Now it is possible to order authorized tokens of the State Fire Service of the Ministry of Emergency Situations of Russia, the Russian Armed Forces, the USSR Armed Forces, the Ministry of Internal Affairs of Russia and any other tokens with delivery to any regions of the Russian Federation.

All tokens are made by diamond engraving and pass any checks.

The cost of delivery of tokens, which is carried out by the Russian Post, is 600 rubles, and the shipment is carried out with the full prepayment of the order.

To order a token, you must write to the post office -, be sure to indicate in the letter - the type of authorized token, photo, personal number of the token, your full address, postal code, and phone number. Tokens are made and shipped within 24 hours after payment.

Delivery times vary from 3 to 10 business days, depending on the distance. locality. The number of the mail identifier is also sent within 24 hours after payment.

Making duplicate tokens to order

A token is a metal badge that indicates the affiliation of its owner to any society, or is issued in memory of an event. Any image can be applied to the surface of the token, and on both sides. The result is a rather original souvenir. There is also a variety of army tokens, tokens of various services, such as the State Fire Service of the Ministry of Emergency Situations, the Ministry of Internal Affairs, the FSB. This gift will be especially appreciated by people who prefer military style. In our engraving workshop, you can order a token with any image, logo of your company, or you may want to engrave an inscription about some important date on the token.

If you do not know what to give your loved one, but want to give him something worthwhile and memorable, then an engraved token is a great gift! Making an engraving in the form of a picture, date, address on a token would be a great solution. We can offer to make a token with an engraving for your pet, with the specified address, phone number, so that if it suddenly gets lost, it will be immediately found.

Production of tokens of the State Fire Service of the Ministry of Emergency Situations of Russia

Making tokens of the State Fire Service of the Ministry of Emergency Situations is a rather laborious work, and few people are engaged in the manufacture of these tokens, since it is quite difficult. EMERCOM tokens are made from special blanks of ellipsoidal stainless steel with a thickness of 1.5 mm, and then the necessary engraving is applied to them. In our engraving workshop you can order a token of the State Fire Service of the Ministry of Emergency Situations of Russia, which will be made in your presence.

Production of FPS tokens of the Ministry of Emergency Situations of Russia

We are engaged in the manufacture of tokens of the Ministry of Emergency Situations of Russia of a new sample - tokens of the FPS of the Ministry of Emergency Situations of Russia. These duplicate tokens are made of high quality stainless steel, 1.5 mm thick. All work on the manufacture of a stainless steel token will be performed with you, within 15 minutes.

Production of tokens of the Ministry of Internal Affairs of Russia

You can order the production of tokens of the Ministry of Internal Affairs from us. We make these tokens only from high-quality ellipsoid-shaped stainless steel blanks. If you are a police officer who has lost his badge, we are happy to offer you to order a duplicate name badge from us.

Making tokens of the FSB of Russia

Also, in our engraving workshop, you can order FSB tokens for yourself. Our masters will make a duplicate in your presence and apply the entire necessary information. When ordering the production of an FSB token from us, you can be sure of the timing of the work and the quality of the product received.

Army tokens, production of army tokens

In our engraving workshop you can order army dog ​​tags of any type - whether it is the Russian Armed Forces or the USSR Armed Forces, and you can also order an army dog ​​tag of any other country. A military badge will be a great gift for a person who dresses in military style. By ordering this product from us, you can be sure of the quality of the product, and we are also ready to fulfill an order for the manufacture of an army dog ​​tag in Moscow in 15-20 minutes. In the hustle and bustle of life in the capital, a person does not have a lot of extra time to spend on traveling and waiting while his order is being fulfilled, so we do our work quickly, professionally and efficiently, so that in case of a hurry, all the work is done with you. Army dog ​​tags are usually made to order in two cases: either in the event that a soldier loses his personal military dog ​​tag with personal number or as a gift or souvenir.

