has a special luminous marker, the slot in the sight also has a pleasant illumination.

Basic TTX pistol Glock-17 are presented in the table

As mentioned earlier, the frame of the firearm and the outer part of the body is made of a special polymer material - plastic, which can have different color shades. As a rule, the main color is black. However, it can be replaced with other colors. In places of heavy load, special iron inserts are mounted in the body of the pistol, which increases the strength of small arms.

The work of parts and mechanisms of weapons inevitably leads to the formation of unique traces of a shot on the ammunition. Traces characteristic of the Glock-17 pistol are presented below:

trace: 1 - reflector, 2 - the edges of the window in the shutter under the striker, 3 - ejector hook,
4 - striker (shape - rounded rectangle)

On the one hand, an additional dynamic trace from the tip of the striker adjoins the striker trace, which is displayed in the form of traces, the specified trace is formed when the barrel swings in a vertical plane.

Advantages and disadvantages of firearms

The assembly of the Glock-17 uses a large number of polymer parts, which avoids the adverse effects of corrosion. Also, the barrel undergoes a special processing technology. Polymer parts make it possible to achieve smoothness during firing, which, of course, increases accuracy.

The characteristics of the material make it possible to use small arms without much difficulty in any climatic conditions, with the exception of the far north and areas with sharp temperature fluctuations.

The weight of the Glock-17 is slightly less than that of short-barreled weapons of a similar class. This makes the new weapon a bargain, practical and easy to handle. The process of disassembling the gun does not require special tools.

The disadvantages include the fact that the ingress of various debris between parts of the mechanisms can lead to jamming of the gun during firing. Some experts do not consider the probability of jamming due to small debris to be too great. In order to avoid this, it is enough to periodically clean small arms.

The characteristics stated high rates of temperature effects on the Glock-17 pistol. However, at -40 degrees, small arms become brittle. And at a temperature of more than 200 degrees - parts and mechanisms can be deformed.

Glock 17 (Glock 17) is an Austrian pistol developed by Glock for the needs of the Austrian army. He became the first type of weapons developed by this company. The resulting sample turned out to be quite successful and convenient to use, thanks to which it was later adopted by the Austrian army under the designation P80. Due to its combat qualities and reliability, it has become widely used as a civilian weapons self defense.

Glock 17 pistol - video

Glock produces modifications of this pistol in various versions under different cartridges, for example: 9x19mm Parabellum Glock 19, .40 S&W - Glock 22, 10mm Auto - Glock 20, .357 SIG - Glock 31, .45 ACP - Glock 36 and .45 GAP - Glock 37.

A design feature of the pistol is the absence of a fuse box and a trigger. The gun is mostly made of high-strength heat-resistant - up to 200 ° C - plastic. This makes the Glock 17 lightweight and extremely durable. The principle of operation is “grab and shoot”, there is no fuse, however, the shot will not occur without fully pressing the “safe action” trigger. It consists of 33 parts, and partial disassembly is carried out in seconds.

Story

After the end of World War II, the Austrian armed forces were armed with two main models of pistols Colt M1911A1 and Walther P38. The Austrian police were equipped with Walther PP and Walther PPK military and even pre-war years of production or issued in post-war years under license in France. To resolve the situation in 1980, it was decided to announce a competition for a new pistol to equip the Austrian police and army.

The following requirements were imposed on the contestants:

Ammunition type: 9x19mm Parabellum;
— minimum magazine capacity: 8 rounds;
- the ability to control the gun with the right and left hand;
- quick bringing into combat position (without the need to switch the fuse);
- the possibility of assembly and disassembly without special equipment, the number of parts in the gun - no more than 58;
- all parts must be interchangeable within the same model without mutual adjustment;
- for 10,000 shots there should be no more than 20 delays;
- the gun should preserve the integrity and functionality as much as possible under external influences and temperature changes;
- maximum safety for the user: the shot should not occur when hitting a steel plate after falling from a height of 2 meters.

Various weapons manufacturers took part in the struggle for such a promising order. Among them was the then little-known company Glock, founded in 1963 in the town of Deutsch-Wagram, located near Vienna. At that time, the company was engaged in the production and supply of sapper shovels, bayonet-knives, belts and various ammunition for the Austrian army. Back in the mid-1970s, Gaston Glock, the founder and owner of the company, set the task of creating the simplest, most effective and reliable pistol for his designers.