If you have a question where to buy an army dog ​​tag in Moscow, you can feel free to contact us. We use only blanks made according to original technology and fulfilling all requirements. Army token with engraving, ordered in our workshop, will pass any checks before the authorities. Our engraved army dog ​​tag is made according to the regulations, and is indistinguishable from the dog tag that was lost. So, in case of loss of your military badge, we are waiting for you.

If you have a desire to buy engraved tokens as a gift, then we will fulfill any ideas. We have a large number of metal excellent quality, as well as all the necessary equipment for the manufacture of blanks of various sizes. A custom-made gift token will be a wonderful souvenir. Gift tokens (made for military tokens, or in general of a completely different shape and size, different from the already existing, standard tokens) You can order from us, both a single product and a wholesale order.

We are engaged in the manufacture of army dog ​​tags of the Russian Armed Forces with personal engraving, as well as old-style aluminum dog tags of the USSR Armed Forces and the Russian Armed Forces. Such a token is necessary for a military or reservist who is leaving for the reserve, which may have been lost, in this case we suggest ordering a duplicate. Also, such a token on the neck with a personal engraving can be used as a gift or a souvenir. The price of this service depends on the urgency.

Tokens for the Russian Armed Forces of a new sample, the Ministry of Emergency Situations, the Ministry of Internal Affairs, the Federal Security Service are made of ellipsoidal stainless steel.

Army dog ​​tags are engraved on blank blanks, similar to the blanks of original dog tags.

Also available are brass badge inserts for police badges. Their cost is 1900 rubles.

Making tokens

Making tokens, stuffing a personal number on a token

An army badge, with the personal number of a serviceman squeezed out on it and indicating belonging to a particular department, is a guarantee that information about the owner will be preserved even in emergency situations. A personal number is assigned to all citizens called to military service and in without fail indicated on the ID.

The token for military personnel is one of the most common types of tokens. According to the law of the Russian Federation, these information decals are an obligatory part of the full army uniform. When making a token, as well as its duplicate, Special attention should be drawn to departmental affiliation (Ministry of Internal Affairs, Armed Forces, FSB, Ministry of Emergency Situations, and so on). Stuffing a personal number on a token is usually done on the line below, after indicating the abbreviation of the department.

The manufacture of tokens in our workshop takes place in accordance with state standards, taking into account all technical requirements, as well as using special professional equipment. Army tokens are made of light non-oxidizing metals - duralumin, aluminum or stainless steel. This metal is not subject to corrosion, durable and has a pleasant appearance.

Our workshop accepts both single and bulk orders, ensuring reasonable lead times in each case. Small orders, as a rule, are carried out in the personal presence of the client. We guarantee the quality of the products ordered from us and provide an individual approach to each client.

Sometimes, by special need or at the request of the customer, a token is applied Additional Information: for example, blood type, date of birth, initials, etc. For the manufacture of authorized tokens of the military personnel of the Russian Federation, standardized blanks with a fixed thickness, length and width are used. Many years of experience in this field allows us to say without exaggeration that we know everything about our business!

You can get inquiries and professional advice at the indicated phone numbers, as well as directly in our workshop. Come and see the perfection of our service!

The purpose of the token with the personal number of a serviceman is the maximum preservation of information about its owner, despite any conditions. Given this circumstance, a metal that is not afraid of corrosion is used to make a traditional army token. Serviceman's personal number Immediately from the moment of conscription, it is assigned to those citizens who came to military service or entered military service under a contract. The assigned personal number must be recorded in the identity card. He must be reported to the close relatives of the serviceman for reference to him in case of making the necessary information.

Army badge - part of the military uniform

There are times when the token is lost. In our company, you can make a duplicate of a high-quality blank, which will fully comply with the original authorized token. Metal (aluminum, steel) will also correspond to the original sample of the token.

  • Production time: the next day after order confirmation.
  • Urgent production: 1pc within 5 hours. In case of urgent production, the cost increases by 100%.
  • Additional services:
    - A chain for a token (60 cm) - 150 rubles.