Using the existing experience in the use of polymers in the manufacture of weapons, the Glock 17 pistol was created. The fundamental innovation of this model was the widespread use of polymer materials in its design, mainly impact-resistant polyamide was used. In 1982, according to the results of military tests, the Glock 17 pistol was adopted by the Austrian army under the designation P.80. Glock was ordered 25,000 pistols, production facilities were not ready for such a significant order, so subcontractors were involved until the full deployment of their own production facilities.

Around the same time, the pistol was presented, along with samples from other manufacturers, to participate in a competition called "M9" for the rearmament of officers and non-commissioned officers of all types with personal service weapons. armed forces USA (in the end, the Beretta model won).

Pistols submitted to the M9 competition

Soon after the arrival of the new pistol to the Austrian troops, this model gained considerable popularity, which prompted the Glock company to further expand and improve the model range, but the design of the existing pistol models of this company still retains those successful technical solutions that were first successfully used when developing the Glock 17 pistol.

The name "Glock 17", the pistol, most likely owes to the serial number (No. 17) of the package of technical drawings of the company, eventually accepted for production.

Production generations and variants

To date, there are four production generations of the Glock 17. Buyers are offered a choice of third or fourth generation pistols, the same applies to most other Glock models, but some models (Glock 17L, Glock 24, Glock 25, Glock 28, Glock 36, Glock 38, Glock 39, Glock 42, Glock 43) are offered only in the third generation, and some (Glock 40 and Glock 41) only in the fourth.

First generation

Pistols of this generation were produced until 1988, mainly for the Austrian army. They were distinguished by a handle with a uniformly distributed rough texture. In total, about 500,000 copies were produced.

Second generation; second and a half generation

The second generation Glock appeared in late 1988, early 1989. On the front and rear surfaces of the handle, corrugations began to be made in the form of small square protrusions forming horizontal and vertical lines, which increased the reliability of holding the pistol in the hand. The same corrugation is available on the front surface of the trigger guard. The second generation pistols were adopted by the FBI, the Finnish police, the armies of Norway and the Netherlands. After some time, sub-finger recesses began to be made on the front surface of the handles, this option was designated generation 2.5. Some authors prefer to call this frame an early version of the third generation.

third generation

The third generation, in addition to the corrugation and sub-finger recesses, also received a mount for underbarrel flashlights and laser designators, and in addition, an additional (second) pin that fixes the locking block (a metal insert in the case with a cross member, which, interacting with the figured cutout of the tide of the breech breech, leads to its lowering, and as a result - the disengagement of the barrel from the bolt). This change was made so that the locking block could withstand the recoil of the powerful .357 SIG rounds introduced from this generation. While the 9mm models didn't need this reinforcing pin, they did get one to unify their processes. In the upper part of the handle, they began to make a recess for the thumb, bounded from below by an elongated protrusion.

As an option, third generation pistols are available in RTF2 (Rough Textured Frame). The handle of the pistol in this version is covered with convex points that increase the reliability of holding the weapon, including if it is wet. There are 64 points per square centimeter of the RTF2 frame surface. On the other hand, the constant wearing of a pistol in this version, for example in an underarm holster, leads to accelerated wear of the fabric of clothing in contact with the handle. In this regard, RTF2, for all its merits, is unattractive for professional bodyguards working in expensive suits.

fourth generation

The fourth generation has the most significant innovations among all existing generations. The handle is standard RTF, but compared to the RTF2 pistols of the third generation, there are larger gaps between the points - 25 points per cm², instead of 64 for the RTF, and the points themselves are larger.

The back of the handle is made in the form of a separate interchangeable part called the "back plate" (back strap). A part of the minimum size SF (short frame) is installed as standard, in this case the distance from the back of the handle to the trigger is 70 mm. The gun comes with two additional parts M (medium) and L (large), which can be installed instead of the standard one. Detail M increases the distance to the trigger up to 72 mm, L - up to 74 mm. Thus, they allow better grip ergonomics for shooters with longer fingers. To change the part, you need to remove the mounting pin, for which a special tool is provided in the kit.