Token catalog

Russian Armed Forces

MJ of Russia

Russian Emergency Situations Ministry

Russian Navy

USSR Armed Forces

Ministry of Internal Affairs of Russia

FSB of Russia

Airborne Forces of Russia

FPS of Russia

Empty token

The production of tokens with personal numbers is primarily necessary for security, information about the owner will be preserved no matter what. It is precisely because of this that, according to the law of the Russian Federation, every serviceman must have a badge and is included in full uniform.

In the copy center Kopirka you always have the opportunity to order authorized tokens of the USSR Armed Forces, Russian Armed Forces, the Ministry of Internal Affairs, the Ministry of Emergencies, the UIS, the FSO, the FSB, the FPS, the Ministry of Justice, the Airborne Forces, the Navy and other state troops, services and departments, as well as empty plates for stuffing or engraving. At the request of the customer or the requirement of the department, the information on the product may vary, so it may contain, for example, information about blood type, date of birth, and so on.

On such metal plates, the personal number of the owner is squeezed out and the affiliation to the department is indicated. Manufacturing this product is not a complicated procedure, but requires strict compliance with state standards and must take into account all technical requirements. The procedure is performed on light and non-oxidizing metals, such metals are durable and wear-resistant due to their properties.

Now tokens are worn not only by military personnel, but also by students of cadet educational institutions, firefighters and rescuers. IN Russian Federation on the forms of various services, there is often a special pocket for an army badge.

We carry out fast and high-quality stuffing of numbers on a token that meets all standards. Urgent stuffing is also possible in the copy center Kopirka. By choosing us, you can be sure of the quality of our work and you will be satisfied!

A military dog ​​tag is a metal plate with information engraved on it, including data on the personal identification number of a military or intelligence officer, and sometimes his name, surname, blood type, unit, etc.

How to decrypt a token?

Information on the standard is located in two lines. The top line informs about the department to which the serviceman belongs, the bottom line indicates the personal number assigned to the army in the military commissariats when called up for service, signing a contract or upon arrival at the service after graduating from a military educational institution. The same number is indicated in the identity card.

The number is preceded by a letter designation - the accounting code. What exactly do the letters on the army badge mean? The combination of letters and numbers on each product is unique. The token is issued once and at the end of the service is handed over together with the certificate to the military unit.

Deciphering the token of a serviceman of the Russian Federation is extremely simple - on modern medallions, the RUSSIA Armed Forces or “Armed Forces of Russia” are indicated in the top line. The font is special, which is standard for all branches of the military.

Previously, tokens were made of aluminum or duralumin, today blanks are made of stainless steel.


Predecessor Token

The badge "AF of RUSSIA" replaced the medallion "AF of the USSR", completely preserving its design and dimensions. Badge of the USSR Armed Forces, the decoding of which means "Armed Forces of the Union of Soviet Socialist Republics", in Peaceful time issued only officers. It was received by graduates of military educational institutions and military departments of ordinary universities if they entered the service in the Armed Forces.

When they were transferred to the reserve, the officers handed over the token, and information about this was entered on the military ID. The medallions were handed over to the military commissariats at the place of registration, filed with personal files, and later issued to new conscripts.

Some servicemen made a duplicate of the badge, wanting to keep the memory of the years spent in the army, so even today you can see the souvenir badge "USSR Armed Forces".

If you wish, you can always order such a token in a specialized store. The product will practically not differ from the original, as the craftsmen use standard blanks and are able to create inscriptions that repeat those accepted in times Soviet Union standard.


Tokens for other services

The most common is the token of the Russian Armed Forces, the decoding of which is familiar to most residents of the country, since many men serve in the army. But besides the army medallion, other personal signs can be found today.

As long-term international practice has shown, a token in the form of a metal plate with a personal number - the best remedy person identification. The token withstands various kinds of loads, it is easy to carry, it the best way stores information about an individual. Therefore, many departments whose work is related to hazardous conditions labor, came to the decision to issue personal signs to their employees.