The store latch button has become larger and more convenient. It also became possible to rearrange it to the right side (more convenient for left-handed shooters). In this regard, a second window appeared on the magazines of the fourth generation pistols under the latch tooth, on the right side. Previous generation pistol magazines can be used in fourth generation pistols, but only if the button is set to the left.

Instead of one return spring, fourth-generation pistols began to install two springs of different diameters (on the same guide rod). In this case, the load arising from recoil is distributed more evenly, the survivability of each individual spring increases, and the recoil felt by the shooter decreases.

Unlike previous generations, the fourth has a corresponding marking on the shutter - Glock 17 Gen4.

Design

This type of pistol is a fairly simple and reliable design, consisting of 33 parts and can be disassembled without the help of special equipment.

Pistol automation

The automatics of the Glock 17 pistol work according to the scheme of using recoil with a short barrel stroke. The design used a modernized system Colt-Browning (Brauning Cam), which is a modernization of the Browning earring. Under the breech, a tide is made with an inclined groove, coinciding with the guide ledge of the frame. The groove is made at such an angle that, moving along the ledge, it causes the moving barrel to decrease, due to which the latter disengages from the shutter-casing, and then stops, allowing the shutter to roll back unhindered.

The barrel bore is locked by means of a descending breech, which enters with its rectangular protrusion located above the chamber into the window for ejection of spent cartridge cases of the shutter-casing. The decrease occurs when the bevel of the lower tide of the breech breech interacts with the protrusion of the frame. After the shot, the bolt, moving backward, bends the uncoupler, thereby releasing the thrust, which then rises under the action of the thrust spring. When the bolt moves forward, the striker's hook encounters the thrust hook and returns the trigger through the thrust to the forward position. In this case, the drummer is pre-cocked. Pistols latest releases are equipped with an ejector, which also acts as an indicator of the presence of a cartridge in the chamber.

trigger mechanism

The trigger mechanism (USM) of the striker type with a preliminary partial cocking of the drummer when the shutter-casing moves back and additional cocking when the trigger is pressed. When the trigger is pressed, the firing pin block is first removed, then the sear releases the combat platoon, and a shot is fired. Glock calls the trigger of this design only self-cocking (DAO). However this system in fact, it is a classic single-action trigger with an additional firing pin.

In Glock pistols, the drummer is cocked by moving the shutter-casing back, and the relatively long trigger stroke and slightly more than a conventional single-action trigger, the force required to cock the drummer, replace the manually controlled fuse. To ensure maximum ease of handling weapons in the design of this pistol, it was decided to abandon the use of manual safety catches, only automatic ones were left, which made it possible to significantly reduce the time interval from the moment the pistol was removed to the moment the fire was opened.

In the absence of cartridges, the shutter delay is turned on, fixing the shutter in the allotted position. The length and force of the stroke in this case prevent an accidental shot in the absence of a safety lever. The trigger pull is 2.5 kg and can be adjusted from 2 to 4 kg. A small effort required to pull the trigger allows you to increase the accuracy of fire even for a poorly trained shooter.

Circuit breakers

The gun is equipped with three independently operating automatic safety locks. Glock called this system Safe Action. The safety lever, which is equipped with the trigger, blocks its movement back and releases it only when the shooter is consciously pressed. The automatic fuse of the striker makes it impossible for the striker to hit the primer of the cartridge in the event of an accidental failure from the cocking sear. The trigger rod, with its special protrusion, raises the fuse, which is a cylinder with a groove, and opens the way forward for the drummer. The shockproof fuse is a protrusion of the trigger rod, which has a cruciform shape, which is included in the groove of the shutter-casing. It prevents the combat platoon from falling off the sear during an external impact.

Sights

The sights of Glock pistols, made of plastic, are removable and installed in transverse dovetail grooves, consist of a rear sight with the possibility of making horizontal adjustments by shifting it and a front sight, which can be replaced with another one with a different height for vertical correction. For ease of aiming in conditions low light a luminous dot is applied to the front sight, and a luminous frame is applied to the rear sight. The rear sight can be adjustable, but this is not usually the case in military models. Since 1988, pistols of this model in most cases are equipped with a special guide for attaching a laser target designator (LTC) or a tactical flashlight.

Design features

The gun has a simple and reliable design. When completely disassembled, it consists of 33 parts, including a magazine. Maintenance can be carried out without the use of special equipment using improvised means, which greatly facilitates maintenance and repair. Equipped as standard with a 17-round magazine; can also use magazines with a capacity of 19 and 33 rounds. In addition to the generally accepted design features, the Glock 17 has a number of specific technical solutions, which were then used in the pistols of subsequent models.

Many parts of the pistol were created using polymer materials, including the frame (except for the barrel and bolt cover), which made it possible to reduce the weight of the weapon to 900 g in running order (for comparison: the weight of the Beretta 92 pistol with a magazine of 15 rounds is 950 g . in unloaded state). Moreover, the mass of the equipped store in the Glock 17 is 250 g, that is, about 25% of the weight is ammunition.

A distinctive feature of Glock pistols is also the high survivability of components and mechanisms. On average, a pistol is considered wear-resistant if it can fire about 30-40 thousand shots, and 300-350 thousand shots can be fired from the Glock 17. Such superiority in wear resistance is due to the extensive use of polymer parts and the unique barrel manufacturing technology patented by Glock.

The outer body and frame can be made of plastic in various colors. The most famous is classic black, there is also a Glock 17 in camouflage. In the production of parts that are subjected to the greatest stress, plastic is reinforced with metal plates. The guide frames along which the shutter casing moves are reinforced with steel inserts. At the bottom of the frame is a small metal plate stamped with the gun's factory serial number. On the pistol frame above the trigger guard on both sides there are latches, when pressed, incomplete disassembly of the pistol, removal of the bolt barrel and return spring from the frame becomes available.

Shooting underwater

An interesting feature of Glock pistols is the ability to fire underwater. In this case, not only rupture, but also swelling of the trunk does not occur. However, for stable operation of the primer, a special striker with transverse grooves or a set of Spring cups amphibia is required: the mainspring of the striker with a plastic pallet with holes. Available only for pistols chambered in 9 mm Parabellum. However, for firing under water without the risk of blowing the barrel, the use of cartridges with FMJ-type full-shell bullets is recommended. Glock pistols allow shooting underwater at a depth of up to three meters. The bullet retains great energy at a distance of up to two meters when fired at a depth of one meter. Shooting is also effective. close range from under the water, while the sound of a shot is not audible.

Existing modifications manufactured by Glock

Glock pistol 17 served as the basis for the entire range of pistols manufactured by Glock. Glock pistols, which have the “C” index in the model designation, are equipped with a built-in compensator, made in the form of several upwardly directed holes located at various intervals in the muzzle of the barrel, and an elongated cutout in the upper part of the casing-bolt. The presence of this device made it possible to reduce the recoil when fired, which somewhat increased the accuracy of fire.

The following derivatives of the Glock 17 pistol currently exist:

Glock 17L- the target version of the model with an elongated barrel, appeared in 1988.

Glock 17C- modification equipped with a compensator cut in the barrel and casing.

Glock 17R- a variant of a pistol for training without cartridges with a red plastic case. Does not allow shooting, but practice/laser ammo can be used. The drummer himself is put on a platoon after each descent (Reset trigger).

Glock 17T- option with a blue body for training. Shoots markers with paint (Training).

Glock 18\18C- modification adapted for firing bursts.

Glock 19\19C- compact model with a shortened barrel (102 mm). Initially called Glock 17 Compact, since 1990 it has acquired the current designation.

Glock 20\20C- modification of the Glock 17 chambered for 10 mm Auto, has a magazine for 15 rounds and a built-in compensator.

Glock 21\21C- modification chambered for .45 ACP, in this regard, it has a number of design differences. The profile of the barrel has changed, which has become octagonal with right-hand cutting, the magazine capacity has decreased to 13 rounds.

Glock 22\22C- modification chambered for .40 S&W. This model was released in 1990. In May 1997, this model was adopted by the FBI as a service weapon. It is a standard weapon for duty officers.

Glock 23 pistol with tactical flashlight and laser pointer

Glock 23\23C- a shortened version of the Glock 22, is a regular weapon of operational staff.

Glock 24\24C- target modification of the Glock 22 with an elongated barrel and increased accuracy of fire.