Sometimes the question arises of how to decrypt a non-military organization token. It's easy enough. The abbreviation (abbreviated name of the service) and the name of the country - Russia or the Russian Federation are written in the top line. For example, "FSB of RUSSIA" stands for " federal Service Russia's security." The bottom line contains the employee's personal number. The shape of the metal plate for such services is different from the army blank.

Guessing what the number of the token means is not so difficult. It is a combination of letters and numbers belonging to a particular employee. If necessary, it is enough to find the number in the database or file cabinet to find information about a particular person. All data is stored in the office that issued the personal badge. As in the case of the army medallion, the token allows you to identify a security officer who died or was injured in the line of duty.

Each soldier is assigned a personal number upon enlistment. Unfortunately, the need to introduce a kind of encoding is associated with the identification of the body after death. It is often difficult to identify the deceased not only to colleagues, but also to relatives, because the injuries received during the fighting have the most terrible consequences. The idea of ​​assigning a number to each soldier was implemented back in the USSR. This approach is practiced in many Western countries, but initially the idea of ​​identification originated in Ancient Greece.

Warriors before the battle attached small plates to their hands, on which the name was indicated. After death, these inscriptions made it easier to identify the warrior in order to tell the sad news to relatives. Almost the same appointment with a personal number and in the troops Russian army. The personal code is engraved on a duralumin plate, which is a token of a serviceman of the RF Armed Forces.

Despite the fact that the personal number of the serviceman printed on the token is called a "suicide bomber", its purpose is not only to identify and identify the body. This identifier acts as a password to enter your personal account on the website of the Ministry of Defense. Online, every soldier can get acquainted with the movement Money, status under the subsidy program and , salary. Thus, a personal number for a soldier has several greater value than the normal character set.

Number assignment

At first, a personal number was assigned only to officers, which was practiced back in tsarist Russia. Today, it is necessary to make a token for every soldier, regardless of his rank. Modern technologies allow you to lead in electronic format a register of military personnel, in which each is assigned a specific number. A lightweight search system allows you to identify any soldier by the number of the badge.

In order to avoid data spoofing, the assignment of the number takes place under the close supervision of the employees of the military commissariat. Before being sent directly to the service, a citizen is given a number against signature. The entry is duplicated not only in the personal file, but also in a special journal. Upon dismissal from service, a soldier, called up on conscription or a contract soldier, surrenders a token. But since a citizen is considered liable for military service, the token cannot be disposed of, it is attached to a personal file and stored. When mobilized, this token is again given to the soldier.

Find out: What liability is provided for military personnel

Deciphering the code printed on the duralumin token is not difficult, but a single format has not been provided. In addition to a personal number, information about a blood group or unit may be present. Only the code is standard; according to it, the token is subject to recovery in case of loss.

Forgery of tokens is considered as forgery of documents. The fact is that the personal code is registered in the journal. Even if you order a homemade token that will have the original size, an arbitrary number stuffed on the surface will be invalid, and disclosing the fact of a fake is fraught with sad consequences.

Wearing a token

One of the duties of a soldier is to carry a personal badge. The unit commander has the right to check the correct wearing. Although specific rules have not been regulated by law, there are unspoken rules that a soldier must follow.

  • The badge can be hung on a chain around the military's neck. It is allowed to wear a pectoral cross on the second chain. There are cases when the token and pectoral cross hung on the same chain, there are no penalties for this.
  • IN modern form for military personnel, a special place is reserved for storing a token. This is a small pocket on the pants, located between the fly and the right pocket. A serviceman taking up duty is required to wear a badge in the indicated place.

It's no secret that many tend to break the unwritten rules. So, wearing a token on a bunch of keys is considered fashionable. If punishment for this can be avoided, then accidental loss is unlikely to be avoided. Although the replacement of a token or its restoration usually turns into unpleasant proceedings for military personnel, since we are talking about improper storage.