Glock 25- modification of the Glock 22 model chambered for 380 ACP, a compact low-power weapon for civil self-defense. First presented to the general public in 1995.

Glock 26- a compact version of the Glock 17 with a magazine capacity of 10 rounds and a weapon length of 160 mm.

Glock 27- compact modification chambered for .40 S&W. Much like the Glock 26, but has a 9-round magazine due to the slightly thicker ammo used.

Glock 28- compact modification of the Glock 25.

Glock 29- a compact version of the Glock 20 model with a magazine capacity of 10 rounds.

Glock 30\30S- a compact version of the Glock 21.

Glock 31\31C- modification original model chambered for .357 SIG.

Glock 32\32C- a slightly shortened version of the Glock 31 pistol with a smaller magazine.

Glock 33- a significantly shortened and reduced modification of the Glock 31, positioned as an "ultra-compact pistol".

Glock 34- target modification of the Glock 17 pistol with an elongated barrel and increased accuracy of fire. Introduced to the public in 1998.

Glock 35- target modification of the Glock 22 pistol, has an increased accuracy of fire, is specially designed for bench shooting and training of personnel. Introduced to the public in 1998.

Glock 36- a compact modification of the Glock 21, the magazine capacity is only 6 rounds, due to their single-row arrangement it has a small thickness, which facilitates covert carrying.

Glock 37- modification of the original model chambered for .45 GAP; magazine capacity 10 rounds.

Glock 38- slightly shortened and with a smaller capacity magazine (8 rounds) modification of the Glock 37 pistol chambered for .45 GAP.

Glock 39- a significantly shortened and reduced modification of the Glock 37 chambered for .45 GAP, positioned as an "ultra-compact pistol" (SUBCOMPACT).

Usage

Due to its successful design, the pistol has become widespread throughout the world. Various modifications of the Glock 17 pistol are in service with the army and police in more than 30 countries, such as Austria, Sweden and Norway. The model is approved by the NATO leadership as one of the main types of personal small arms, "Glocks" various modifications are in service with the police and intelligence agencies of the United States, Canada, Mexico, India, the Philippines, Saudi Arabia and many other countries.

This pistol is a typical self-defense weapon. Maximum effective range shooting range is 50 m, effective shooting at such a distance requires good shooting training and experience in handling the weapon from which the fire is fired. On average, the Glock 17 is most effective at a distance of 20-25 m, due to the fact that even a poorly trained shooter is able to hit a target at such a distance. starting speed a bullet fired from a Glock 17 at the muzzle is 350-360 m/s. The muzzle energy is about 500 J. These characteristics determine the scope of this weapon model.

The energy of a bullet of 350-400 J is enough to inflict serious injury upon impact. The 9mm bullet has a pronounced stopping effect, which allows the shooter to inflict incapacitating, but not fatal, wounds. This quality is especially necessary for police and intelligence officers in cases where you need to stop the target, but there is no need to kill him. In the event that the enemy is protected by body armor, hitting the chest plate of the armor leads to strong concussion, and in some cases to loss of balance, which gives the shooter time to transfer fire to parts of the body that are not protected by armor.

Glock 17 can be effectively used in almost all climatic zones, with the exception of the Far North and areas with sharply continental climate where the air temperature can drop below −40 °C. This is due to its design features. Due to the wide use of polymers, this model is not afraid of the traditionally dangerous for pistols high humidity, dust, jungle and rainforests. But at low temperatures, the plastic frame of the pistol turns from an advantage into a disadvantage due to the increased fragility of the plastic; components and assemblies of the gun fail faster, and without proper regular Maintenance with the replacement of plastic components in critical situation the gun may be incapacitated.

The initial velocity of the bullet, like all pistols, is relatively low, which limits the effective range of 50 m.

In law enforcement forces, the Glock 17 is used as the main weapon on peacetime patrols.

In army structures, the Glock 17 is an additional weapon for officers, in some cases sergeants. They can also arm the crews of vehicles. In combat conditions, the Glock 17 is effective for self-defense when it is impossible to use the main weapon.

It is thanks to the fact that the Glock 17 effectively copes with the tasks in all three main areas of its application that it has become so widespread in the world.

Advantages of the Glock 17 pistol

High resistance to corrosion, thanks to the use of a special patented Glock technology for processing barrels and a large number of polymer parts.
- Smooth recoil and high accuracy of fire, thanks to the use a large number polymer parts.
- Less weight than pistols of the same class due to the manufacture of the body and frame of the pistol from plastic.
- High wear resistance of units and mechanisms. The barrel before burning out allows you to make 300-350 thousand shots (for other pistols, on average, this value is 40-50 thousand shots).
- Bringing into combat position does not require switching any fuse.
- Declared by the manufacturer the possibility of firing at aquatic environment without damage to the gun when changing the return spring.
- The gun can be easily disassembled for cleaning and maintenance without the use of special equipment.
- Ability to use stores with big amount cartridges.
- This pistol has a comparatively larger handle slope than other pistols, which makes shooting more comfortable.

Disadvantages of the Glock 17 pistol

There is a possibility that when carried in a pocket for a long time without regular maintenance, small debris can jam the firing pin release lever, making it impossible to fire. But, according to some sources, this event is too unlikely to affect the actual combat capability of the pistol.
- Shutter guides, having a small area, wear out quickly, which leads to a gradual deterioration in accuracy and accuracy of fire due to the rocking of the bolt frame.
- Low resistance of important pistol components to high rates of fire.
- With prolonged use, microcracks in plastic almost inevitably appear.
- The standard front sight is too wide and covers the target.
- Like all pistols with a plastic frame, it requires a confident hold of the weapon to ensure the operation of the automation.
- The trigger mechanism does not allow re-pricking the cartridge primer in the event of a misfire - you need to pull the bolt. The disadvantage is conditional, with a small number of cartridges. In general, when shooting, the cause of a misfire is not important - the way to eliminate it is important. In the presence of cartridges, it is easier to pull the bolt than to cock an open trigger, not knowing whether the striker will prick the primer of this cartridge, provided that it has not been pricked for the first time.
- Due to the use of polymer materials, the Glock becomes more brittle at temperatures below -40 ° C, which can lead to cracks in the receiver and frame under mechanical stress. At high temperatures- over 200 °C - deformation of the plastic components of the pistol may occur. In the technical recommendations of the Glock company, the operating temperature range is specified from -40 to 200 ° C, the use of a gun outside this temperature range can lead to failure of its main components and structural components.

Curious facts

A widely advertised feature of the Glock 17 is its ability to fire under water when retrofitting the pistol with a special reinforced return spring. This effect is achieved due to the strength of the barrel and simple and reliable automation that does not use complex gas exhaust systems, and replacing the standard return spring with a reinforced one allows you to return the bolt back to the firing position even with a significantly increased environmental resistance. The practical value of this ability is low - this is due to the fact that in water the energy of the bullet is extinguished very quickly due to the high density of the medium, and the effective firing range does not exceed 1-2 meters. But despite the low efficiency of the pistol in this situation, the very presence of this ability indicates the high reliability and wear resistance of components and mechanisms, the preservation of the combat capability of the Glock 17 in conditions of any, arbitrarily high humidity, and even the ability to fire when there is water in the barrel bore , which for many other models of pistols can lead to barrel deformation or serious damage to the components and parts of the weapon.

". Instead, an ordinary engineer with experience in polymer materials wanted to design a pistol that met the strict criteria of the Austrian army, to replace the outdated designs that were in service.

The first version of the pistol project called "Patent No. 17", now known to all gun lovers as Glock 17 caliber 9×19, won in 1982 and soon became the most sought after pistol in the world. Glock 17 still remains the standard weapon of NATO troops.

Millions of people around the world trust their lives to the quality of handguns. Glock but are usually mutually exclusive.

There are no perfect ways to satisfy every customer, but thanks to Gaston Glock, every gun owner Glock can, based on its polymer platform, assemble its own, unique pistol to suit its needs. Exists great amount modifications Glock 17, from adding a night sight to changing the trigger pull. People create their own "perfect gun" in parts, like a plastic surgeon restores the face of a patient after an accident.

While some modifications require the input of an experienced gunsmith, most upgrades are available to even the average gun wielder in a matter of minutes. Knowing this, I article author, Dusty Gibson — ed.) eagerly set out to find and test the most popular modifications for pistols Glock that improve this polymer "miracle".

Aim

So, the first thing I thought about was the scope. Standard front sight and rear sight Glock 17 made of plastic, which in itself is not so bad, but if you are a shooter or a person who constantly carries a weapon, this option is not suitable for you. Plastic sights quite suitable for shooting, but with frequent removal of the pistol from the holster and during transportation, they wear out over time, which can become a problem. In addition, at night, standard plastic sights with not very bright paint is practically useless.

Well, there is a way out: on the right you can see the metal sights from company Trijicon; the model in the photo is called GL11. Trijicon sights with bright tritium grades are made of metal, have good resistance to mechanical stress and are clearly visible in the dark, just what a shooter needs.

Installation of such sights usually does not require the use of a gunsmith, you can install them yourself with the usual tools and a steady hand.

The next thing I noticed was...

Trigger

Regular trigger, which is factory installed, is very comfortable and meets the requirements of most shooters for weapons to be worn all the time. The trigger pull is 2.5 kg, which is quite reasonable and safe.

The site GlockTriggers.com presents several systems for various purposes for modifying your Glock 17. Including the system EDGE approved by sport shooting associations IDPA And USPSA. This system features a trigger load of just 1.6 kg and greater durability, allowing you to achieve best results in shooting competitions. There are 7 parts in the kit, but it is quite possible to install it in just 15 minutes.

pistol grip

Different arrows improve in different ways pistol grip. Make the handle wider or rougher for a more secure grip. Someone uses ordinary self-adhesive skateboard skin, cutting it into shape. But a more suitable option are special granular or rubberized pads, such as from the company Talon. These covers are easy to install with a regular hair dryer.

To avoid injury from improper grip by firm Grip Force Products adapter is produced GFA, which is installed directly on the pistol grip using a special clip.

And now…

Trunk

Usually shooters have no complaints about the quality of factory trunks companies Glock but if you want to install muzzle compensator, muffler, or use a different caliber, you will definitely have to replace trunk, and in the case of a change in caliber, often a store.

Some shooters also use stainless steel barrels such as Lone Wolf And Storm Lake, which improves barrel durability and accuracy when using other ammunition.

Replacing the barrel does not require special skills and is easily done by anyone.

Shutter Reset Button

Usually shutter release button very tight, especially on new pistols, and has a low profile that can be uncomfortable.

It is quite easy to replace it with a high-profile one, such a button is included in the standard package. Glock 34 And Glock 35. Since the main components of pistols Glock identical in all models, you can easily buy a spare shutter release button from Glock 34 or Glock 35 and install it on your pet Glock 17 th model.

Magazine reset button

In the first 3 generations of pistols Glock magazine reset button was low-profile, which did not always suit. Noting this, the company Glock used a high profile button in the 4th generation of pistols, which also did not please everyone, and some owners complained about its sharp edges. You can’t please everyone, and if you are unhappy with the regular button, then you should pay attention to magazine reset buttons from firms TangoDown or JP.

Shop

This seems to be the simplest modification to your pistol. For Glock 17 there are many different stores: high capacity, increasing the grip area of ​​the handle, as well as with increased weight, for easy falling out of the shaft shop, which saves important fractions of a second in shooting competitions.

So, we come to the last improvement in our list today and it is installed on underbarrel rail.

Lantern and LCC

Such rails appeared in the 3rd generation of pistols. Glock in the late 90s.

All sorts of flashlights and laser sights can be mounted on the rail-bar, and the installation of a mini-knife has become a recent fashion.

One of the options for a multifunctional device for rails is a complex device Viridian C5L, including a fairly powerful flashlight at 100 lumens and bright 5 mW green laser pointer , which is visible during the day at a distance of 90 meters, and at night for all 1.6 kilometers.

All this many improvements can be useful for you, so without wasting time, buy and install what will make your Glock more perfect.

legendary pistol Glock is of increasing interest in Russia, it is used both for sports (without the ability to take a pistol home from a shooting range) and by special services. Since we are trying to keep up with modern trends, we consider it necessary to tell you about four very interesting models of this pistol. Glock 17, Glock 19, Glock 26, Glock 34- all these models are structurally very similar, many of their spare parts are interchangeable, and the caliber for all is 9x19 Parabellum.

Studying the awareness of our fellow citizens about this wonderful pistol, we noticed that Glock 17 is often confused with Glock 19, and very few people have heard about models 26 and 34. In this article, we will collect information on Glocks 17, 19, 26, 34 in one place, see how the pistols differ and which one was originally designed for what.

Glock 17 was developed by Glock specifically for the Austrian army, later the pistol was adopted by the armies of several more countries, entered the FBI, the police and was put on sale among citizens of countries where the COP was legalized.

Video diagram of the Glock 17

Generations (generations) of the Glock 17 pistol

Since the pistol was launched into the series in the early 80s, and the requirements for weapons have been constantly increasing since then, the company had to periodically make changes to the design to keep up with the times. Total in currently there are 4 generations of Glock 17, moreover, now in the wide sale of zero Glocks (not secondary) there are pistols of only 3 and 4 generations, that is, Glock 17 Gen3 and Glock 17 Gen4. Let's take a closer look at what's happening with generations.

Glock 17 Gen1

The main consumer of the first generation Glock 17 was the Austrian army. Pistols were produced until 88. The main visual difference of the 1st generation can be considered a handle without recesses for fingers and the absence of corrugation on the back and front of the handle.

Glock 17 Gen2

Corrugation appeared on the front and back parts handles, pistols began to actively enter the FBI, the Finnish police and some European armies. Later, subfinger recesses appeared on the handle - this is also the second generation.

Glock 17 Gen3

If the first generation differed slightly from the second, then Gen3 introduced a bar for flashlights or a laser pointer, an additional pin that holds in place a part installed in a frame that interacts with the barrel. In addition, depressions appeared on the top of the handle, which allow you to better hold the gun. Guns Gen 3 can be found both standard and with a notch on the handle type RTF2 (Rough Textured Frame). This notch increases the confidence of holding the gun with wet hands, but causes discomfort when wearing the gun while wiping clothes.

Glock 17 Gen4

Visually, Glock Gen 4 differs from Gen 3 primarily in the inscription on the shutter “GEN4”, the RTF surface (large dots, rarely stand) and not RTF2 (small dots, often stand), and interchangeable “backs” of the handle: the back is thin from the factory, for those who are uncomfortable, they take a thicker or very thick back from the kit and put it on themselves. Besides Glock 17 Gen4 has an extended magazine reset button that can be rearranged to the other side (finally by the 4th generation they thought about lefties). After moving the magazine reset button to the right side, magazines from previous generations no longer fit. Instead of one bolt return spring, two springs are put on the rod, which increases the resource of each of the springs and reduces the pistol toss after firing.

The Glock 17 model is, as it were, the base one, many Glocks of various calibers have been developed on this basis, but we will talk about the Glock 19, Glock 26, Glock 34 in 9x19 caliber.

Glock 19

In fact Glock 19 is a more compact version of the Glock 17 pistol, the barrel has been reduced (102 mm instead of 114 mm for 17) and the handle, which is standardly designed for a 15-round magazine (instead of 17 for Glock 17). Otherwise, the pistol is almost completely identical to the Glock 17. It is popular with the police, special services, and citizens. It is a very balanced model in the sense that it is quite convenient to carry it hidden, but it has sufficient accuracy and power: that is, the golden mean between a military pistol and something subcompact.

Glock 26

A sub-compact pistol based on the Model 17, but more stripped down than even the Model 19: the barrel Glock 26 88 mm long, and a 10-round magazine is standardly placed in the handle. It was developed for the civilian market, but is also in some demand among employees. This pistol is so short that a telescoping recoil spring had to be developed. The rest of the design is the same Glock 17.

Glock 34

Version of the Glock 17 with an elongated barrel and a cutout in the front upper part of the bolt. The barrel length is 135 mm, which is 21 mm more than the base model 17, the bolt and return mechanism have been changed accordingly. Otherwise, the pistol is identical to the Glock 17. Pistol Glock 34 was created for sports, but also came in handy in the armies and special forces of Malaysia, the USA and Chile.

In the following materials, we plan to talk about tuning Glock 17, Glock 19, Glock 26, Glock 34:

Fortunately, a huge number of tuning kits are suitable for all these pistols, because they are developed on the same basis.